Net::Telnet使用小记

Perl--Net::Telnet模块 1.到search.cpan.org去下载一个Net::Telnet(http://search.cpan.org/CPAN/authors/id/J/JR/JROGERS/Net-Telnet-3.03.tar.gz) 2. a. Create a makefile by running Makefile.PL using the perl program into whose 阅读详情
use strict;
use warnings;
use Net::Telnet;

my $tnet=new Net::Telnet('Host'=>'127.0.0.1','Timeout'=>3,'Dump_Log'=>'test.log');
$tnet->waitfor('Match'=>"/login:/");
$tnet->print("fibbery");
$tnet->waitfor('Match'=>"/password:/");
$tnet->print("password");
$tnet->waitfor('/\>/');
$tnet->print("dir");
$tnet->errmode("return");
while(my $data=$tnet->get('Timeout'=>9999999))#设置一个合适的超时,不至于使程序没运行结束而终止等待
{
    print($data);
    if($data=~/fibbery\>/)#此处判断何时程序运行结束
    {
        last;
    }
}
$tnet->print("exit");
$tnet->close();


 

node-telnet-client:Node.js的简单telnet客户端 节点远程客户端 Node.js的简单telnet客户端 安装 在您的项目本地或全球范围内: npm install telnet-client npm install -g telnet-client 快速开始 异步/等待(Node.js> = 7.6.0) 'use strict' const Telnet = require ( 'telnet-client' ) async function run ( ) { let connection = new Telnet ( ) // these parameters are just examples and most probably won't work for your use-case. let params = { host : '127.0.0.1' , port : 23 , she 立即下载

相关推荐

perl-Net-Telnet-3.05-3.el8.tar.gz

# 适用操作系统:Centos8 #Step1、解压 tar -zxvf xxx.el8.tar.gz #Step2、进入解压后的目录,执行安装 sudo rpm -ivh *.rpm

net 及netstat用法

netstat -an

一个懒鬼的博客 1090

Net::Telnet::Cisco::IOS-开源

一个Perl软件包,扩展了Net :: Telnet :: Cisco,提供了一种简单的方法来从运行IOS的Cisco设备获取信息并进行基本配置。

perl的expect发送特殊字符问题

<br />项目里面用到expect登录一台主机<br />口令是BI_wgjk_#@!<br />用<br />  #$exp->send('BI_wgjk_#@!'."/n");    #错误<br />  #$exp->send('BI_wgjk_#/@!'."/n");  #正确<br />  $exp->send("BI_wgjk_#///@!/n");    #正确<br />可以看到expect对于perl的特殊字符@ 的处理,不是透明的<br />即使用了单引号也不行,必须加一次转义<br

laputa73的专栏 2223

升降机SEW MOVIDRIVE变频器设置

选择PO1 第2,3,9,13 位,点击“SendPA”Start reference,编码器反馈值为0(PI2/3 Actual position=0)提示:传送参考位置前请断开变频器安全24V电源,否则会弹出禁止修改提示框;提示:做这一步时,如果出现电机不能转动,或产生报警不能通过编码器匹配。下载配置的参数,提示:下载参数需要断开变频器的安全24V电源。编码器匹配通过后点击下一步,进入下图画面传送参考位置。1电机不能转动:a可能是由于变频器的安全24V未给。点击2.SEW总线扩展定位,定位块设置。

xdpcxq的专栏 5397

告别WSL!用AMD ROCm7在Windows上跑ComfyUI,我的幻x2025 AI Max+ 395体验与性能调优心得

本文详细介绍了在搭载AMD Ryzen AI Max+ 395处理器的幻x2025笔记本上,如何通过ROCm7在Windows原生环境下高效运行ComfyUI,并分享了一系列性能调优技巧和实战经验,帮助开发者摆脱WSL束缚,提升AI创作效率。

