Solaris10安装日志

 

{0} ok boot cdrom   

光盘启动

Boot device: /pci@400/pci@0/pci@1/pci@0/usb@0,2/hub@4/device@4/storage@0/disk@0:f  File and args:

SunOS Release 5.10 Version Generic_142909-17 64-bit

Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved.

Configuring devices.

Using RPC Bootparams for network configuration information.

Attempting to configure interface nxge3...

NOTICE: nxge1: xcvr addr:0x1c - link is down

NOTICE: nxge2: xcvr addr:0x1b - link is down

NOTICE: nxge0: xcvr addr:0x1d - link is down

NOTICE: nxge3: xcvr addr:0x1a - link is down

Skipped interface nxge3

Attempting to configure interface nxge2...

Skipped interface nxge2

Attempting to configure interface nxge1...

Skipped interface nxge1

Attempting to configure interface nxge0...

Skipped interface nxge0

Attempting to configure interface e1000g1...

Skipped interface e1000g1

Attempting to configure interface e1000g0...

Skipped interface e1000g0

Reading ZFS config: done.

Setting up Java. Please wait...

Serial console, reverting to text install

Beginning system identification...

Searching for configuration file(s)...

Search complete.

Discovering additional network configuration...

 

Select a Language

 

   0. English

   1. Brazilian Portuguese

   2. French

   3. German

   4. Italian

   5. Japanese

   6. Korean

   7. Simplified Chinese

   8. Spanish

   9. Swedish

  10. Traditional Chinese

 

Please make a choice (0 - 10), or press h or ? for help: 0

安装语言英文

 

What type of terminal are you using?

 1) ANSI Standard CRT

 2) DEC VT52

 3) DEC VT100

 4) Heathkit 19

 5) Lear Siegler ADM31

 6) PC Console

 7) Sun Command Tool

 8) Sun Workstation

 9) Televideo 910

 10) Televideo 925

 11) Wyse Model 50

 12) X Terminal Emulator (xterms)

 13) CDE Terminal Emulator (dtterm)

 14) Other

Type the number of your choice and press Return: 3

终端类型VT100

Completing system identification...

in.rdisc: No interfaces up

  The Solaris installation program is divided into a series of short sections

  where you'll be prompted to provide information for the installation. At

  the end of each section, you'll be able to change the selections you've

  made before continuing.

 

  About navigation...

        - The mouse cannot be used

        - If your keyboard does not have function keys, or they do not

          respond, press ESC; the legend at the bottom of the screen

Identify This System

  On the next screens, you must identify this system as networked or

  non-networked, and set the default time zone and date/time.

 

  If this system is networked, the software will try to find the information

  it needs to identify your system; you will be prompted to supply any

  information it cannot find.

 

Network Connectivity

 

  Specify Yes if the system is connected to the network by one of the Solaris

  or vendor network/communication Ethernet cards that are supported on the

  Solaris CD. See your hardware documentation for the current list of

  supported cards.

  Specify No if the system is connected to a network/communication card that

  is not supported on the Solaris CD, and follow the instructions listed under

  Help.

 

 

      Networked

      [X] Yes

安装时进行网络配置

Configure Multiple Network Interfaces

 

  Multiple network interfaces have been detected on this system.  Specify all

  of the network interfaces you want to configure.

 

  Note: You must choose at least one interface to configure.

 

      Network interfaces

      [X] e1000g0

选择第一块网卡

      [ ] e1000g1

      [ ] nxge0

      [ ] nxge1

      [ ] nxge2

DHCP for e1000g0

 

  Specify whether or not this network interface should use DHCP to configure

  itself.  Choose Yes if DHCP is to be used, or No if the network interface is

  to be configured manually.

 

  NOTE: DHCP support will not be enabled, if selected, until after the system

  reboots.

 

      Use DHCP for e1000g0

      [ ] Yes

      [X] No

不通过DHCP自动获取IP

Host Name for e1000g0

  Enter the host name which identifies this system on the network.  The name

  must be unique within your domain; creating a duplicate host name will cause

  problems on the network after you install Solaris.

 

  A host name must have at least one character; it can contain letters,

  digits, and minus signs (-).

