centos7 编译构建 zabbix 7.0 rpm

原创 于 2025-01-21 15:21:38 发布 · 921 阅读 · 25 ·
CC 4.0 BY-SA版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
文章标签：

#zabbix

部署运行你感兴趣的模型镜像

项目地址

链接
centos_7_zabbix_5.0.x_mysql
centos_7_zabbix_7.0.x_mysql
centos_7_zabbix_7.0.x_pgsql
rocky_8_zabbix_6.0.x_mysql
rocky_8_zabbix_6.0.x_pgsql
rocky_8_zabbix_7.0.x_mysql
rocky_8_zabbix_7.0.x_pgsql
zabbix_6.0.x_docker
zabbix_6.0.x_dockerfile
zabbix_7.0.x_docker
zabbix_7.0.x_dockerfile
zabbix_api
zabbix_7.0.x_build

警告！警告！警告！

！！！重要的事情说三遍！！！
千万不要将 /usr/local/lib 和 /usr/local/lib64 添加到 /etc/ld.so.conf 文件或 /etc/ld.so.conf.d 目录
千万不要将 /usr/local/lib 和 /usr/local/lib64 添加到 /etc/ld.so.conf 文件或 /etc/ld.so.conf.d 目录
千万不要将 /usr/local/lib 和 /usr/local/lib64 添加到 /etc/ld.so.conf 文件或 /etc/ld.so.conf.d 目录
！！！重要的事情说三遍！！！

# 完全编译完成后磁盘使用情况
[root@localhost ~]# du -sh /usr/local/
28G	/usr/local/
[root@localhost ~]#

yum 安装编译工具及依赖

yum -y install gcc-c++ glibc-devel m4 libtool unzip python-devel rpm-build policycoreutils-devel xz-devel 

libtool --finish /usr/local/lib
libtool --finish /usr/local/lib64
libtool --finish /usr/local/opt/glibc/lib
go env -w GO111MODULE=on && \
go env -w GOPROXY=https://goproxy.cn,direct && \
go env -w GOBIN=/usr/local/opt/go/bin
declare -x ACLOCAL_PATH="/usr/local/share/aclocal/"
declare -x LD_LIBRARY_PATH="/usr/local/src/perl5-5.26.3:/usr/local/lib:/usr/local/lib64"
declare -x JAVA_HOME=/usr/local/lib/jvm/jdk1.8.0_202
declare -x JRE_HOME=${JAVA_HOME}/jre  
declare -x CLASSPATH=.:${JAVA_HOME}/lib:${JRE_HOME}/lib
declare -x JAVA_PATH=${JAVA_HOME}/bin:${JRE_HOME}/bin
declare -x PATH="${JAVA_PATH}:/usr/local/opt/venv_37_centos7/bin:/usr/local/opt/go/bin:/usr/local/opt/glibc/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin"
declare -x PKG_CONFIG_PATH="/usr/local/lib/pkgconfig:/usr/local/lib64/pkgconfig"
# 如果想启用yum打开下面的LD_PRELOAD变量，关闭使用unset LD_PRELOAD
# export LD_PRELOAD="/usr/lib64/liblzma.so.5:/usr/local/lib64/libcrypto.so.1.1:/usr/local/lib64/libssl.so.1.1"

pkg-config --cflags --libs libffi
pkg-config --cflags --libs libreadline
pkg-config --modversion nettle
pkg-config --modversion libreadline

# install python-devel bzip2 unixODBC unixODBC-devel device-mapper rpm libaio* rpm-build libxml2-devel bzip2-devel libpng-devel libjpeg-devel freetype-devel readline-devel libxslt-devel elfutils-libelf-devel

编译安装make

编译安装make ^make

https://ftp.gnu.org/gnu/make/make-4.2.1.tar.gz
tar -zxvf /opt/make-4.2.1.tar.gz -C /usr/local/src
cd /usr/local/src/make-4.2.1
mkdir build
cd build
../configure --prefix=/usr/local/
make -j4 && make install
ln -sf /usr/local/bin/make /usr/local/bin/gmake

编译安装gcc

编译安装gmp ^gmp

https://gmplib.org/download/gmp/gmp-6.1.2.tar.xz
tar -xvf /opt/gmp-6.1.2.tar.xz -C /usr/local/src
cd /usr/local/src/gmp-6.1.2
mkdir build
cd build
../configure --prefix=/usr/local
make -j4 && make install

编译安装mpfr ^mpfr

[[[#^gmp|依赖 gmp]]]
依赖 gmp

  1. 下载安装包
https://www.cnblogs.com/zhiminyu/p/18267733
http://www.multiprecision.org/downloads/mpfr-3.1.6.tar.gz
tar -zxvf /opt/mpfr-3.1.6.tar.gz -C /usr/local/src
cd /usr/local/src/mpfr-3.1.6
mkdir build
cd build
../configure --prefix=/usr/local --with-gmp=/usr/local
make -j4 && make install

编译安装mpc ^mpc

[[[#^mpfr|依赖 mpfr]]] | [[[#^gmp|依赖 gmp]]]
依赖 mpfr | 依赖 gmp

  1. 下载安装包
https://www.cnblogs.com/zhiminyu/p/18267733
http://www.multiprecision.org/downloads/mpc-0.9.tar.gz
tar -zxvf /opt/mpc-0.9.tar.gz -C /usr/local/src
cd /usr/local/src/mpc-0.9
mkdir build
cd build
../configure --prefix=/usr/local --with-gmp=/usr/local --with-mpfr=/usr/local
make -j4 && make install

编译安装isl ^isl

[[[#^gmp|依赖 gmp]]]
依赖 gmp

  1. 下载安装包
https://libisl.sourceforge.io/isl-0.16.1.tar.gz
tar -zxvf /opt/isl-0.16.1.tar.gz -C /usr/local/src
cd /usr/local/src/isl-0.16.1
mkdir build
cd build
../configure --prefix=/usr/local --with-gmp-prefix=/usr/local
make -j4 && make install

编译安装gcc ^gcc

[[[#^mpc|依赖 mpc]]] | [[[#^gmp|依赖 gmp]]] | [[[#^mpfr|依赖 mpfr]]] | [[[#^isl|依赖 isl]]]
依赖 mpc | 依赖 gmp | 依赖 mpfr | 依赖 gmp | 依赖 isl

  1. 下载安装包
https://ftp.gnu.org/gnu/gcc/gcc-8.5.0/gcc-8.5.0.tar.gz
tar -zxvf /opt/gcc-8.5.0.tar.gz -C /usr/local/src
cd /usr/local/src/gcc-8.5.0
mkdir build
cd build
../configure --prefix=/usr/local --enable-checking=release --enable-languages=c,c++ --disable-multilib --enable-linker-build-id --with-gmp=/usr/local --with-gmp-include=/usr/local/include --with-gmp-lib=/usr/local/lib --with-mpfr=/usr/local --with-mpfr-include=/usr/local/include --with-mpfr-lib=/usr/local/lib --with-mpc=/usr/local --with-mpc-include=/usr/local/include --with-mpc-lib=/usr/local/lib -with-isl=/usr/local --with-isl-lib=/usr/local/lib --with-isl-include=/usr/local/include
make -j4
make -j4 install
ln -sf /usr/local/bin/gcc /usr/local/bin/cc

----------------------------------------------------------------------
Libraries have been installed in:
   /usr/local/gcc-8.5.0/gcc/lib/../lib64

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------

编译安装 m4 ^m4

https://ftp.gnu.org/gnu/m4/m4-1.4.18.tar.gz
tar -zxvf /opt/m4-1.4.18.tar.gz -C /usr/local/src
cd /usr/local/src/m4-1.4.18
mkdir build
cd build
../configure --prefix=/usr/local
make -j4
make -j4 install

编译安装 automake ^automake

[[[#^m4|依赖 m4]]]
依赖 m4

https://ftp.gnu.org/gnu/automake/automake-1.16.1.tar.gz
tar -zxvf /opt/automake-1.16.1.tar.gz -C /usr/local/src
cd /usr/local/src/automake-1.16.1
mkdir build
cd build
../configure --prefix=/usr/local
make -j4
make -j4 install

编译安装 autoconf ^autoconf

[[[#^automake|依赖 automake]]]
依赖 automake

http://mirrors.kernel.org/gnu/autoconf/autoconf-2.69.tar.gz
tar -zxvf /opt/autoconf-2.69.tar.gz -C /usr/local/src
cd /usr/local/src/autoconf-2.69
mkdir build
cd build
declare -x M4=/usr/local/bin/m4
../configure --prefix=/usr/local
make -j4
make -j4 install

编译安装libtool ^libtool

https://mirrors.sjtug.sjtu.edu.cn/gnu/libtool/libtool-2.4.6.tar.gz
tar -zxvf /opt/libtool-2.4.6.tar.gz -C /usr/local/src
cd /usr/local/src/libtool-2.4.6
mkdir build
cd build/
# ../configure --prefix=/usr/local/libtool-2.4.6/libtool
../configure --prefix=/usr/local
make -j4 && make install

\cp -vrf /usr/local/libtool-2.4.6/libtool/share/aclocal/ /usr/local/share/

编译安装bzip2 ^bzip2

https://sourceware.org/pub/bzip2/bzip2-1.0.7.tar.gz
tar -zxvf /opt/bzip2-1.0.7.tar.gz -C /usr/local/src
cd /usr/local/src/bzip2-1.0.7
make -j4
make -j4 install PREFIX=/usr/local
make clean
make -j4 -f Makefile-libbz2_so
make -j4 install PREFIX=/usr/local
\cp libbz2.so.1.0* /usr/local/lib/

编译安装pkgconf ^pkgconf

https://codeload.github.com/pkgconf/pkgconf/tar.gz/refs/tags/pkgconf-1.4.2
tar -zxvf /opt/pkgconf-pkgconf-1.4.2.tar.gz -C /usr/local/src
cd /usr/local/src/pkgconf-pkgconf-1.4.2
autoreconf -vifs
mkdir build
cd build
../configure --prefix=/usr/local --enable-shared
make -j4
make -j4 install

编译安装glibc

编译perl ^perl

https://codeload.github.com/Perl/perl5/tar.gz/refs/tags/v5.26.3
tar -xvf /opt/perl5-5.26.3.tar.gz -C /usr/local/src
cd /usr/local/src/perl5-5.26.3/
./Configure -des -Dprefix=/usr/local -Duseshrplib  -Dusethreads -Uversiononly
make -j4
make -j4 install

编译bison ^bison

[[[#^perl|依赖 perl]]]
依赖 perl

http://ftp.gnu.org/gnu/bison/bison-3.0.4.tar.xz
tar -xvf /opt/bison-3.0.4.tar.xz -C /usr/local/src
cd /usr/local/src/bison-3.0.4
mkdir build
cd build
../configure --prefix=/usr/local
make -j4
make  -j4 install