weixin_29102619的博客 1115

expect telnet 发送邮件

python通过smtplib链接到smtp.163.com可以正常发送,换perl就不行了。很诡异的事件啊。perl程序大致代码如下:use Net::SMTP;$smtp = Net::SMTP->new(smtp.163.com, Hello => smtp.163.com, Timeout => 120, Debug => 1);

smallfish | http://chenxiaoyu.org/blog 1284

别再乱调栅极电阻了!手把手教你用示波器调试FOC驱动MOS管,避开EMC和震荡坑

本文详细介绍了FOC驱动中MOS管栅极参数的精准调试方法,涵盖示波器配置、波形特征分析及栅极电阻选型策略。通过实战案例和工程经验,帮助工程师有效解决EMC和震荡问题,提升驱动电路稳定性和效率。

weixin_28728495的博客 502

perl 学习小结

Normal 0 false false false EN-US ZH-CN X-NONE

hanyuejun2006的专栏 1156

【Basis】Lumerical licence center 无法连接的问题

端口,我们需要确认该端口是否被其他程序占用。这里我们将介绍如何处理这一问题。后,今天电脑更新后我无法打开。终结占用该端口的程序后再次打开。

u011699626的博客 314

9.6华为OD机试真题 新系统【仓储货物有序出库】

华为OD机试真题 新系统【仓储货物有序出库】,提供C语言、Java、C++、Python、Go、JavaScript源码实现,并提供完整思路讲解,以及在线OJ模拟做题。华为OD机试真题 【仓储货物有序出库】多语言题解。

qq_45776114的博客 885

Net::Telnet模块的使用

看到的dump log总是显示undetermine terminal type。 ##Moduleimport. useNet::Telnetqw(TELNET_IACTELNET_SBTELNET_SETELOPT_TTYPE); ##Globalvariables...

chuanxifu4422的博客 441

推荐系统[九]项目技术细节讲解z2:搜索Query理解[Term Weight、Query 改写、同义词扩写]和语义召回技术

在 pooling 方法上,我们也尝试过不同层 pooling,或者在多层上增加 attention 聚合 BERT 多层结果,效果和最后一层所有 token 做 average pooling 相当。损失函数方面,在排序阶段使用pairwise比 pointwise 损失函数的效果会更好。

丨汀、的博客 1109

Net::Telnet库使用

<br />今天写了一个通过telnet远程控制APC电源远程控制的脚本。调试Net::telnet库费了点时间, 所以打算将其记录下来。<br />sub operate_apc_server { my $param_ref = shift; my $port = $param_ref->{port}; my $action = $param_ref->{action}; my $list = $param_ref->{list}; my $telnet

Ian Zhang的专栏 4551

【网络与爬虫 53】Scrapy-Prometheus实战指南:打造企业级爬虫监控体系的终极解决方案

本文深入探讨Scrapy-Prometheus集成技术,通过费曼学习法从监控痛点出发,详细讲解如何在Scrapy爬虫中集成Prometheus指标收集系统。涵盖从基础配置到企业级监控体系的完整实战指南,帮助开发者构建可观测性强、可维护性高的分布式爬虫监控平台,实现爬虫性能的精准监控和智能告警。

熵数实验室 1584

深入浅出讲解外部服务提供者 OAuth 2.0 帐户客户端创建与 ABAP 系统集成

本文详细介绍了在SAP ABAP平台配置OAuth 2.0客户端以安全调用外部Web服务的完整流程。主要内容包括:首先需要在外部服务提供者平台注册OAuth客户端,获取client ID和client secret;其次需特别注意重定向URI必须是公开可访问的地址;然后在ABAP系统中通过事务码OA2C_CONFIG配置OAuth客户端信息;最后阐述了常见的错误排查方法。文章强调了OAuth 2.0作为SAP系统与外部服务安全集成的标准协议,正确配置客户端是确保后续API调用安全可靠的关键前提。