 

               Host name for e1000g0 ys-db  

配置主机名                        

 

               Host name for e1000g0 ys-db

 

IP Address for e1000g0 10.101.1.68

配置主机的IP地址

 

  Enter the Internet Protocol (IP) address for this network interface.  It

  must be unique and follow your site's address conventions, or a

  system/network failure could result.

 

  IP addresses contain four sets of numbers separated by periods (for example

  129.200.9.1).

 

 

Subnet for e1000g0

  On this screen you must specify whether this system is part of a subnet.  If

  you specify incorrectly, the system will have problems communicating on the

  network after you reboot.

 

  > To make a selection, use the arrow keys to highlight the option and

    press Return to mark it [X].

 

 

      System part of a subnet

      [X] Yes

配置子网掩码

Netmask for e1000g0 255.255.255.192

 

  On this screen you must specify the netmask of your subnet.  A default

  netmask is shown; do not accept the default unless you are sure it is

  correct for your subnet.  A netmask must contain four sets of numbers

  separated by periods (for example 255.255.255.0).

 

 

IPv6 for e1000g0

 

  Specify whether or not you want to enable IPv6, the next generation Internet

  Protocol, on this network interface.  Enabling IPv6 will have no effect if

  this machine is not on a network that provides IPv6 service.  IPv4 service

  will not be affected if IPv6 is enabled.

 

  > To make a selection, use the arrow keys to highlight the option and

    press Return to mark it [X].

 

 

      Enable IPv6 for e1000g0

      [ ] Yes

      [X]No

不配置IPV6的地址

Set the Default Route for e1000g0

 

  To specify the default route, you can let the software try to detect one

  upon reboot, you can specify the IP address of the router, or you can choose

  None.  Choose None if you do not have a router on your subnet.

 

  > To make a selection, use the arrow keys to select your choice and press

  Return to mark it [X].

 

 

      Default Route for e1000g0

      [ ] Detect one upon reboot

      [X] Specify one

指定一个路由地址

      [X] Detect one upon reboot

      [ ] Detect one upon reboot

Default Route IP Address for e1000g0 10.101.1.65

输入路由地址

 

  Enter the IP address of the default route. This entry will be placed in the

  /etc/defaultrouter file and will be the default route after you reboot

  (example 129.146.89.225).

 

 

 

Confirm Information for e1000g0

 

  > Confirm the following information.  If it is correct, press F2;

    to change any information, press F4.

 

 

                          Networked: Yes

                           Use DHCP: No

                          Host name: ys-db

                         IP address: 10.101.1.68

            System part of a subnet: Yes

                            Netmask: 255.255.255.192

                        Enable IPv6: No

                      Default Route: Specify one

  Just a moment...

 

Configure Security Policy:

 

  Specify Yes if the system will use the Kerberos security mechanism.

 

  Specify No if this system will use standard UNIX security.

 

      Configure Kerberos Security

      [ ] Yes

      [X]No

不启用Kerberos安全策略

 Confirm Information

 

  > Confirm the following information.  If it is correct, press F2;

    to change any information, press F4.

 

 

  Please wait...

Name Service

 

  On this screen you must provide name service information.  Select the name

  service that will be used by this system, or None if your system will either

  not use a name service at all, or if it will use a name service not listed

  here.

 

  > To make a selection, use the arrow keys to highlight the option

    and press Return to mark it [X].

 

 

      Name service

      [ ] NIS+

      [ ] NIS

      [ ] DNS

      [ ] LDAP

      [X] None

不设置命名服务器

      [X] NIS+

      [ ] NIS

      [ ] DNS

      [ ] LDAP

      [ ] NIS+

      [ ] NIS

      [ ] DNS

      [ ] LDAP

 Confirm Information

 

  > Confirm the following information.  If it is correct, press F2;

    to change any information, press F4.

 

 

Just a moment...

 

 done.

NFSv4 Domain Name

 

  NFS version 4 uses a domain name that is automatically derived from the

  system's naming services. The derived domain name is sufficient for most

  configurations. In a few cases, mounts that cross domain boundaries might

  cause files to appear to be owned by "nobody" due to the lack of a common

  domain name.