编译安装glibc ^glibc

[[[#^bison|依赖 bison]]]
依赖 bison

  1. 下载安装包
https://ftp.gnu.org/gnu/glibc/glibc-2.28.tar.gz
tar -zxvf /opt/glibc-2.28.tar.gz -C /usr/local/src
cd /usr/local/src/glibc-2.28
mkdir build
cd build
mkdir -p /usr/local/opt
../configure --prefix=/usr/local/opt/glibc  --enable-shared --bindir=/usr/local
make -j4 && make install

cmake编译安装

编译安装openssl ^openssl

https://openssl-library.org/source/old/1.1.1/index.html
tar -zxvf /opt/openssl-1.1.1w.tar.gz -C /usr/local/src
cd /usr/local/src/openssl-1.1.1w
mkdir build
cd build
../config --shared enable-ssl3 enable-ssl3-method enable-mdc2 enable-md2 --prefix=/usr/local 
make -j4 && make install

编译zlib ^zlib

https://zlib.net/fossils/zlib-1.2.11.tar.gz
tar -zxvf /opt/zlib-1.2.11.tar.gz -C /usr/local/src
cd /usr/local/src/zlib-1.2.11
mkdir build
cd build
../configure --prefix=/usr/local
make -j4 && make install

编译安装pam ^pam

https://codeload.github.com/linux-pam/linux-pam/tar.gz/refs/tags/v1.3.1
tar -xvf /opt/Linux-PAM-1.3.1.tar.xz -C /usr/local/src
cd /usr/local/src/Linux-PAM-1.3.1
mkdir build
cd build
../configure --prefix=/usr/local
make -j4 && make install
mkdir -p /usr/local/include/security
mv -vf /usr/local/include/pam* /usr/local/include/security
mv -vf /usr/local/include/_pam_* /usr/local/include/security

编译安装openssh ^openssh

[[[#^openssl|依赖 openssl]]] | [[[#^pam|依赖 pam]]] | [[[#^zlib|依赖 zlib]]]
依赖 openssl | 依赖 pam | 依赖 zlib

https://cdn.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-8.0p1.tar.gz
tar -zxvf /opt/openssh-8.0p1.tar.gz -C /usr/local/src
cd /usr/local/src/openssh-8.0p1
mkdir build
cd build

../configure --prefix=/usr/local  --with-ssl-dir=/usr/local --with-zlib=/usr/local --with-md5-passwords --with-pam

make -j4
make install

编译安装cmake ^cmake

[[[#^openssl|依赖 openssl]]] | [[[#^gcc|依赖 gcc]]]
依赖 openssl | 依赖 gcc

https://cmake.org/files/v3.16/cmake-3.16.8.tar.gz
tar -zxvf /opt/cmake-3.16.8.tar.gz -C /usr/local/src
cd /usr/local/src/cmake-3.16.8
mkdir build
cd build
../bootstrap --prefix=/usr/local
gmake -j4 && gmake install

python3.7编译安装

编译libffi ^libffi

https://codeload.github.com/libffi/libffi/tar.gz/refs/tags/v3.4.4
tar -zxvf /opt/libffi-3.4.4.tar.gz -C /usr/local/src
cd /usr/local/src/libffi-3.4.4
mkdir build
cd build
../configure --prefix=/usr/local
make -j4
make -j4 install
ln -sf /usr/local/lib64/libffi.so /usr/local/lib/libffi.so

编译python3.7 ^python37

[[[#^zlib|依赖 zlib]]] | [[[#^libffi|依赖 libffi]]] | [[[#^openssl|依赖 openssl]]]
依赖 zlib | 依赖 libffi | 依赖 openssl

https://mirrors.huaweicloud.com/python/3.7.0/
tar -xvf /opt/Python-3.7.0.tar.xz -C /usr/local/src
cd /usr/local/src/Python-3.7.0
mkdir build
cd build

../configure --prefix=/usr/local --with-openssl=/usr/local --enable-shared
make -j4
make install

编译pycurl ^pycurl

[[[#^openssl|依赖 openssl]]]
依赖 openssl

# 解决yum无法使用问题
https://pypi.org/project/pycurl/7.43.0.3/#files
tar -zxvf /opt/pycurl-7.43.0.3.tar.gz -C /usr/local/src
cd /usr/local/src/pycurl-7.43.0.3/

python3 setup.py  --with-openssl install
python2 setup.py  --with-openssl install

git编译安装

编译pcre2 ^pcre2

https://github.com/PCRE2Project/pcre2/releases?page=2
tar -xvf /opt/pcre2-10.32.tar.gz -C /usr/local/src
cd /usr/local/src/pcre2-10.32/
mkdir build
cd build
../configure --prefix=/usr/local --enable-pcre2grep-libz
make -j4
make -j4 install

编译安装libssh2 ^libssh2

[[[#^openssl|依赖 openssl]]] | [[[#^zlib|依赖 zlib]]]
依赖 zlib | 依赖 openssl

  1. 下载安装包
https://libssh2.org/download/libssh2-1.11.1.tar.xz
tar -xvf /opt/libssh2-1.11.1.tar.xz -C /usr/local/src
cd /usr/local/src/libssh2-1.11.1
mkdir cmake-build
cd cmake-build/
cmake -D OPENSSL_ROOT_DIR="/usr/local" -D CMAKE_INSTALL_PREFIX=/usr/local -D OPENSSL_CRYPTO_LIBRARY="/usr/local/lib64/libcrypto.so" -D OPENSSL_SSL_LIBRARY="/usr/local/lib64/libssl.so" -D ZLIB_INCLUDE_DIR="/usr/local/include" -D ZLIB_LIBRARY="/usr/local/lib/libz.so" ..

gmake -j4 && gmake install

编译安装berkeley-db ^berkeley-db

[[[#^libtool|依赖 libtool]]]
依赖 libtool

http://download.oracle.com/berkeley-db/db-5.1.29.tar.gz
tar -zxvf /opt/db-5.1.29.tar.gz -C /usr/local/src
cd /usr/local/src/db-5.1.29
mkdir build
cd build/
../dist/configure --prefix=/usr/local
make -j4 && make install

编译安装openldap ^openldap

[[[#^berkeley-db|依赖 berkeley-db]]]
依赖 berkeley-db

  1. 下载安装包
https://www.openldap.org/software/download/OpenLDAP/openldap-release/openldap-2.4.46.tgz
tar -zxvf /opt/openldap-2.4.46.tgz -C /usr/local/src
yum install libtool-ltdl-devel -y

cd /usr/local/src/openldap-2.4.46
mkdir build
cd build/

../configure --prefix=/usr/local
make depend
make -j4 && make install

编译curl ^curl

[[[#^openssl|依赖 openssl]]] | [[[#^zlib|依赖 zlib]]] | [[[#^libssh2|依赖 libssh2]]] | [[[#^openldap|依赖 openldap]]]
依赖 openssl | 依赖 zlib | 依赖 libssh2 | 依赖 openldap

https://curl.se/download/curl-7.61.1.tar.gz
tar -zxvf /opt/curl-7.61.1.tar.gz -C /usr/local/src
cd /usr/local/src/curl-7.61.1/
mkdir build
cd build

declare -x LDFLAGS="-L/usr/local/zlib-1.2.11/zlib/lib -lz -Wl,--as-needed -Wl,-rpath,/usr/local/zlib-1.2.11/zlib/lib -Wl,--build-id -Wl,--gc-sections -L/usr/local/libssh2-1.11.1/libssh2/lib64 -lssh2 -Wl,--as-needed -Wl,-rpath,/usr/local/libssh2-1.11.1/libssh2/lib64 -Wl,--build-id -Wl,--gc-sections -L/usr/local/openssl-1.1.1w/openssl/lib -lssl -Wl,--as-needed -Wl,-rpath,/usr/local/openssl-1.1.1w/openssl/lib -Wl,--build-id -Wl,--gc-sections -L/usr/local/openssl-1.1.1w/openssl/lib -lcrypto -Wl,--as-needed -Wl,-rpath,/usr/local/openssl-1.1.1w/openssl/lib -Wl,--build-id -Wl,--gc-sections -L/usr/local/openldap-2.4.46/openldap/lib -lldap -Wl,--as-needed -Wl,-rpath,/usr/local/openldap-2.4.46/openldap/lib -Wl,--build-id -Wl,--gc-sections"

declare -x CPPFLAGS="-I/usr/local/zlib-1.2.11/zlib/include -I/usr/local/libssh2-1.11.1/libssh2/include -I/usr/local/openssl-1.1.1w/include -I/usr/local/openldap-2.4.46/openldap/include"

../configure --prefix=/usr/local --with-zlib=/usr/local --with-libssh2=/usr/local --with-ssl=/usr/local --without-nss --with-ldap-lib=ldap

make -j4
make install

编译expat ^expat

https://github.com/libexpat/libexpat/releases/tag/R_2_2_5
tar -jxvf /opt/expat-2.2.5.tar.bz2 -C /usr/local/src
cd /usr/local/src/expat-2.2.5/
mkdir build
cd build
../configure --prefix=/usr/local
make -j4 
make -j4 install

编译libiconv ^libiconv

https://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.16.tar.gz
tar -zxvf /opt/libiconv-1.16.tar.gz -C /usr/local/src
cd /usr/local/src/libiconv-1.16/
mkdir build
cd build
../configure --prefix=/usr/local
make -j4 
make -j4 install

编译git ^git

[[[#^pcre2|依赖 pcre2]]] | [[[#^openssl|依赖 openssl]]] | [[[#^libpcre2|依赖 libpcre2]]] | [[[#^perl|依赖 perl]]] | [[[#^zlib|依赖 zlib]]] | [[[#^curl|依赖 curl]]] | [[[#^expat|依赖 expat]]] | [[[#^iconv|依赖 iconv]]]
依赖 pcre2 | 依赖 openssl | 依赖 libpcre2 | 依赖 perl | 依赖 zlib | 依赖 curl | 依赖 expat | 依赖 iconv

https://www.kernel.org/pub/software/scm/git/git-2.43.0.tar.gz
tar -zxvf /opt/git-2.43.0.tar.gz -C /usr/local/src
cd /usr/local/src/git-2.43.0/
./configure --prefix=/usr/local --with-openssl --with-libpcre2 --with-perl=/usr/local/bin/perl --with-zlib=/usr/local --with-curl --with-expat --with-iconv=/usr/local
make -j4
make -j4 install

