//压缩图片
/**
* 安装一定的比例压缩图片
* @param srcPath
* @return
*/
public static Bitmap getimage(String srcPath) {
BitmapFactory.Options newOpts = new BitmapFactory.Options();
//开始读入图片,此时把options.inJustDecodeBounds 设回true了
newOpts.inJustDecodeBounds = true;
Bitmap bitmap = BitmapFactory.decodeFile(srcPath,newOpts);//此时返回bm为空
newOpts.inJustDecodeBounds = false;
int w = newOpts.outWidth;
int h = newOpts.outHeight;
//现在主流手机比较多是800*480分辨率,所以高和宽我们设置为
float hh = 800f;//这里设置高度为800f
float ww = 480f;//这里设置宽度为480f
//缩放比。由于是固定比例缩放,只用高或者宽其中一个数据进行计算即可
int be = 1;//be=1表示不缩放
if (w > h && w > ww) {//如果宽度大的话根据宽度固定大小缩放
be = (int) (newOpts.outWidth / ww);
} else if (w < h && h > hh) {//如果高度高的话根据宽度固定大小缩放
be = (int) (newOpts.outHeight / hh);
}
if (be <= 0)
be = 1;
newOpts.inSampleSize = be;//设置缩放比例
newOpts.inPreferredConfig = Bitmap.Config.ARGB_8888;
newOpts.inPurgeable = true;
newOpts.inInputShareable = true;
newOpts.inJustDecodeBounds = false;
//重新读入图片,注意此时已经把options.inJustDecodeBounds 设回false了
bitmap = BitmapFactory.decodeFile(srcPath, newOpts);
return compressImage(bitmap);//压缩好比例大小后再进行质量压缩
}
/**
* 压缩图片,让图片的大小小于等于100kb
* @param image
* @return
*/
public static Bitmap compressImage(Bitmap image) {
Bitmap c_bitmap = null ;
try {
ByteArrayOutputStream baos = new ByteArrayOutputStream();
image.compress(Bitmap.CompressFormat.JPEG, 100, baos);//质量压缩方法,这里100表示不压缩,把压缩后的数据存放到baos中
int options = 100;
while ( baos.toByteArray().length / 1024>100) { //循环判断如果压缩后图片是否大于100kb,大于继续压缩
baos.reset();//重置baos即清空baos
image.compress(Bitmap.CompressFormat.JPEG, options, baos);//这里压缩options%,把压缩后的数据存放到baos中
options -= 10;//每次都减少10
}
ByteArrayInputStream isBm = new ByteArrayInputStream(baos.toByteArray());//把压缩后的数据baos存放到ByteArrayInputStream中
c_bitmap = BitmapFactory.decodeStream(isBm, null, null);
return c_bitmap;
} catch (Exception e) {
return c_bitmap;
}
}
压缩图片
最新推荐文章于 2023-03-13 18:58:59 发布
本文介绍了一种根据固定比例压缩图片的方法,并进一步对图片进行质量压缩,确保压缩后的图片大小不超过100KB。该方法首先计算图片的缩放比例,然后使用指定的缩放比例加载图片,最后通过调整JPEG的压缩级别来减小文件大小。
3857

被折叠的 条评论
为什么被折叠?