 

  The current NFSv4 default domain is: ""

 

 

      NFSv4 Domain Configuration

      [X] Use the NFSv4 domain derived by the system

使用系统的域名服务器

Confirm Information for NFSv4 Domain

 

  > Confirm the following information.  If it is correct, press F2;

    to change any information, press F4.

 

 

Time Zone

  On this screen you must specify your default time zone.  You can specify a

  time zone in three ways:  select one of the continents or oceans from the

  list, select other - offset from GMT, or other - specify time zone file.

 

  > To make a selection, use the arrow keys to highlight the option and

    press Return to mark it [X].

 

 

      Continents and Oceans

  -   [ ] Africa

  x   [ ] Americas

  x   [ ] Antarctica

  x   [ ] Arctic Ocean

  x   [ ] Asia

  x   [ ] Atlantic Ocean

  x   [ ] Australia

  x   [ ] Europe

  v   [ ] Indian Ocean

 

  -   [ ] Africa

  x   [ ] Americas

  x   [ ] Antarctica

  x   [ ] Arctic Ocean

  x   [X] Asia

配置所属洲

  x   [ ] Atlantic Ocean

  x   [ ] Australia

  x   [ ] Europe

  ^   [ ] Americas

  x   [ ] Antarctica

  x   [ ] Arctic Ocean

  x   [X] Asia

  x   [ ] Atlantic Ocean

  x   [ ] Australia    

  x   [ ] Europe  

  x   [ ] Indian Ocean

  ^   [ ] Antarctica

  x   [ ] Arctic Ocean

  x   [X] Asia

  x   [ ] Atlantic Ocean

  x   [ ] Australia    

  x   [ ] Europe       

  x   [ ] Indian Ocean

  x   [ ] Pacific Ocean

  ^   [ ] Arctic Ocean

  x   [X] Asia

  x   [ ] Atlantic Ocean

  x   [ ] Australia    

  x   [ ] Europe       

  x   [ ] Indian Ocean 

  x   [ ] Pacific Ocean

  x   [ ] other - offset from GMT

Country or Region

 

  > To make a selection, use the arrow keys to highlight the option and

    press Return to mark it [X].

 

 

      Countries and Regions

  -   [ ] Afghanistan

  x   [ ] Armenia

  x   [ ] Azerbaijan

  x   [ ] Bahrain

  x   [ ] Bangladesh

  x   [ ] Bhutan

  x   [ ] Brunei

  x   [ ] Cambodia

  x   [ ] China

  x   [ ] Cyprus

  x   [ ] East Timor

  x   [ ] Georgia

  v   [ ] Hong Kong

 

  -   [ ] Afghanistan

  x   [ ] Armenia

  x   [ ] Azerbaijan

  x   [ ] Bahrain

  x   [ ] Bangladesh

  x   [ ] Bhutan

  x   [ ] Brunei

  x   [ ] Cambodia

  x   [ ] China

  x   [ ] Cyprus

  x   [ ] East Timor

  x   [ ] Georgia

  ^   [ ] Armenia   

  x   [ ] Azerbaijan

  x   [ ] Bahrain  

  x   [ ] Bangladesh

  x   [ ] Bhutan   

  x   [ ] Brunei

  x   [ ] Cambodia

  x   [ ] China  

  x   [ ] Cyprus

  x   [ ] East Timor

  x   [ ] Georgia  

  x   [ ] Hong Kong

  ^   [ ] Azerbaijan

  x   [ ] Bahrain  

  x   [ ] Bangladesh

  x   [ ] Bhutan   

  x   [ ] Brunei   

  x   [ ] Cambodia

  x   [X] China  

配置所属国家

  x   [ ] Cyprus 

  x   [ ] East Timor

  x   [ ] Georgia  

  x   [ ] Hong Kong

  x   [ ] India   

  ^   [ ] Bahrain   

  x   [ ] Bangladesh

  x   [ ] Bhutan   

  x   [ ] Brunei   

  x   [ ] Cambodia 

  x   [ ] China  

  x   [ ] Cyprus 

  x   [ ] East Timor

  x   [ ] Georgia  

  x   [ ] Hong Kong

  x   [ ] India    

  x   [ ] Indonesia

  x   [ ] Indonesia

  x   [ ] India    

  x   [ ] Hong Kong

  x   [ ] Georgia  

  x   [ ] East Timor

  x   [ ] Cyprus 

  x   [ ] China  

 

Date and Time

  > Accept the default date and time or enter

    new values.