MariaDB-server编译安装

编译fmt ^fmt

https://github.com/fmtlib/fmt/releases/download/11.0.2/fmt-11.0.2.zip
unzip /opt/fmt-11.0.2.zip -d /usr/local/src/
cd /usr/local/src/fmt-11.0.2
mkdir cmake-build
cd cmake-build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr/local
gmake -j4
gmake -j4 install

编译zstd ^zstd

https://github.com/facebook/zstd/releases/tag/v1.4.1
tar -zxvf /opt/zstd-1.4.1.tar.gz -C /usr/local/src
cd /usr/local/src/zstd-1.4.1/build/cmake/
mkdir cmake-build
cd cmake-build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr/local
make -j4
make -j4 install

编译icu ^icu

https://github.com/unicode-org/icu/releases/tag/release-60-3
tar -zxvf /opt/icu4c-60_3-src.tgz -C /usr/local/src
cd /usr/local/src/icu
mkdir build 
cd build
../source/configure --prefix=/usr/local
make -j4
make install

编译boost ^boost

[[[#^icu|依赖 icu]]]
依赖 icu

https://archives.boost.io/release/1.81.0/source/boost_1_81_0.tar.gz
tar -zxvf /opt/boost_1_81_0.tar.gz -C /usr/local/src
cd /usr/local/src/boost_1_81_0
./bootstrap.sh --prefix=/usr/local --with-icu=/usr/local
./b2 install

编译libmd ^libmd

https://archive.hadrons.org/software/libmd/libmd-1.1.0.tar.xz
tar -xvf /opt/libmd-1.1.0.tar.xz -C /usr/local/src
cd /usr/local/src/libmd-1.1.0/
mkdir build
cd build
../configure --prefix=/usr/local
make -j4
make -j4 install

编译gettext ^gettext

https://ftp.gnu.org/pub/gnu/gettext/gettext-0.19.8.tar.gz
tar -zxvf /opt/gettext-0.19.8.tar.gz -C /usr/local/src
cd /usr/local/src/gettext-0.19.8/
mkdir build
cd build
../configure --prefix=/usr/local
make -j4 
make -j4 install

编译ncurses ^ncurses

http://ftp.gnu.org/pub/gnu/ncurses/ncurses-6.1.tar.gz
tar -zxvf /opt/ncurses-6.1.tar.gz -C /usr/local/src
cd /usr/local/src/ncurses-6.1/
mkdir build
cd build
../configure --prefix=/usr/local --with-shared --with-gpm --with-libtool --with-normal --with-debug --enable-overwrite --enable-pc-files
make -j4 
make -j4 install

编译nettle ^nettle

[[[#^gmp|依赖 gmp]]]
依赖 gmp

https://ftp.gnu.org/gnu/nettle/nettle-3.4.1.tar.gz
tar -zxvf /opt/nettle-3.4.1.tar.gz -C /usr/local/src
cd /usr/local/src/nettle-3.4.1/
mkdir build
cd build
../configure --prefix=/usr/local
make -j4
make -j4 install
chmod +x /usr/local/nettle-3.4.1/nettle/lib64/*.so

编译libtasn1 ^libtasn1

https://ftp.gnu.org/gnu/libtasn1/libtasn1-4.13.tar.gz
tar -zxvf /opt/libtasn1-4.13.tar.gz -C /usr/local/src
cd /usr/local/src/libtasn1-4.13/
mkdir build
cd build
../configure --prefix=/usr/local
make -j4 
make -j4 install

编译libunistring ^libunistring

https://ftp.gnu.org/gnu/libunistring/libunistring-0.9.9.tar.gz
tar -zxvf /opt/libunistring-0.9.9.tar.gz -C /usr/local/src
cd /usr/local/src/libunistring-0.9.9/
mkdir build
cd build
../configure --prefix=/usr/local
make -j4 
make -j4 install

编译libidn2 ^libidn2

https://ftp.gnu.org/gnu/libidn/libidn2-2.2.0.tar.gz
tar -zxvf /opt/libidn2-2.2.0.tar.gz -C /usr/local/src
cd /usr/local/src/libidn2-2.2.0/
mkdir build
cd build
../configure --prefix=/usr/local
make -j4 
make -j4 install

编译unbound ^unbound

[[[#^openssl|依赖 openssl]]] | [[[#^expat|依赖 expat]]]
依赖 openssl | 依赖 expat

https://codeload.github.com/NLnetLabs/unbound/tar.gz/refs/tags/release-1.16.2
tar -zxvf /opt/unbound-release-1.16.2.tar.gz -C /usr/local/src
cd /usr/local/src/unbound-release-1.16.2/
./configure --prefix=/usr/local --with-ssl=/usr/local --with-libexpat=/usr/local
make -j4 
make -j4 install

编译p11-kit ^p11-kit

[[[#^libtasn1|依赖 libtasn1]]] | [[[#^libffi|依赖 libffi]]]
依赖 libtasn1 | 依赖 libffi

https://github.com/p11-glue/p11-kit/releases/tag/0.23.22
tar -xvf /opt/p11-kit-0.23.22.tar.xz -C /usr/local/src
cd /usr/local/src/p11-kit-0.23.22/
mkdir build
cd build
../configure --prefix=/usr/local
make -j4 
make -j4 install

编译gnutls ^gnutls

[[[#^gmp|依赖 gmp]]] | [[[#^libunistring|依赖 libunistring]]] | [[[#^unbound|依赖 unbound]]] | [[[#^libtasn1|依赖 libtasn1]]] | [[[#^nettle|依赖 nettle]]] | [[[#^p11-kit|依赖 p11-kit]]] | [[[#^libidn2|依赖 libidn2]]]
依赖 gmp | 依赖 libunistring | 依赖 unbound | 依赖 libtasn1 | 依赖 nettle | 依赖 p11-kit | 依赖 libidn2

http://www.ring.gr.jp/pub/net/gnupg/gnutls/v3.6/gnutls-3.6.16.tar.xz
tar -xvf /opt/gnutls-3.6.16.tar.xz -C /usr/local/src
cd /usr/local/src/gnutls-3.6.16/
mkdir build
cd build
mkdir /etc/unbound
/usr/local/sbin/unbound-anchor -a /etc/unbound/root.key
../configure --prefix=/usr/local
make -j4 
make -j4 install

安装java ^java

https://repo.huaweicloud.com/java/jdk/8u202-b08/
mkdir -p /usr/local/lib/jvm
tar -zxvf /opt/jdk-8u202-linux-x64.tar.gz -C /usr/local/lib/jvm
java -version
ln -sf /usr/local/lib/jvm/jdk1.8.0_202/include/linux/jni_md.h /usr/local/lib/jvm/jdk1.8.0_202/include/jni_md.h
ln -sf /usr/local/lib/jvm/jdk1.8.0_202/include/linux/jawt_md.h /usr/local/lib/jvm/jdk1.8.0_202/include/jawt_md.h

编译安装libenvent ^libenvent

https://github.com/libevent/libevent/releases/download/release-2.1.8-stable/libevent-2.1.8-stable.tar.gz
tar -zxvf /opt/libevent-2.1.8-stable.tar.gz -C /usr/local/src
cd /usr/local/src/libevent-2.1.8-stable

./configure --prefix=/usr/local
make -j4
make -j4 install

编译安装mongo-c-driver ^mongo-c-driver

https://github.com/mongodb/mongo-c-driver/releases/tag/1.29.1
tar -zxvf /opt/mongo-c-driver-1.29.1.tar.gz -C /usr/local/src
cd /usr/local/src/mongo-c-driver-1.29.1/
mkdir cmake-build
cd cmake-build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr/local/ -D OPENSSL_ROOT_DIR=/usr/local
make -j4
make -j4 install
mv -vf /usr/local/include/libbson-1.0/* /usr/local/include

编译安装 libxml2 ^libxml2

http://xmlsoft.org/sources/libxml2-2.9.7.tar.gz
tar -zxvf /opt/libxml2-2.9.7.tar.gz -C /usr/local/src
cd /usr/local/src/libxml2-2.9.7
mkdir build
cd build
../configure --prefix=/usr/local
make -j4
make -j4 install

编译安装 judy ^judy

https://jaist.dl.sourceforge.net/project/judy/judy/Judy-1.0.5/Judy-1.0.5.tar.gz?viasf=1
tar -zxvf /opt/Judy-1.0.5.tar.gz -C /usr/local/src
cd /usr/local/src/judy-1.0.5
./configure --prefix=/usr/local
# make 报错再执行一次make即可
make -j4 && make install

编译安装 lz4 ^lz4

https://github.com/lz4/lz4/releases
tar -zxvf /opt/lz4-1.10.0.tar.gz -C /usr/local/src
cd /usr/local/src/lz4-1.10.0/build/cmake/
mkdir cmake-build
cd cmake-build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr/local
make -j4 && make -j4 install

编译安装 xz ^xz

https://jaist.dl.sourceforge.net/project/lzmautils/xz-5.2.4.tar.gz?viasf=1
tar -zxvf /opt/xz-5.2.4.tar.gz -C /usr/local/src
cd /usr/local/src/xz-5.2.4/
mkdir build
cd build
../configure --prefix=/usr/local --enable-shared
make -j4
make -j4 install

编译安装 lzo ^lzo

http://www.oberhumer.com/opensource/lzo/download/lzo-2.08.tar.gz
tar -zxvf /opt/lzo-2.08.tar.gz -C /usr/local/src
cd /usr/local/src/lzo-2.08
mkdir build
cd build
../configure --prefix=/usr/local --enable-shared
make -j4 && make -j4 install

编译安装 krb5 ^krb5

https://kerberos.org/dist/krb5/1.18/krb5-1.18.2.tar.gz
tar -zxvf /opt/krb5-1.18.2.tar.gz -C /usr/local/src
cd /usr/local/src/krb5-1.18.2/src
mkdir build
cd build
../configure --prefix=/usr/local
make -j4
make -j4 install

编译安装 gssapi ^gssapi

[[[#^krb5|依赖 krb5]]]
依赖 krb5

https://files.pythonhosted.org/packages/f7/17/1a316f0c6a1b802a9b4d6253068b4a3756cfef19fbd43d9747839d98ff30/gssapi-1.5.1.tar.gz
tar -zxvf /opt/gssapi-1.5.1.tar.gz -C /usr/local/src
cd /usr/local/src/gssapi-1.5.1

python3 -m venv /usr/local/opt/venv_37_centos7
source /usr/local/opt/venv_37_centos7/bin/activate

pip3 install --upgrade pip -i https://pypi.tuna.tsinghua.edu.cn/simple
pip3 install --upgrade setuptools -i https://pypi.tuna.tsinghua.edu.cn/simple

pip3 install .
deactivate

编译安装 swig ^swig

https://jaist.dl.sourceforge.net/project/swig/swig/swig-4.3.0/swig-4.3.0.tar.gz?viasf=1
tar -zxvf /opt/swig-4.3.0.tar.gz -C /usr/local/src
cd /usr/local/src/swig-4.3.0
mkdir build
cd build
../configure --prefix=/usr/local --with-pcre2-prefix=/usr/local
make -j4
make -j4 install