2007 年 ~ 2025 年,深耕 SAP 技术 18 年 1734

perl中Net::Telnet的errmode使用方法

Net::Telnet模块中errmode可以设置出错时的处理方式: errmode:共有四个值,这里讨论两种,die和return $mode = $obj->errmode;  # 这种方式是获得当前的出错时的处理方式的值,默认是"die" $premode = $obj->errmode($mode); #这种方式是定义一个新的出错时的处理方式的值,并返回之前的值

勤劳的小蜜蜂 1045

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

Windows开启Telnet功能与.NET功能的详细指南

通过本文的介绍,你了解了如何在Windows系统中开启Telnet和.NET功能,并通过示例代码展示了它们的使用效果。Telnet是一个有用的远程管理工具,而.NET Framework则是开发Windows应用程序的基础。希望本文能对你有所帮助,如果你有任何问题或建议,请随时留言交流。

m0_37643701的博客 1160

LinePhone3.2.7(android端最新版本) sip客户端

SIP客户端For android:LinePhone3.2.7(最新版本),官网地址:http://www.linphone.org/

计算机控制技术及应用

《计算机控制技术及应用》通过总结作者的科研成果和吸收国内外的先进理论、方法和技术,以计算机控制系统的网络化、开放化、智能化和集成化发展趋势为主线索,主要介绍计算机控制系统的基本概念和计算机控制系统的典型形式,计算机控制系统的数学描述与基本分析方法,以及数字PID控制器、最少拍控制系统、达林算法、状态变量设计法等设计方法及其各种改进算法。重点突出计算机控制系统输入输出通道接口的设计方法和典型控制系统的设计案例与实现方法等。

linux perl telnet安装,Perl--Net::Telnet模块

1.到search.cpan.org去下载一个Net::Telnet(http://search.cpan.org/CPAN/authors/id/J/JR/JROGERS/Net-Telnet-3.03.tar.gz)2.a. Create a makefile by running Makefile.PL using the perlprogram into whose library yo...

weixin_35676745的博客 354

visio安装包

Microsoft Office Visio 是一款专业的制图软件。利用经过更新的形状、协作工具和数据链接图表,创建专业级图表以简化复杂的信息。

linux perl telnet安装,linux @ Net :: Telnet和vt-100终端的Perl问题

我需要Net:Telnet的帮助。尝试连接到VT-100终端。从控制台使用正常的telnet时,它工作正常。我可以连接和发布命令,但是当我尝试从perl中得到相同的结果时,它会连接,但之后没有任何反应 - 我没有输出或等待超时或显示提示符不匹配(但它是它的,因为它总是三个字母和>符号)。 我尝试了所有可能的方法 - >使用print,cmd,put等方法,但没有任何成功,并在该事情上停...

weixin_34586802的博客 157

linux perl telnet安装,在perl中使用Telnet時遇到麻煩?

我遇到了一些麻煩發送命令,並從我設置的telnet連接接收文本/數據。在perl中使用Telnet時遇到麻煩?#!perl#Telnet.pluse Net::Telnet;# Create a new instance of Net::Telnet,my $telnetCon = new Net::Telnet (Timeout => 20,Dump_Log => "dump.log...

weixin_30480281的博客 186

perl 安装 Net::Telnet 模块

apache的错误日志: Can't locate Net/Telnet.pm in @INC (@INC contains: C:/Perl/lib C:/Perl/site/lib .) at e:\proj\php\san2\SOURCE~1\WEBSER~1\system\SNMPMG~1.PL line 3. Can't locate object method "new" vi...

weixin_34186950的博客 392

脚本telnet失败,而host上直接telnet是成功的

直接在host上telnet XXXX是可以的,在pc1上直接运行tqtest也是可以的,但是从auto中运行脚本就会报错: Connection closed by foreign host. 并且在/var/log/messages中显示: Aug 14 22:55:42 VTB93-PC2 xinetd[18654]: START: telnet pid=18688 from=13

勤劳的小蜜蜂 1419
上一篇: 局部静态变量的初始化与异常
下一篇: 【转】C++异常中的堆栈跟踪
fibbery
博客等级 码龄25年 304粉丝 32原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值