 

  Date and time: 2012-02-13 10:53

 

                 Year   (4 digits) : 2012

                 Month  (1-12)     : 02

                 Day    (1-31)     : 13

                 Hour   (0-23)     : 10

  Date and time: 2012-02-13 10:53

确认时间

Confirm Information

 

  > Confirm the following information.  If it is correct, press F2;

    to change any information, press F4.

 

 

                          Time zone: PRC

  Please wait...

Root Password

  Please enter the root password for this system.

 

  The root password may contain alphanumeric and special characters.  For

  security, the password will not be displayed on the screen as you type it.

 

  > If you do not want a root password, leave both entries blank.

 

 

                     Root password:                  输入密码

Enabling remote services

 

  Would you like to enable network services for use by remote clients?

 

  Selecting "No" provides a more secure configuration in

  which Secure Shell is the only network service provided to

  remote clients.  Selecting "Yes" enables a larger set of

  services as in previous Solaris releases. If in doubt, it is

  safe to select "No" as any services can be individually enabled

  after installation.

 

  Note: This choice only affects initial installs. It doesn't affect upgrades.

 

 

      Remote services enabled

      [X] Yes

启用远程连接服务

      [ ] No

 

Provide Solaris Auto Registration Info:

 

  To improve products and services, Oracle Solaris communicates configuration

  data to Oracle after rebooting.

 

  You can register your version of Oracle Solaris to capture this data for

  your use, or the data is sent anonymously.

 

  For information about what configuration data is communicated and how to

  control this facility, see the Release Notes or

  www.oracle.com/goto/solarisautoreg.

 

  > Use the arrow keys to select the option and press Return to

     mark it [X].

 

      [ ] I would like to register using My Oracle Support information.

不进行注册

 

Provide Solaris Auto Registration Info:

 

  To send the configuration data anonymously, complete the following fields.

  If using a proxy server, provide the proxy settings.

 

  For information about what configuration data is communicated and how to

  control this facility, see the Release Notes or

  www.oracle.com/goto/solarisautoreg.

 

 

 

             Proxy Server Host Name:                                         

           Proxy Server Port Number:

               HTTP Proxy User Name:

不设置代理

System identification is completed.

System identification complete.

Starting Solaris installation program...

Executing JumpStart preinstall phase...

Searching for SolStart directory...

Checking rules.ok file...

Using begin script: install_begin

Using finish script: patch_finish

Executing SolStart preinstall phase...

Executing begin script "install_begin"...

Begin script install_begin execution completed.

Solaris Interactive Installation

  On the following screens, you can accept the defaults or you can customize

  how Solaris software will be installed by:

 

        - Selecting the type of Solaris software to install

        - Selecting disks to hold software you've selected

        - Selecting unbundled products to be installed with Solaris

        - Specifying how file systems are laid out on the disks

 

  After completing these tasks, a summary of your selections (called a

  profile) will be displayed.

 

  There are two ways to install your Solaris software:

 

   - "Standard" installs your system from a standard Solaris Distribution.

      Selecting "Standard" allows you to choose between initial install

      and upgrade, if your system is upgradable.

   - "Flash" installs your system from one or more Flash Archives.

进行标准安装

 

Eject a CD/DVD Automatically?

  During the installation of Solaris software, you may be using one or more

  CDs/DVDs. You can choose to have the system eject each CD/DVD automatically

  after it is installed or you can choose to manually eject each CD/DVD.

 

 

            [X] Automatically eject CD/DVD

自动弹出光驱

Reboot After Installation?

 

  After Solaris software is installed, the system must be rebooted. You can

  choose to have the system automatically reboot, or you can choose to

  manually reboot the system if you want to run scripts or do other

  customizations before the reboot.  You can manually reboot a system by using

  the reboot(1M) command.

 

 

            [X] Auto Reboot

自动重新启动系统

Solaris Interactive Installation

 

  This system is upgradable, so there are two ways to install the Solaris

  software.