编译安装 kytea ^kytea

[[[#^autoconf|依赖 autoconf]]]
依赖 autoconf

https://codeload.github.com/neubig/kytea/zip/refs/heads/master
unzip /opt/kytea-master.zip -d /usr/local/src
cd /usr/local/src/kytea-master
mkdir m4
autoreconf -vifs
mkdir build
cd build
../configure --prefix=/usr/local
make -j4
make -j4 install

编译安装 kytea-python ^kytea-python

[[[#^swig|依赖 swig]]]
依赖 swig

https://files.pythonhosted.org/packages/bd/92/3a987ebc15180fdc8f69bf774ea9007e8f063949b229a432524e5aeed019/kytea-0.1.9.tar.gz
tar -zxvf /opt/kytea-0.1.9.tar.gz -C /usr/local/src
cd /usr/local/src/kytea-0.1.9

python3 -m venv /usr/local/opt/venv_37_centos7
source /usr/local/opt/venv_37_centos7/bin/activate

pip3 install --upgrade pip -i https://pypi.tuna.tsinghua.edu.cn/simple
pip3 install --upgrade setuptools -i https://pypi.tuna.tsinghua.edu.cn/simple

swig -c++ -python -I/usr/local/include /usr/local/src/kytea-0.1.9/lib/kytea/mykytea.i

pip3 install .
deactivate

编译安装 snappy ^snappy

https://codeload.github.com/google/snappy/tar.gz/refs/tags/1.1.8
tar -zxvf /opt/snappy-1.1.8.tar.gz -C /usr/local/src
cd /usr/local/src/snappy-1.1.8/
mkdir cmake-build
cd cmake-build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr/local -DBUILD_SHARED_LIBS=1
gmake -j4
gmake -j4 install

编译安装 pyopenssl ^pyopenssl

source /usr/local/opt/venv_37_centos7/bin/activate
pip3 install --upgrade pip -i https://pypi.tuna.tsinghua.edu.cn/simple
pip3 install pyopenssl msgpack-python
deactivate

编译安装 unixODBC ^unixODBC

https://www.unixodbc.org/unixODBC-2.3.7.tar.gz
tar -zxvf /opt/unixODBC-2.3.7.tar.gz -C /usr/local/src
cd /usr/local/src/unixODBC-2.3.7
mkdir build
cd build
../configure --prefix=/usr/local
make -j4
make -j4 install

编译安装 zeromq ^zeromq

https://github.com/zeromq/libzmq/releases/tag/v4.3.5
tar -zxvf /opt/zeromq-4.3.5.tar.gz -C /usr/local/src
cd /usr/local/src/zeromq-4.3.5
mkdir build
cd build
../configure --prefix=/usr/local
make -j4
make -j4 install

编译安装 readline ^readline

ftp://ftp.gnu.org/gnu/readline/
tar -zxvf /opt/readline-6.2.tar.gz -C /usr/local/src
cd /usr/local/src/readline-6.2
mkdir build
cd build
../configure --prefix=/usr/local --enable-shared --with-curses
# 该选项强制 Readline 链接该`libncurses`库
make -j4 SHLIB_LIBS="-lncurses"
make -j4 SHLIB_LIBS="-lncurses" install
rm -rf /usr/local/lib/libreadline.*.old

编译MariaDB-server ^MariaDB-server

[[[#^fmt|依赖 fmt]]] | [[[#^openssl|依赖 openssl]]] | [[[#^boost|依赖 boost]]] | [[[#^ncurses|依赖 ncurses]]] | [[[#^curl|依赖 curl]]] | [[[#^zstd|依赖 zstd]]] | [[[#^gnutls|依赖 gnutls]]] | [[[#^pcre2|依赖 pcre2]]] | [[[#^bzip2|依赖 bzip2]]] | [[[#^nettle|依赖 nettle]]] | | [[[#^libenvent|依赖 libenvent]]] | [[[#^pam|依赖 pam]]] | [[[#^java|依赖 java]]] | [[[#^zlib|依赖 zlib]]] | [[[#^mongo-c-driver|依赖 mongo-c-driver]]] | [[[#^libxml2|依赖 libxml2]]] | [[[#^judy|依赖 judy]]] | [[[#^lz4|依赖 lz4]]] | [[[#^xz|依赖 xz]]] | [[[#^lzo|依赖 lzo]]] | [[[#^snappy|依赖 snappy]]] | [[[#^pyopenssl|依赖 pyopenssl]]] | [[[#^unixODBC|依赖 unixODBC]]] | [[[#^kytea|依赖 kytea]]] | [[[#^zeromq|依赖 zeromq]]] | [[[#^readline|依赖 readline]]]

依赖 fmt | 依赖 openssl | 依赖 boost | 依赖 ncurses | 依赖 curl | 依赖 zstd | 依赖 gnutls|依赖 pcre2 | 依赖 bzip2 | 依赖 nettle | 依赖 libenvent | 依赖 pam | 依赖 java | 依赖 zlib|依赖 mongo-c-driver | 依赖 libxml2 | 依赖 judy | 依赖 lz4 | 依赖 xz | 依赖 lzo | 依赖 snappy|依赖 pyopenssl | 依赖 unixODBC | 依赖 kytea | 依赖 zeromq | 依赖 readline

https://mirrors.tuna.tsinghua.edu.cn/mariadb///mariadb-11.4.4/source/mariadb-11.4.4.tar.gz
tar -zxvf /opt/mariadb-11.4.4.tar.gz -C /usr/local/src
cd /usr/local/src/mariadb-11.4.4
mkdir cmake-build
cd cmake-build

declare -x PKG_CONFIG_PATH="/usr/local/pcre2-10.32/pcre2/lib/pkgconfig:/usr/local/kytea-master/kytea/lib/pkgconfig:/usr/local/zeromq-4.3.5/zeromq/lib/pkgconfig:$PKG_CONFIG_PATH"

\cp /usr/local/snappy-1.1.8/snappy/include/* /usr/local/mariadb-11.4.4/storage/rocksdb/rocksdb/util/
\cp /usr/local/lz4-1.10.0/lz4/include/* /usr/local/mariadb-11.4.4/storage/rocksdb/rocksdb/util/
\cp /usr/local/zstd-1.4.1/zstd/include/* /usr/local/mariadb-11.4.4/storage/rocksdb/rocksdb/util/

# 注释掉bcon.h，根据bson.h的使用规范只有bson/bson.h能被直接引用
vi /usr/local/src/mariadb-11.4.4/storage/connect/cmgoconn.h
      8 #include <bson/bson.h>
      9 /*#include <bson/bcon.h>*/
     10 #include <mongoc.h>
     11 

 ln -sf /usr/local/include/libxml2/libxml /usr/local/include/libxml

# 改成下面的样子避免类型错误
    913                                 value->SetValue(static_cast<long long>(bson_iter_int32(&Desc)));
    916                                 value->SetValue(static_cast<long long>(bson_iter_int64(&Desc)));
    919                                 value->SetValue(static_cast<long long>(bson_iter_double(&Desc)));
    922                                 value->SetValue(static_cast<long long>(bson_iter_date_time(&Desc) / 1000));


cmake .. \
-DLIBFMT_INCLUDE_DIR=/usr/local/include \
-DCMAKE_INSTALL_PREFIX=/usr/local \
-DMYSQL_DATADIR=/var/lib/mysql \
-DSYSCONFDIR=/usr/local/etc \
-DWITHOUT_TOKUDB=1 \
-DMYSQL_UNIX_ADDR=/var/lib/mysql/mysql.sock \
-DDEFAULT_CHARSET=utf8 \
-DDEFAULT_COLLATION=utf8_general_ci \
-DBoost_INCLUDE_DIR=/usr/local/include \
-DCURSES_CURSES_LIBRARY=/usr/local/lib/libncurses.so \
-DCURSES_INCLUDE_PATH=/usr/local/include/ncurses \
-DCURL_INCLUDE_DIR=/usr/local/include \
-DCURL_LIBRARY=/usr/local/lib/libcurl.so \
-DZSTD_INCLUDE_DIRS=/usr/local/include \
-DZSTD_LIBRARIES=/usr/local/lib64/libzstd.so \
-DGNUTLS_INCLUDE_DIR=/usr/local/include \
-DGNUTLS_LIBRARY=/usr/local/lib/libgnutls.so \
-DBZIP2_INCLUDE_DIR=/usr/local/include \
-DBZIP2_LIBRARIES=/usr/local/lib/libbz2.so.1.0 \
-DNETTLE_LIBRARY=/usr/local/lib64 \
-DNETTLE_INCLUDE_DIR=/usr/local/include \
-DHOGWEED_LIBRARY=/usr/local/lib64/ \
-DBoost_DIR=/usr/local \
-DEVENT_LIBRARY=/usr/local/lib/libevent.so \
-DJAVA_AWT_INCLUDE_PATH=/usr/local/lib/jvm/jdk1.8.0_202/include \
-DJAVA_AWT_LIBRARY=/usr/local/lib/jvm/jdk1.8.0_202/jre/lib/amd64/libawt.so \
-DJAVA_INCLUDE_PATH=/usr/local/lib/jvm/jdk1.8.0_202/include \
-DJAVA_JVM_LIBRARY=/usr/local/lib/jvm/jdk1.8.0_202/jre/lib/amd64/server/libjvm.so \
-DJava_JAR_EXECUTABLE=/usr/local/lib/jvm/jdk1.8.0_202/bin/jar \
-DJava_IDLJ_EXECUTABLE=/usr/local/lib/jvm/jdk1.8.0_202/bin/idlj \
-DJava_JARSIGNER_EXECUTABLE=/usr/local/lib/jvm/jdk1.8.0_202/bin/jarsigner \
-DJava_JAVAC_EXECUTABLE=/usr/local/lib/jvm/jdk1.8.0_202/bin/javac \
-DJava_JAVADOC_EXECUTABLE=/usr/local/lib/jvm/jdk1.8.0_202/bin/javadoc \
-DJava_JAVAH_EXECUTABLE=/usr/local/lib/jvm/jdk1.8.0_202/bin/javah \
-DJava_JAVA_EXECUTABLE=/usr/local/lib/jvm/jdk1.8.0_202/bin/java  \
-DOPENSSL_INCLUDE_DIR=/usr/local/include \
-DOPENSSL_CRYPTO_LIBRARY=/usr/local/lib64/libcrypto.so \
-DOPENSSL_SSL_LIBRARY=/usr/local/lib64/libssl.so \
-DPAM_LIBRARY=/usr/local/lib/libpam.so \
-DZLIB_INCLUDE_DIR=/usr/local/include \
-DZLIB_LIBRARY_RELEASE=/usr/local/lib/libz.so \
-Dlibmongoc-1.0_DIR=/usr/local/lib64 \
-DLIBXML2_INCLUDE_DIR=/usr/local/include/libxml2 \
-DLIBXML2_LIBRARY=/usr/local/lib/libxml2.so \
-DJudy_INCLUDE_DIRS=/usr/local/include \
-DKRB5_CONFIG=/usr/local/bin/krb5-config \
-DJudy_LIBRARIES=/usr/local/lib/libJudy.so \
-DLZ4_INCLUDE_DIRS=/usr/local/include \
-DLZ4_LIBRARIES=/usr/local/lib64/liblz4.so \
-DLIBLZMA_INCLUDE_DIR=/usr/local/include \
-DLIBLZMA_LIBRARY_RELEASE=/usr/local/lib/liblzma.so \
-DLZO_INCLUDE_DIRS=/usr/local/include \
-DLZO_LIBRARIES=/usr/local/lib/liblzo2.so \
-DSNAPPY_INCLUDE_DIRS=/usr/local/include \
-DSNAPPY_LIBRARIES=/usr/local/lib64/libsnappy.so \
-DODBC_INCLUDES=/usr/local/include \
-DODBC_LIBRARY=/usr/local/lib/libodbc.so \
-DPCRE_libpcre2-8_INCLUDEDIR=/usr/local/include \
-DPCRE_libpcre2-8_LIBDIR=/usr/local/lib \
-DREADLINE_INCLUDE_DIR=/usr/local/include \
-DREADLINE_LIBRARY=/usr/local/lib/libreadline.so

\cp /opt/fmt-11.0.2.zip /usr/local/src/mariadb-11.4.4/cmake-build/extra/libfmt/src/fmt-11.0.2.zip
# 删掉 /usr/local/mariadb-11.4.4/plugin/auth_pam/mapper/pam_user_map.c 56行的 static
gmake -j4 && gmake install

配置 mariadb 系统服务 ^mariadb-service

  1. 创建mysql用户组和用户：
groupadd -r mysql
useradd -g mysql -r -s /sbin/nologin mysql -d /usr/lib/mysql
# 归其为mysql用户
mkdir -p /var/lib/mysql
chown mysql:mysql /var/lib/mysql
chmod 755 /var/lib/mysql
  1. 更改 libexec 权限
chmod +x /usr/libexec/mysql*
mkdir -p /var/log/mariadb
chmod +x /usr/local/bin/mysql_install_db
chmod +x /usr/local/bin/mariadb-install-db
systemctl daemon-reload

pgsql-server编译安装

编译安装 libxslt ^libxslt

https://codeload.github.com/GNOME/libxslt/tar.gz/refs/tags/v1.1.32
tar -zxvf /opt/libxslt-1.1.32.tar.gz -C /usr/local/src
cd /usr/local/src/libxslt-1.1.32
mkdir m4
export ACLOCAL_PATH="/usr/local/share/aclocal"
autoreconf -vifs
mkdir build
cd build
../configure --prefix=/usr/local --enable-shared
make -j4
make -j4 install

编译安装pgsql ^pgsql

[[[#^perl|依赖 perl]]] | [[[#^python37|依赖 python37]]] | [[[#^readline|依赖 readline]]]
依赖 perl | 依赖 python37 | 依赖 readline

https://ftp.postgresql.org/pub/source/v16.2/postgresql-16.2.tar.gz
tar -zxvf /opt/postgresql-16.2.tar.gz -C /usr/local/src
cd /usr/local/src/postgresql-16.2
mkdir build
cd build

../configure \
--prefix=/usr/local/ \
--with-pgport=5432 \
--with-segsize=16 \
--with-blocksize=32 \
--with-wal-blocksize=64 \
--with-libedit-preferred \
--with-perl \
--with-openssl \
--with-libxml \
--with-python \
--with-libxslt \
--enable-thread-safety \
--enable-nls=en_US.UTF-8 \
--without-icu \
--with-libraries=/usr/local/lib/ \
--with-includes=/usr/local/include/ \
--libdir=/usr/local/lib \
--with-zstd \
--with-lz4 \
--with-libxml \
--with-ldap \
--with-pam \
--with-gssapi \
--with-perl
make -j4 && make install

export PGDATA=/usr/local/postgresql-16.2/postgresql/data/postgresql

编译安装timescale ^timescale

https://codeload.github.com/timescale/timescaledb/tar.gz/refs/tags/2.13.1
tar -zxvf /opt/timescaledb-2.13.1.tar.gz -C /usr/local/src
cd /usr/local/src/timescaledb-2.13.1
mkdir build
cd build
echo y | ../bootstrap
cd ./build && make -j4
make -j4 install

配置与启动 pgsql ^conf-pgsql

  1. 创建mysql用户组和用户：
groupadd -r postgres
useradd -g postgres -r -s /bin/bash postgres -d /var/lib/pgsql
echo 123.com | passwd --stdin postgres
# 归其为mysql用户
mkdir -p /var/lib/pgsql
chown postgres:postgres /var/lib/pgsql
chmod 755 /var/lib/pgsql
chmod +x /usr/libexec/postgresql-check-db-dir
chmod +x /usr/local/bin/postgresql-setup
chmod +x  /usr/local/share/postgresql-setup/library.sh
/usr/local/bin/postgresql-16-setup initdb
timescaledb-tune --pg-config=/usr/local/bin/pg_config -yes
timescaledb-tune --pg-config=/usr/local/bin/pg_config -conf-path=/var/lib/pgsql/data/postgresql.conf -yes

systemctl start postgresql
systemctl status postgresql

[root@localhost ~]# cat /var/lib/pgsql/.bashrc 
export LD_LIBRARY_PATH="/usr/local/src/perl5-5.26.3:/usr/local/lib:/usr/local/lib64"
declare -x JAVA_HOME=/usr/local/lib/jvm/jdk1.8.0_202
declare -x JRE_HOME=${JAVA_HOME}/jre  
declare -x CLASSPATH=.:${JAVA_HOME}/lib:${JRE_HOME}/lib
declare -x JAVA_PATH=${JAVA_HOME}/bin:${JRE_HOME}/bin
export PATH="${JAVA_PATH}:/usr/local/opt/venv_37_centos7/bin:/usr/local/opt/go/bin:/usr/local/opt/glibc/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin"
[root@localhost ~]# 
sudo -u postgres bash -c '. /var/lib/pgsql/.bashrc; /usr/local/bin/psql -c "grant all on database \"zabbix\" to zabbix;"'

centos7 构建zabbix7.0 rpm 安装包

编译安装net-snmp ^net-snmp

[[[#^perl|依赖 perl]]]
依赖 perl

https://codeload.github.com/net-snmp/net-snmp/tar.gz/refs/tags/v5.8
tar -zxvf /opt/net-snmp-5.8.tar.gz -C /usr/local/src
cd /usr/local/src/net-snmp-5.8
mkdir build
./configure --prefix=/usr/local --enable-embedded-perl --enable-shared --with-perl-modules --with-openssl=/usr/local
# 一路回车
make -j4
make -j4 install

编译安装 popt ^popt

  1. 下载安装包
https://ftp.osuosl.org/pub/rpm/popt/releases/popt-1.x/popt-1.18.tar.gz
tar -zxvf /opt/popt-1.18.tar.gz -C /usr/local/src
cd /usr/local/src/popt-1.18
mkdir build
cd build/
../configure --prefix=/usr/local --enable-shared
make -j4
make -j4 install

编译安装OpenIPMI ^OpenIPMI

[[[#^popt|依赖 popt]]] | [[[#^net-snmp|依赖 net-snmp]]] | [[[#^openssl|依赖 openssl]]] | [[[#^readline|依赖 readline]]]
依赖 popt | 依赖 net-snmp | 依赖 openssl | 依赖 readline

https://jaist.dl.sourceforge.net/project/openipmi/OpenIPMI%202.0%20Library/OpenIPMI-2.0.31.tar.gz?viasf=1
tar -zxvf /opt/OpenIPMI-2.0.36.tar.gz -C /usr/local/src
cd /usr/local/src/OpenIPMI-2.0.36
mkdir build
cd build/
../configure --prefix=/usr/local --enable-shared --with-openssl=/usr/local --with-snmplibs="-L/usr/local -lnetsnmp"
make -j4
make -j4 install

安装fping ^fping

https://github.com/schweikert/fping/releases/tag/v5.2
tar -zxvf /opt/fping-5.2.tar.gz -C /usr/local/src
cd /usr/local/src/fping-5.2
mkdir build
cd build/
../configure --prefix=/usr/local
make -j4
make -j4 install

安装go ^go

https://golang.google.cn/dl/
# cat go1.22.4.linux-amd64.tar.gz_0* > go1.22.4.linux-amd64.tar.gz
tar -zxvf go1.22.4.linux-amd64.tar.gz -C /usr/local/opt
go env -w GO111MODULE=on && \
go env -w GOPROXY=https://goproxy.cn,direct && \
go env -w GOBIN=/usr/local/opt/go/bin

编译 libmagic ^libmagic

https://codeload.github.com/file/file/tar.gz/refs/tags/FILE5_33
tar -zxvf /opt/file-FILE5_33.tar.gz -C /usr/local/src
cd /usr/local/src/file-FILE5_33
autoreconf -vifs
mkdir build
cd build
../configure --prefix=/usr/local --enable-shared
make -j4 
make -j4 install

编译 libarchive ^libarchive

https://github.com/libarchive/libarchive/releases?page=2
tar -zxvf /opt/libarchive-3.3.3.tar.gz -C /usr/local/src
cd /usr/local/src/libarchive-3.3.3
mkdir build
cd build
../configure --prefix=/usr/local --enable-shared
make -j4 
make -j4 install