 

  The Upgrade option updates the Solaris software to the new release, saving

  as many modifications to the previous version of Solaris software as

  possible.  Back up the system before using the Upgrade option.

 

  The Initial option overwrites the system disks with the new version of

  Solaris software.  This option allows you to preserve any existing file

  systems.  Back up any modifications made to the previous version of Solaris

  software before starting the Initial option.

 

  After you select an option and complete the tasks that follow, a summary of

   Please wait ...

Initializing

 License

        You acknowledge that your use of this software is subject to (i) the

        license terms that you accepted when you obtained a right to use this

        software; or (ii) the license terms that you signed when you placed your

        software order with us; or, if neither (i) or (ii) are applicable, then,

        (iii) the Oracle Electronic Delivery Trial  License Agreement (which you

        acknowledge that you have read and understand), available at

        edelivery.oracle.com.  Note: Software downloaded for trial use or

        downloaded as replacement media may not be used to update any

License

Select Geographic Regions

 

  Select the geographic regions for which support should be installed.

 

  > [ ] South America

  > [ ] Central America

  > [ ] North America

  > [ ] Australasia

  > [ ] Western Europe

  > [ ] Northern Europe

  > [ ] Central Europe

  > [ ] Southern Europe

  > [ ] Eastern Europe

  > [x] Asia

安装语言包

  > [ ] Middle East

  > [ ] Northern Africa

  > [ ] Southern Africa

 

  Select the initial locale to be used after the system has been installed.

 

[X]     POSIX C ( C )

选择系统语言英文

        Asia

    [ ]     Bengali, India (UTF-8) ( bn_IN.UTF-8 )

    [ ]     Chinese, Singapore (UTF-8) ( zh_SG.UTF-8 )

    [ ]     English, India (UTF-8) ( en_IN.UTF-8 )

    [ ]     English, Singapore (UTF-8) ( en_SG.UTF-8 )

    [ ]     Gujarati, India (UTF-8) ( gu_IN.UTF-8 )

    [ ]     Hindi UTF-8 ( hi_IN.UTF-8 )

    [ ]     Indonesian (UTF-8) ( id_ID.UTF-8 )

    [ ]     Japanese EUC (ja) ( ja )

    [ ]     Japanese PC Kanji (ja_JP.PCK) ( ja_JP.PCK )

    [ ]     Japanese UTF-8 (ja_JP.UTF-8) ( ja_JP.UTF-8 )

    [ ]     Kannada, India (UTF-8) ( kn_IN.UTF-8 )

    [ ]     Korean EUC ( ko )

    [ ]     Korean UTF-8 ( ko.UTF-8 )

    [ ]     Malay, Malaysia (UTF-8) ( ms_MY.UTF-8 )

 

Additional Products

  To scan for additional products, select the location you wish to scan.

  Products found at the selected location that are in a Web Start Ready

  install form will be added to the Products list.

 

  Web Start Ready product scan location:

 

 

      [X]  None

不浏览额外产品

      [ ]  CD/DVD

Choose Filesystem Type

 

  Select the filesystem to use for your Solaris installation

 

 

            [X] UFS

使用UFS文件系统

Select Software

  Select the Solaris software to install on the system.

 

  NOTE: After selecting a software group, you can add or remove software by

  customizing it. However, this requires understanding of software

  dependencies and how Solaris software is packaged.

 

      [ ]  Entire Distribution plus OEM support ....... 8067.00 MB

      [X]  Entire Distribution ........................ 8026.00 MB

企业版安装

      [ ]  Developer System Support ................... 7794.00 MB

      [ ]  End User System Support .................... 6509.00 MB

      [ ]  Core System Support ........................ 1684.00 MB

 

  On this screen you must select the disks for installing Solaris software.

  Start by looking at the Suggested Minimum field; this value is the

  approximate space needed to install the software you've selected. Keep

  selecting disks until the Total Selected value exceeds the Suggested Minimum

  value.