编译 lua ^lua

这个无需安装

https://www.lua.org/ftp/lua-5.3.4.tar.gz
tar -zxvf /opt/lua-5.3.4.tar.gz -C /usr/local/src
cd /usr/local/src/lua-5.3.4
sed -i -e "/^\TO_LIB/s/=.*/= liblua.a liblua.so/" /usr/local/src/lua-5.3.4/Makefile
sed -i -e "/^\CFLAGS/s/=.*/= -O2 -Wall -Wextra -DLUA_COMPAT_5_2 \$(SYSCFLAGS) \$(MYCFLAGS) -fPIC/"  /usr/local/src/lua-5.3.4/src/Makefile
sed -i -e "/^LUA_SO/d" /usr/local/src/lua-5.3.4/src/Makefile
sed -i -e "/^LUA_A/a\LUA_SO= liblua.so" /usr/local/src/lua-5.3.4/src/Makefile
sed -i -e "/^\ALL_T/s/=.*/= \$(LUA_A) \$(LUA_T) \$(LUAC_T) \$(LUA_SO)/"  /usr/local/src/lua-5.3.4/src/Makefile
sed -i -e "/^\$(LUA_T)/i\$(LUA_SO): \$(CORE_O) \$(LIB_O)\n\t\$(CC) -o \$@ -shared \$? -ldl -lm" /usr/local/src/lua-5.3.4/src/Makefile
make -j4 linux
make -j4 linux install

cat > /usr/local/lib/pkgconfig/lua.pc << EOF
prefix=/usr/local
exec_prefix=\${prefix}
libdir=\${exec_prefix}/lib
sharedlibdir=\${libdir}
includedir=\${prefix}/include

Name: lua
Description: lua
Version: 5.3.4

Requires:
Libs: -L\${libdir} -L\${sharedlibdir} -lz
Cflags: -I\${includedir}
EOF

chmod +x /usr/local/lib/liblua.so

编译 libelf ^libelf

https://sourceware.org/elfutils/ftp/0.190/elfutils-0.190.tar.bz2
tar -jxvf /opt/elfutils-0.190.tar.bz2 -C /usr/local/src
cd /usr/local/src/elfutils-0.190
cd build
../configure --prefix=/usr/local --disable-debuginfod --enable-install-elfh --enable-libdebuginfod=dummy
make -j4 
make -j4 -C libelf install
install -vm644 config/libelf.pc /usr/local/lib/pkgconfig/libelf.pc

编译 rpm ^rpm

[[[#^openssl|依赖 openssl]]] | [[[#^libmagic|依赖 libmagic]]] | [[[#^libarchive|依赖 libarchive]]] | [[[#^libelf|依赖 libelf]]]
依赖 openssl | 依赖 libmagic | 依赖 libarchive | 依赖 libelf

https://ftp.osuosl.org/pub/rpm/releases/rpm-4.14.x/rpm-4.14.3.tar.bz2
tar -jxvf /opt/rpm-4.14.3.tar.bz2 -C /usr/local/src
cd /usr/local/src/rpm-4.14.3
sh autogen.sh --prefix=/usr/local --enable-shared --with-crypto=openssl --without-lua
make -j4 
make -j4 install

生成rpm ^make-rpm

[[[#^net-snmp|依赖 net-snmp]]] | [[[#^OpenIPMI|依赖 OpenIPMI]]] | [[[#^fping|依赖 fping]]] | [[[#^go|依赖 go]]] | [[[#^rpm|依赖 rpm]]]
依赖 net-snmp | 依赖 OpenIPMI | 依赖 fping | 依赖 go | 依赖 rpm

https://cdn.zabbix.com/zabbix/sources/stable/7.0/zabbix-7.0.6.tar.gz

# 因非yum或rpm安装，所以需要注释掉校验
     97 # BuildRequires:        make
    114 # %if 0%{?rhel} >= 7 || %{amzn} >= 2023
    115 # BuildRequires:        pcre2-devel
    116 # %else
    117 # BuildRequires:        pcre-devel
    118 # %endif
    119 # %if 0%{?rhel} >= 6 || %{amzn} >= 2023
    120 # BuildRequires:        openssl-devel >= 1.0.1
    121 # %endif
    122 # %if 0%{?rhel} >= 7 || %{amzn} >= 2023
    123 # BuildRequires:        systemd
    124 # %endif
    125 # %if 0%{?build_selinux_policy}
    126 # BuildRequires: policycoreutils-devel
    127 # %if 0%{rhel} >= 9 || %{amzn} >= 2023
    128 # BuildRequires: selinux-policy-devel
    129 # %endif
    130 # %endif
	997 # %{_datadir}/zabbix-sql-scripts/sqlite3/proxy.sql


%{!?build_with_mysql: %global build_with_mysql 0}
%{!?build_with_pgsql: %global build_with_pgsql 1}
%{!?build_with_sqlite: %global build_with_sqlite 0}

        --with-ssh2=/usr/local/libssh2-1.11.1/libssh2
        --with-postgresql=/usr/local/postgresql-16.2/postgresql/bin/pg_config
        --with-net-snmp=/usr/local/net-snmp-5.8/net-snmp/bin/net-snmp-config
        --with-openipmi=/usr/local/OpenIPMI-2.0.36/OpenIPMI
        --with-ldap=/usr/local/openldap-2.4.46/openldap
        --with-libevent=/usr/local/libevent-2.1.8-stable/libevent
        --with-libevent-include=/usr/local/libevent-2.1.8-stable/libevent/include
        --with-libevent-lib=/usr/local/libevent-2.1.8-stable/libevent/lib
        --with-openssl=/usr/local/openssl-1.1.1w

https://repo.zabbix.com/zabbix/7.0/rhel/7/SRPMS/
 rpm -ivhU --force --nodeps /opt/zabbix-7.0.7-release1.el7.src.rpm
 
cd /root/rpmbuild/SPECS/ &&
rpmbuild \
--define "rhel 7" \
--define "_bindir /usr/bin" \
--define "_datadir /usr/share" \
--define "_docdir /usr/share/doc" \
--define "_localstatedir /var" \
--define "_mandir /usr/share/man" \
--define "_sbindir /usr/sbin" \
--define "_sysconfdir /etc" \
--define "zabbix_script_dir /usr/bin" \
--define "_tmpfilesdir /usr/lib/tmpfiles.d" \
--define "_unitdir /usr/lib/systemd/system" \
--define "zabbix_script_dir /usr/bin" \
--define "build_selinux_policy 1" \
--define "build_agent 1" \
--define "build_agent2 1" \
--define "build_web_service 1" \
--define "build_server 1" \
--define "build_proxy 1" \
--define "build_frontend 1" \
--define "build_java_gateway 1" \
--define "build_with_mysql 1" \
--define "build_with_pgsql 1" \
--define "build_with_sqlite 0" \
-bb zabbix.spec

centos7 编译安装 zabbix 7.0

编译安装nginx ^nginx

  1. 创建 nginx 用户组和用户：
groupadd -r nginx
useradd -g nginx -r -s /sbin/nologin nginx -d /usr/share/zabbix
  1. 编译安装nginx
https://nginx.org/download/nginx-1.24.0.tar.gz
tar -zxvf /opt/nginx-1.24.0.tar.gz -C /usr/local/src
cd /usr/local/src/nginx-1.24.0
./configure --prefix=/usr/local --user=nginx --group=nginx --error-log-path=/var/log/nginx/nginx.log --http-log-path=/var/log/nginx/access.log --conf-path=/etc/nginx/nginx.conf --pid-path=/var/run/nginx.pid --with-http_stub_status_module --with-http_ssl_module --with-http_gzip_static_module
make -j4 
make -j4 install
systemctl daemon-reload
systemctl start nginx
systemctl status nginx

编译 libpng ^libpng

https://jaist.dl.sourceforge.net/project/libpng/libpng16/1.6.44/libpng-1.6.44.tar.gz?viasf=1
tar -zxvf /opt/libpng-1.6.44.tar.gz -C /usr/local/src
cd /usr/local/src/libpng-1.6.44
mkdir build
cd build
../configure --prefix=/usr/local
make -j4 
make -j4 install

编译 libjpeg ^libjpeg

http://www.ijg.org/files/jpegsrc.v9f.tar.gz
tar -zxvf /opt/jpegsrc.v9f.tar.gz -C /usr/local/src
cd /usr/local/src/jpeg-9f
mkdir build
cd build
../configure --prefix=/usr/local
make -j4 
make -j4 install

编译 freetype ^freetype

https://download.savannah.gnu.org/releases/freetype/freetype-2.9.tar.bz2
tar -zxvf /opt/freetype-2.9.1.tar.gz -C /usr/local/src
cd /usr/local/src/freetype-2.9.1
mkdir build
cd build
../configure --prefix=/usr/local
make -j4 
make -j4 install

编译 oniguruma ^oniguruma

https://github.com/kkos/oniguruma/releases
tar -zxvf /opt/onig-6.9.10.tar.gz -C /usr/local/src
cd /usr/local/src/onig-6.9.10
mkdir build
cd build
../configure --prefix=/usr/local
make -j4 
make -j4 install

编译安装 php ^php

[[[#^libpng|依赖 libpng]]] | [[[#^libjpeg|依赖 libjpeg]]] | [[[#^freetype|依赖 freetype]]] | [[[#^oniguruma|依赖 oniguruma]]]
依赖 libpng | 依赖 libjpeg | 依赖 freetype | 依赖 oniguruma

  1. 创建 nginx 用户组和用户：
groupadd -r nginx
useradd -g nginx -r -s /sbin/nologin nginx -d /usr/share/zabbix
  1. 编译安装php
https://www.php.net/distributions/php-8.3.3.tar.gz
tar -zxvf /opt/php-8.3.3.tar.gz -C /usr/local/src
cd /usr/local/src/php-8.3.3
cd build
../configure --prefix=/usr/local --with-config-file-path=/etc --with-pdo-mysql=/usr/local --with-mysql-sock=/var/lib/mysql/mysql.sock --with-pgsql=/usr/local/bin --with-pdo-pgsql=/usr/local --enable-gd --enable-bcmath --with-jpeg --with-freetype --enable-ctype --enable-xml --enable-session --enable-sockets --enable-mbstring=shared --with-gettext --with-ldap --with-openssl --without-pdo-sqlite --without-sqlite3 --enable-fpm --with-iconv=/usr/local/bin -with-fpm-acl --with-fpm-user=nginx --with-fpm-group=nginx --with-curl --with-mysqli
make -j4 
make -j4 install
mkdir -p /var/log/loki
chmod 777 -R /var/log/loki
chown nginx:nginx /var/log/loki/zabbix_php-fpm_slow.log
touch /usr/local/var/log/php-fpm.log
chown nginx:nginx /usr/local/var/log/php-fpm.log
/usr/local/bin/php -r 'phpinfo();' | grep 'php.ini'
\cp /usr/local/src/php-8.3.3/php.ini-production /etc/php.ini
	# 修改/etc/php.ini配置文件
    920 extension=/usr/local/lib/php/extensions/no-debug-non-zts-20230831/mbstring.so
systemctl daemon-reload
systemctl start php-fpm
systemctl status php-fpm

安装 zabbix 7.0 - mysql 版 ^zabbix-70-mysql

libtool --finish /usr/local/lib
libtool --finish /usr/local/lib64
libtool --finish /usr/local/opt/glibc/lib
declare -x ACLOCAL_PATH="/usr/local/share/aclocal/"
declare -x LD_LIBRARY_PATH="/usr/local/src/perl5-5.26.3:/usr/local/lib:/usr/local/lib64"
declare -x JAVA_HOME=/usr/local/lib/jvm/jdk1.8.0_202
declare -x JRE_HOME=${JAVA_HOME}/jre  
declare -x CLASSPATH=.:${JAVA_HOME}/lib:${JRE_HOME}/lib
declare -x JAVA_PATH=${JAVA_HOME}/bin:${JRE_HOME}/bin
declare -x PATH="${JAVA_PATH}:/usr/local/opt/venv_37_centos7/bin:/usr/local/opt/go/bin:/usr/local/opt/glibc/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin"
declare -x PKG_CONFIG_PATH="/usr/local/lib/pkgconfig:/usr/local/lib64/pkgconfig"
# 如果想启用yum打开下面的LD_PRELOAD变量，关闭使用unset LD_PRELOAD
# export LD_PRELOAD="/usr/lib64/liblzma.so.5:/usr/local/lib64/libcrypto.so.1.1:/usr/local/lib64/libssl.so.1.1"

rpm -ivhU --force --nodeps zabbix-agent2-7.0.7-release1.x86_64.rpm zabbix-get-7.0.7-release1.x86_64.rpm zabbix-java-gateway-7.0.7-release1.x86_64.rpm zabbix-js-7.0.7-release1.x86_64.rpm zabbix-sender-7.0.7-release1.x86_64.rpm zabbix-server-mysql-7.0.7-release1.x86_64.rpm zabbix-web-service-7.0.7-release1.x86_64.rpm

rpm -ivhU --force --nodeps zabbix-nginx-conf-7.0.7-release1.noarch.rpm zabbix-sql-scripts-7.0.7-release1.noarch.rpm zabbix-web-7.0.7-release1.noarch.rpm zabbix-web-deps-7.0.7-release1.noarch.rpm zabbix-web-mysql-7.0.7-release1.noarch.rpm

注意

注意 ^zhuyi

  1. gcc重新编译要执行，如果更改了系统环境变量也需要执行
# make clean
# make distclean
find ./ -name config.cache | xargs rm -f
  1. 查看二进制文件 build ID 命令，编译 gcc 时需要添加 “–enable-linker-build-id”
eu-readelf -n /root/rpmbuild/BUILDROOT/zabbix-7.0.4-release1.el7.x86_64/usr/sbin/zabbix_agent2
eu-readelf -n /root/rpmbuild/BUILDROOT/zabbix-7.0.7-release1.el7.x86_64/usr/sbin/zabbix_web_service
  1. LD_LIBRARY_PATH、LIBRARY_PATH用于告知ld命令查找库位置
    多个位置用 : 隔开
declare -x LIBRARY_PATH="/usr/local/openssl-1.1.1w/openssl/lib:/usr/local/libssh2-1.11.1/libssh2/lib64:/usr/local/mpc-0.9/mpc/lib:/usr/local/gcc-8.5.0/gcc/lib64/:/usr/local/Linux-PAM-1.3.1/pam/lib:/usr/local/OpenIPMI-2.0.36/OpenIPMI/lib:/usr/local/openldap-2.4.46/openldap/lib:/usr/local/libevent-2.1.8-stable/libevent/lib/"

declare -x LD_LIBRARY_PATH="/usr/local/openssl-1.1.1w/openssl/lib:/usr/local/libssh2-1.11.1/libssh2/lib64:/usr/local/mpc-0.9/mpc/lib:/usr/local/gcc-8.5.0/gcc/lib64/:/usr/local/Linux-PAM-1.3.1/pam/lib:/usr/local/OpenIPMI-2.0.36/OpenIPMI/lib:/usr/local/openldap-2.4.46/openldap/lib:/usr/local/libevent-2.1.8-stable/libevent/lib/"
  1. 编译安装的make阶段报错Failed to build these modules:_ctypes
    尝试设置您的 PKG_CONFIG_PATH 变量以包含 libffi.pc 的安装路径，即declare -x PKG_CONFIG_PATH="/usr/local/libffi-3.4.4/libffi/lib/pkgconfig"
/usr/bin/install -c python-config.py /users/mskoenz/.pyenv/versions/3.7.0/lib/python3.7/config-3.7m-x86_64-linux-gnu/python-config.py
/usr/bin/install -c python-config /users/mskoenz/.pyenv/versions/3.7.0/bin/python3.7m-config
./python -E ./setup.py install \
   	--prefix=/users/mskoenz/.pyenv/versions/3.7.0 \
	--install-scripts=/users/mskoenz/.pyenv/versions/3.7.0/bin \
	--install-platlib=/users/mskoenz/.pyenv/versions/3.7.0/lib/python3.7/lib-dynload \
	--root=/
running install
running build
running build_ext
INFO: Could not locate ffi libs and/or headers

The following modules found by detect_modules() in setup.py, have been
built by the Makefile instead, as configured by the Setup files:
_abc                  atexit                pwd
time


Failed to build these modules:
_ctypes
  1. cmake OPENSSL_ROOT_DIR (missing: OPENSSL_CRYPTO_LIBRARY OPENSSL_INCLUDE_DIR)
# OPENSSL_ROOT_DIR (missing: OPENSSL_CRYPTO_LIBRARY OPENSSL_INCLUDE_DIR)
set(OPENSSL_ROOT_DIR "/usr/local/openssl-1.1.1w/openssl")
  1. cmake 编译安装可以通过grep查看确实的文件
[root@localhost build]# grep "NOTFOUND" CMakeCache.txt 
Boost_DIR:PATH=Boost_DIR-NOTFOUND
CHECKMODULE:FILEPATH=CHECKMODULE-NOTFOUND
CMAKE_DLLTOOL:FILEPATH=CMAKE_DLLTOOL-NOTFOUND
CURSES_CURSES_LIBRARY:FILEPATH=CURSES_CURSES_LIBRARY-NOTFOUND
CURSES_FORM_LIBRARY:FILEPATH=CURSES_FORM_LIBRARY-NOTFOUND
CURSES_NCURSES_LIBRARY:FILEPATH=CURSES_NCURSES_LIBRARY-NOTFOUND
DTRACE:FILEPATH=DTRACE-NOTFOUND
EVENT_LIBRARY:FILEPATH=EVENT_LIBRARY-NOTFOUND
GRN_MECAB_CONFIG_ABSOLUTE_PATH:FILEPATH=GRN_MECAB_CONFIG_ABSOLUTE_PATH-NOTFOUND
JAVA_AWT_INCLUDE_PATH:PATH=JAVA_AWT_INCLUDE_PATH-NOTFOUND
JAVA_AWT_LIBRARY:FILEPATH=JAVA_AWT_LIBRARY-NOTFOUND
JAVA_INCLUDE_PATH:PATH=JAVA_INCLUDE_PATH-NOTFOUND
JAVA_INCLUDE_PATH2:PATH=JAVA_INCLUDE_PATH2-NOTFOUND
JAVA_JVM_LIBRARY:FILEPATH=JAVA_JVM_LIBRARY-NOTFOUND
Java_IDLJ_EXECUTABLE:FILEPATH=Java_IDLJ_EXECUTABLE-NOTFOUND
Java_JARSIGNER_EXECUTABLE:FILEPATH=Java_JARSIGNER_EXECUTABLE-NOTFOUND
Java_JAR_EXECUTABLE:FILEPATH=Java_JAR_EXECUTABLE-NOTFOUND
Java_JAVAC_EXECUTABLE:FILEPATH=Java_JAVAC_EXECUTABLE-NOTFOUND
Java_JAVADOC_EXECUTABLE:FILEPATH=Java_JAVADOC_EXECUTABLE-NOTFOUND
Java_JAVAH_EXECUTABLE:FILEPATH=Java_JAVAH_EXECUTABLE-NOTFOUND
Java_JAVA_EXECUTABLE:FILEPATH=Java_JAVA_EXECUTABLE-NOTFOUND
Judy_INCLUDE_DIRS:PATH=Judy_INCLUDE_DIRS-NOTFOUND
Judy_LIBRARIES:FILEPATH=Judy_LIBRARIES-NOTFOUND
KRB5_CONFIG:FILEPATH=KRB5_CONFIG-NOTFOUND
LIBAIO_INCLUDE_DIRS:PATH=LIBAIO_INCLUDE_DIRS-NOTFOUND
LIBAIO_LIBRARIES:FILEPATH=LIBAIO_LIBRARIES-NOTFOUND
LIBEDIT_INCLUDE_DIR:PATH=LIBEDIT_INCLUDE_DIR-NOTFOUND
LIBEDIT_LIBRARY:FILEPATH=LIBEDIT_LIBRARY-NOTFOUND
LIBLZMA_INCLUDE_DIR:PATH=LIBLZMA_INCLUDE_DIR-NOTFOUND
LIBLZMA_LIBRARY_DEBUG:FILEPATH=LIBLZMA_LIBRARY_DEBUG-NOTFOUND
LIBLZMA_LIBRARY_RELEASE:FILEPATH=LIBLZMA_LIBRARY_RELEASE-NOTFOUND
LIBXML2_INCLUDE_DIR:PATH=LIBXML2_INCLUDE_DIR-NOTFOUND
LIBXML2_LIBRARY:FILEPATH=LIBXML2_LIBRARY-NOTFOUND
LZ4_INCLUDE_DIRS:PATH=LZ4_INCLUDE_DIRS-NOTFOUND
LZ4_LIBRARIES:FILEPATH=LZ4_LIBRARIES-NOTFOUND
LZO_INCLUDE_DIRS:PATH=LZO_INCLUDE_DIRS-NOTFOUND
LZO_LIBRARIES:FILEPATH=LZO_LIBRARIES-NOTFOUND
ODBC_INCLUDES:FILEPATH=ODBC_INCLUDES-NOTFOUND
ODBC_LIBRARY:FILEPATH=ODBC_LIBRARY-NOTFOUND
OPENSSL_CRYPTO_LIBRARY:FILEPATH=OPENSSL_CRYPTO_LIBRARY-NOTFOUND
OPENSSL_SSL_LIBRARY:FILEPATH=OPENSSL_SSL_LIBRARY-NOTFOUND
PAM_LIBRARY:FILEPATH=PAM_LIBRARY-NOTFOUND
READLINE_INCLUDE_DIR:PATH=READLINE_INCLUDE_DIR-NOTFOUND
READLINE_LIBRARY:FILEPATH=READLINE_LIBRARY-NOTFOUND
SEMODULE_PACKAGE:FILEPATH=SEMODULE_PACKAGE-NOTFOUND
SNAPPY_INCLUDE_DIRS:PATH=SNAPPY_INCLUDE_DIRS-NOTFOUND
SNAPPY_LIBRARIES:FILEPATH=SNAPPY_LIBRARIES-NOTFOUND
URING_INCLUDE_DIRS:PATH=URING_INCLUDE_DIRS-NOTFOUND
URING_LIBRARIES:FILEPATH=URING_LIBRARIES-NOTFOUND
ZLIB_INCLUDE_DIR:PATH=ZLIB_INCLUDE_DIR-NOTFOUND
ZLIB_LIBRARY_DEBUG:FILEPATH=ZLIB_LIBRARY_DEBUG-NOTFOUND
ZLIB_LIBRARY_RELEASE:FILEPATH=ZLIB_LIBRARY_RELEASE-NOTFOUND
libmongoc-1.0_DIR:PATH=libmongoc-1.0_DIR-NOTFOUND
[root@localhost build]#
  1. 处理yum无法使用的问题
    通过设置预加载环境变量
export LD_PRELOAD="/usr/local/lib64/libcrypto.so.1.1:/usr/local/lib64/libssl.so.1.1:/usr/lib64/liblzma.so.5"
  1. 关于无法生成libperl.so的说明
# 需要添加参数
./Configure -des -Dprefix=/usr/local -Duseshrplib  -Dusethreads -Uversiononly
# 需要设置环境变量
declare -x LD_LIBRARY_PATH="/usr/local/src/perl5-5.26.3​:/usr/local/lib:/usr/local/lib64"
  1. 关于ldd无法使用的说明
# 老版本的使用全路径
/bin/ldd xxx.so
# 新版本的直接ldd
ldd xxx.so
  1. 关于readline报错
    checking for rl_initialize in -lreadline... no
    configure: error: libreadline is required!
# 干掉编译安装生成的备份
rm -rf /usr/local/lib/libreadline.*.old
  1. 关于error: Couldn’t exec /usr/local/lib/rpm/elfdeps: No such file or directory