  NOTE: ** denotes current boot disk

 

  Disk Device                                              Available Space

  =============================================================================

[X]    c1t3d0                                           286090 MB  (F4 to edit

[X]    c1t2d0                                           286090 MB  (F4 to edit

[X]    c1t1d0                                           286090 MB  (F4 to edit

 [X]    c1t0d0                                           286090 MB  (F4 to edit

配置全部硬盘

 

^                    System Locale: C ( C )

 x

 x                         Software: Solaris 10, Entire Distribution

 x

 x      File System and Disk Layout: /                   c1t0d0s0 50000 MB

 x                                   /swap               c1t0d0s1 64001 MB

 x                                   /export/home        c1t0d0s3 50000 MB

 x                                   /var                c1t0d0s4 61004 MB

 x                                   /usr                c1t0d0s5 61004 MB

 x                                   /opt                c1t1d0s0 150000 MB    

 x                                   /data1              c1t1d0s1 136004 MB    

 x                                   /data               c1t2d0s0 286004 MB    

 x                                   /backup             c1t3d0s0 286004 MB    

划分文件系统

        The following disk configuration condition(s) have been

        detected. Errors must be fixed to ensure a successful

        installation. Warnings can be ignored without causing the

        installation to fail.

 

        WARNING: Unused disk space (c1t0d0)

 

        WARNING: Unused disk space (c1t1d0)

 

        WARNING: Unused disk space (c1t2d0)

 

Preparing system for Solaris install

 

Configuring disk (c1t0d0)

        - Creating Solaris disk label (VTOC)

 

Configuring disk (c1t1d0)

        - Creating Solaris disk label (VTOC)

 

Configuring disk (c1t2d0)

        - Creating Solaris disk label (VTOC)

 

Configuring disk (c1t3d0)

        - Creating Solaris disk label (VTOC)

 

Creating and checking file systems

        - Creating / (c1t0d0s0)

        - Creating /swap (c1t0d0s1)

        - Creating /export/home (c1t0d0s3)

        - Creating /var (c1t0d0s4)

        - Creating /usr (c1t0d0s5)

        - Creating /opt (c1t1d0s0)

        - Creating /data1 (c1t1d0s1)

        - Creating /data (c1t2d0s0)

        - Creating /backup (c1t3d0s0)

 

Beginning Solaris software installation

 

 

 

 

     Solaris Initial Install

 

 

            MBytes Installed:     0.00

            MBytes Remaining:  5025.96

 

                  Installing: Java DMK 5.1 minimal subset

 

 

 

 

          -

          |           |           |           |           |           |

            MBytes Installed:     1.25

            MBytes Remaining:  5024.71

 

                  Installing: Live Upgrade Configuration

 

Installing Additional Software

|-1%--------------25%-----------------50%-----------------75%--------------100%|

 

   Pausing for 30 seconds at the "Summary" screen. The wizard will continue to

   the next step unless you select "Pause". Enter 'p' to pause. Enter 'c' to

   continue. [c]

 

   Pausing for 90 seconds at the "Reboot" screen. The wizard will continue to

   the next step unless you select "Pause". Enter 'p' to pause. Enter 'c' to

   continue. [c]

Creating boot_archive for /a

updating /a/platform/sun4v/boot_archive

syncing file systems... done

rebooting...

Resetting...

 

 

T5240, Keyboard Present

Copyright (c) 1998, 2011, Oracle and/or its affiliates. All rights reserved.

OpenBoot 4.32.5, 32544 MB memory available, Serial #96294366.

Ethernet address 0:21:28:bd:55:de, Host ID: 85bd55de.

 

 

 

Boot device: disk  File and args:

SunOS Release 5.10 Version Generic_142909-17 64-bit

Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved.

Hostname: ys-db

Configuring devices.

Loading smf(5) service descriptions: 185/185

Reading ZFS config: done.

Configure Keyboard Layout

 

  Please specify the keyboard layout from the list below.

 

  > To make a selection, use the arrow keys to highlight the option and

    press Return to mark it [X].

 

 

      Keyboard Layout

  ^   [ ] Slovak

  x   [ ] Slovenian

  x   [ ] Spanish

  x   [ ] Swedish

  x   [ ] Swiss-French

  x   [ ] Swiss-German

  x   [ ] Taiwanese

  x   [ ] TurkishF

  x   [ ] TurkishQ

  x   [ ] UK-English

  -   [X] US-English

选择美式键盘