[[[#^libelf|依赖 libelf]]]
依赖 libelf

需要编译安装 libelf

  1. 关于mysql/mariadb启动程序
    启动服务调用的mysql来自
    /usr/local/src/mariadb-11.4.4/cmake-build/support-files/mysql.server
    也就是说将mysql.server重命名为了mysqld放到了/usr/libexec路径下
\cp /usr/local/src/mariadb-11.4.4/cmake-build/support-files/mysql.server /usr/libexec/mysqld
  1. 关于报错 php8.3 编译报错

PHP 8.3.0 build fails on centos 8 with the error:

/usr/bin/ld: dynamic STT_GNU_IFUNC symbol `mb_utf16be_to_wchar' with pointer equality in `ext/mbstring/libmbfl/filters/mbfilter_utf16.o' can not be used when making an executable; recompile with -fPIE and relink with -pie
collect2: error: ld returned 1 exit status

解决办法：

Workaround if you don't want to install gcc-toolset-* : configure with --enable-mbstring=shared  
this issue occured only if mbstring is not compiled as a shared extension (you also need to add extension=mbstring.so to your php.ini)
  1. 关于缺少 liblber-2.4.so.2
    解决办法：
    需要openldap 依赖 openldap [[[#^openldap|依赖 openldap]]]

参考
^cankao

Zabbix 7.0编译部署教程

# 8.3.0 build fails

您可能感兴趣的与本文相关的镜像

Python3.9

Python3.9

Conda
Python

Python 是一种高级、解释型、通用的编程语言，以其简洁易读的语法而闻名，适用于广泛的应用，包括Web开发、数据分析、人工智能和自动化脚本

Druid多数据源配置(Datasurce动态切换)
weixin_43695916的博客
07-29 5888
Druid多数据源配置(Datasurce动态切换) 提示: 本材料只做个人学习参考,不作为系统的学习流程,请注意识别!!! JVMDruid多数据源配置(Datasurce动态切换)一. 直接上代码二. AbstractRoutingDataSource 补充 一. 直接上代码 多数据源切换自定义注解 package com.gateway.admin.datasources.annotation; import java.lang.annotation.*; /** * 多数据源注解 */
spring cloud config配置中心源码分析之注解@EnableConfigServer
m0_37941483的博客
02-23 4085
spring cloud config配置中心源码分析之注解@EnableConfigServer 基于spring-cloud-config-server-2.0.2.RELEASE代码 spring cloud config的主函数是ConfigServerApplication，其定义如下： package com.liuwen; import org.springframework....
# @EnableConfigServer 注解报红，无法导入的问题
最新发布
段子手168的博客
05-13 781
@EnableConfigServer 注解报红， @EnableConfigServer 注解无法导入的问题
SSM整合 spring + springmvc + mybatis 巨详细步骤，从0开始
awodwde的博客
08-30 781
spring + springmvc + mybatis
properties 占位符
feiyeguohai1的博客
05-16 692
MessageFormat   -   java.text.MessageFormat   类允许你使用运行时指定的参数替换一个消息字符串中的一部分（在这种情况下，是一个从一个资源包得到的消息）。这在你创建一个句子的场合中是有用的，但是词会以不同的语言按照不同的顺序出现。消息中的占位符字符串{0}用第一个运行时参数替换，{1}用第二个运行时参数替换，以此类推。   要这样做，必须首先创建两个资源束...
基于mscs-win_2003双机热备_oracle_10g_配置文档
06-25
【基于mscs-win_2003双机热备_oracle_10g_配置文档】 本配置文档主要介绍如何在Windows Server 2003环境下，利用Dell PowerVault MD3000磁盘存储阵列实现双机热备，并结合Oracle 10g数据库进行高可用性设置。双机...
精选资源
免费双机热备 高可用 双机热备工具软件
05-19
对于用户来说，仔细阅读这个文件非常重要，可以确保正确、安全地安装和配置双机热备系统。 总结而言，这个免费双机热备工具为Windows用户提供了一种实现高可用性的解决方案，通过监控、故障检测、虚拟IP管理和启动...
win_XXXX双机热备_oracle_10g_(基于mscs)配置文档.docx
05-04
【Oracle 10g 双机热备配置详解】 Oracle 10g 双机热备配置是一项确保数据库高可用性的关键任务，特别是在关键业务环境中。本配置文档旨在指导如何在Windows Server 2003环境下，利用Dell PowerVault MD3000存储...
MyBatis初级实战之四：druid多数据源
程序员欣宸的博客
08-27 5567
完整的springboot+mybatis+druid多数据源开发和验证
Springboot继承JWT
柒七的博客
02-06 1013
后台SpringBoot 引入依赖： 加入工具类TokenUtils生成Token，genToken这个方法主要是根据用户的信息生成token的，这个token里面存储了userId，使用用户密码进行加密，默认的过期时间是1天。 ​ <!-- JWT --> <dependency> <groupId>com.auth0</groupId> <artifactId>java-jwt</artifactI..
如何在SpringBoot中使用@Value注解来设置默认值
热门推荐
qq_39939541的博客
07-22 2万+
使用@Value注解可以为属性设置默认值，可以在配置文件中使用${propertyName:defaultValue}语法为基本类型、字符串类型、数组和集合类型的属性设置默认值，也可以使用SpEL表达式为Map类型的属性设置默认值。使用@Value注解设置默认值可以使应用程序在缺少配置值时有一个合理的默认行为。
js生成json文件
Zing_ing的博客
11-19 771
【代码】js生成json文件。
maven - springboot 的 继承 和 导入
liyang_com的博客
11-06 855
版权声明：本文为博主原创文章，未经博主允许不得转载。 https://blog.youkuaiyun.com/besto229/article/details/83791217 1.继承 springboot pom: &lt;parent&gt; &l...
properties随机数与配置文件占位符
IT1995的博客
03-04 5023
目录 理论 例子 理论 RandomValuePropertySource：配置文件中可以使用随机数 ${random.value}、${random.int}、${random.long}、${random.int(10)}、${random.int[1024, 65534]} 属性配置占位符 people.name="你妹" people.alias=${peopl...
快速上手SpringBoot继承SpringSecurity(安全框架)详细教程！
SYJ的博客
08-03 1472
新手快速上手安全框架SpringBoot继承SpringSecurity详细教程！+项目
JAVA：Spring Boot 集成 Druid 多数据源配置
木头
06-26 5778
本文介绍了在Spring Boot项目中集成Druid连接池并配置多数据源的方法。主要内容包括：1）通过自定义注解和切面实现动态数据源切换；2）使用ThreadLocal维护数据源队列；3）配置Druid连接池参数；4）支持主从数据源结构。该方案采用动态数据源设计，只需调整新数据源配置而无需修改原有结构，具有较好的扩展性。文章提供了完整的代码示例和配置文件说明，适用于微服务架构下的多数据源管理需求。
SpringCloud之Config分布式远程配置中心
不经意的博客
06-16 432
一、什么是分布式配置中心？用来干嘛的？ Spring Cloud Config 是一种用来动态获取Git、SVN、本地配置文件的一种工具 在spring cloud项目中，都会配置一个配置中心去管理各个服务的配置文件，而往往配置文件不会放到本地配置中心，一般都会放到git上，也就是配置文件与项目分离，放在git或者svn上统一管理。既可以多个项目的配置文件共用一个仓库，也可以每个项目分别一个仓库！！ 接下来我们看看如何来搭建config服务端和客户端： 1.先创建一个名为springcloud-co
SpringCloud Config配置中心
weixin_42914989的博客
02-26 328
14、Config：配置中心介绍 在分布式系统中，由于微服务数量特别多，配置文件分散在不同的微服务中，不方便管理。为了更方便管理配置文件，就需要统一管理的配置中心。Spring Cloud 提供了Spring Cloud Config，它支持配置文件统一管理，可以把全部微服务的配置文件放在Git远程仓库（GitHub、gitee码云）。 使用Spring Cloud Config配置中心后的架构如下图： 官网学习文档：https://cloud.spring.io/spring-cloud-static/
基于Spring Cloud Config的远程配置中心搭建
weixin_39519416的博客
08-25 290
基于Spring Cloud组件的远程配置中心分为两部分：Config Server部分 Config Client（此处没有引入注册中心，Config Client通过IP直连到配置中心Config Server） 配置中心项目 config 1、引入必要的POM依赖： <dependency> <groupId>org.springframework.c...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

NoYoWiFi

感谢大佬赐赏

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付：¥1
获取中
扫码支付

您的余额不足，请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值