App installation failed could not write to the device.

最新推荐文章于 2024-05-26 16:33:56 发布
原创 最新推荐文章于 2024-05-26 16:33:56 发布 · 2.3k 阅读 · 1 ·
CC 4.0 BY-SA版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。

本文介绍了在真机测试过程中遇到莫名异常时的三种解决方案：删除应用并重新安装、清理项目并重新运行以及重启设备。作者推荐使用第二种和第三种方法结合的方式避免错误提示。

真机测试的时候莫名其妙的出现,再次运行时又没问题了大概有三种办法

1 删掉app,重新运行

2 clean项目,command + shift + K  ,再次运行

3 重启设备

个人感觉1治标不治本,我是通过2 + 3来避免该错误提示的

Linux: kdump & kexec: /etc/kdump.conf解析；kdumpctl；makedumpfile；CONFIG_KEXEC； crashkernel
mzhan017的博客
05-23 830
这里简单介绍kdump及kexec，怎么安装，怎么使用；这里说的内核是程序层的内核：正常内核 - 是硬件层的一个CPU驱动；驱动CPU正常运行，完成各项任务。如果CPU驱动，产生错误，会很严重，导致任务运行结果不可预知，出现磁盘文件损坏，等等。转储内核 - 这个转储内核不是当前正常运行的系统内核，而是在系统内核出现问题，无法运行时，用来将系统内核的内存转储到文件的一个小的内核环境。而这个小环境也是一个仅仅实现了内存转储功能的一个小的CPU驱动。
【】 Intel(R) 800 Series序列网卡 ice 驱动安装
小鱼菜鸟的博客
07-22 3190
概述 ======== 此驱动程序支持内核版本3.10.0及更新版本。但是，有些功能可能需要更新的内核版本。关联的虚拟功能(VF)驱动程序对于这个驱动程序，是iavf。可以使用ethtool、lspci和ip获取驱动程序信息。 更新ethtool时，说明书可在在本文件中稍后的“附加配置”部分中找到。 目前仅支持将此驱动程序作为可加载模块。英特尔不...
iOS 11 真机运行提示：App installation failed. Could not write to the device.
weixin_30376509的博客
11-14 331
手机从iOS 10.3更新到iOS 11.1之后，真机调试提示： App installation failed. Could not write to the device. 解决办法： 1.删除旧版本的App. 2.清除Xcode，再运行。 转载于:https://www.cnblogs.com/metersj/p/7832773.html...
could not write to the device
bellazhouyi的专栏
09-16 3304
仅仅就是 手机内存不够，所以………你懂的。
App installation failed, Could not write to the device.
且心的专栏
08-10 4116
运行报错 App installation failed, Could not write to the device.   原因&解决 我的是因为同一手机用不同电脑打包，把手机上的应用删掉，再运行就可以了。    ...
App installation failed.could not write to the device.
MinggeQingchun的博客
10-08 1万+
升级iOS11在真机上运行之前的app时，报错如下： App installation failed could not write to the device. 解决办法： 1、删除真机上的app 2、clean一下Xcode，重新运行app 3、清理iPhone上的内存 4、修改app的bundleID，但是不建议采用（同一个app）
IOS xcode 真机上出现 App installation failed Could not write to the device
sky_long_fly的专栏
01-22 1954
今天给同事手机装App的时候，发现一直报这个错误。首先是同事手机原来debug装的App打不开了，后来想了一下最近有更新过苹果的证书。把手机中原有的App(当然是你自己开发的那个App)删除后重新再debug就没有问题了。 ...
Android 9 (P) recovery升级Map of ‘@/cache/recovery/block.map‘ failed问题分析指南
IT先森
07-03 4339
Adnroid Precovery升级Map of '@/cache/recovery/block.map’failed问题分析指南 前言   自从Android 4.4将SELinux加入Android以后，这个东西虽然说有了安全但是在开发中经常会遇到一些莫名其妙的问题，本篇今天要说的就是就是由于SELinux规则问题导致的Map of '@/cache/recovery/block.map’failed无法升级问题。 注意:本篇讲解的代码是在Android P 高通8953平台。 一.问题复盘
PowerShell 7 环境已加载 (版本: 7.5.2) PowerShell 7 环境已加载 (版本: 7.5.2) PS C:\Users\Administrator\Desktop> cd E:\PyTorch_Build\pytorch PS E:\PyTorch_Build\pytorch> python -m venv rtx5070_env PS E:\PyTorch_Build\pytorch> .\rtx5070_env\Scripts\activate (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 修复之前的脚本错误 (rtx5070_env) PS E:\PyTorch_Build\pytorch> $fixedActivation = @" >> try { >> & "$activatePath" >> Write-Host "✅ 虚拟环境激活成功" -ForegroundColor Green >> python -VV >> } >> catch [System.Exception] { >> Write-Host "❌ 激活失败: $($_.Exception.Message)" -ForegroundColor Red >> } >> "@ InvalidOperation: Line | 3 | & "$activatePath" | ~~~~~~~~~~~~~ | The variable '$activatePath' cannot be retrieved because it has not been set. (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 切换到PyTorch源码目录 (rtx5070_env) PS E:\PyTorch_Build\pytorch> cd E:\PyTorch_Build\pytorch (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 更新pip到最新版 (rtx5070_env) PS E:\PyTorch_Build\pytorch> python -m pip install --upgrade pip Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple Requirement already satisfied: pip in e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages (22.3.1) Collecting pip Using cached https://pypi.tuna.tsinghua.edu.cn/packages/b7/3f/945ef7ab14dc4f9d7f40288d2df998d1837ee0888ec3659c813487572faa/pip-25.2-py3-none-any.whl (1.8 MB) Installing collected packages: pip Attempting uninstall: pip Found existing installation: pip 22.3.1 Uninstalling pip-22.3.1: Successfully uninstalled pip-22.3.1 Successfully installed pip-25.2 (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 安装编译依赖 (rtx5070_env) PS E:\PyTorch_Build\pytorch> pip install -r requirements-build.txt --verbose Using pip 25.2 from E:\PyTorch_Build\pytorch\rtx5070_env\lib\site-packages\pip (python 3.10) Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple Collecting setuptools<80.0,>=70.1.0 (from -r requirements-build.txt (line 2)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/0d/6d/b4752b044bf94cb802d88a888dc7d288baaf77d7910b7dedda74b5ceea0c/setuptools-79.0.1-py3-none-any.whl (1.3 MB) Collecting cmake>=3.27 (from -r requirements-build.txt (line 3)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/7c/d0/73cae88d8c25973f2465d5a4457264f95617c16ad321824ed4c243734511/cmake-4.1.0-py3-none-win_amd64.whl (37.6 MB) Collecting ninja (from -r requirements-build.txt (line 4)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/29/45/c0adfbfb0b5895aa18cec400c535b4f7ff3e52536e0403602fc1a23f7de9/ninja-1.13.0-py3-none-win_amd64.whl (309 kB) Link requires a different Python (3.10.10 not in: '>=3.11'): https://pypi.tuna.tsinghua.edu.cn/packages/f3/db/8e12381333aea300890829a0a36bfa738cac95475d88982d538725143fd9/numpy-2.3.0.tar.gz (from https://pypi.tuna.tsinghua.edu.cn/simple/numpy/) (requires-python:>=3.11) Link requires a different Python (3.10.10 not in: '>=3.11'): https://pypi.tuna.tsinghua.edu.cn/packages/2e/19/d7c972dfe90a353dbd3efbbe1d14a5951de80c99c9dc1b93cd998d51dc0f/numpy-2.3.1.tar.gz (from https://pypi.tuna.tsinghua.edu.cn/simple/numpy/) (requires-python:>=3.11) Link requires a different Python (3.10.10 not in: '>=3.11'): https://pypi.tuna.tsinghua.edu.cn/packages/37/7d/3fec4199c5ffb892bed55cff901e4f39a58c81df9c44c280499e92cad264/numpy-2.3.2.tar.gz (from https://pypi.tuna.tsinghua.edu.cn/simple/numpy/) (requires-python:>=3.11) Collecting numpy (from -r requirements-build.txt (line 5)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/a3/dd/4b822569d6b96c39d1215dbae0582fd99954dcbcf0c1a13c61783feaca3f/numpy-2.2.6-cp310-cp310-win_amd64.whl (12.9 MB) Collecting packaging (from -r requirements-build.txt (line 6)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/20/12/38679034af332785aac8774540895e234f4d07f7545804097de4b666afd8/packaging-25.0-py3-none-any.whl (66 kB) Collecting pyyaml (from -r requirements-build.txt (line 7)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/b5/84/0fa4b06f6d6c958d207620fc60005e241ecedceee58931bb20138e1e5776/PyYAML-6.0.2-cp310-cp310-win_amd64.whl (161 kB) Collecting requests (from -r requirements-build.txt (line 8)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/1e/db/4254e3eabe8020b458f1a747140d32277ec7a271daf1d235b70dc0b4e6e3/requests-2.32.5-py3-none-any.whl (64 kB) Collecting six (from -r requirements-build.txt (line 9)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/b7/ce/149a00dd41f10bc29e5921b496af8b574d8413afcd5e30dfa0ed46c2cc5e/six-1.17.0-py2.py3-none-any.whl (11 kB) Collecting typing-extensions>=4.10.0 (from -r requirements-build.txt (line 10)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/18/67/36e9267722cc04a6b9f15c7f3441c2363321a3ea07da7ae0c0707beb2a9c/typing_extensions-4.15.0-py3-none-any.whl (44 kB) Collecting charset_normalizer<4,>=2 (from requests->-r requirements-build.txt (line 8)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/e2/c6/f05db471f81af1fa01839d44ae2a8bfeec8d2a8b4590f16c4e7393afd323/charset_normalizer-3.4.3-cp310-cp310-win_amd64.whl (107 kB) Collecting idna<4,>=2.5 (from requests->-r requirements-build.txt (line 8)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/76/c6/c88e154df9c4e1a2a66ccf0005a88dfb2650c1dffb6f5ce603dfbd452ce3/idna-3.10-py3-none-any.whl (70 kB) Collecting urllib3<3,>=1.21.1 (from requests->-r requirements-build.txt (line 8)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/a7/c2/fe1e52489ae3122415c51f387e221dd0773709bad6c6cdaa599e8a2c5185/urllib3-2.5.0-py3-none-any.whl (129 kB) Collecting certifi>=2017.4.17 (from requests->-r requirements-build.txt (line 8)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/e5/48/1549795ba7742c948d2ad169c1c8cdbae65bc450d6cd753d124b17c8cd32/certifi-2025.8.3-py3-none-any.whl (161 kB) Installing collected packages: urllib3, typing-extensions, six, setuptools, pyyaml, packaging, numpy, ninja, idna, cmake, charset_normalizer, certifi, requests Attempting uninstall: setuptools Found existing installation: setuptools 65.5.0 Uninstalling setuptools-65.5.0: Removing file or directory e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages\_distutils_hack\ Removing file or directory e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages\distutils-precedence.pth Removing file or directory e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages\pkg_resources\ Removing file or directory e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages\setuptools-65.5.0.dist-info\ Removing file or directory e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages\setuptools\ Successfully uninstalled setuptools-65.5.0 Successfully installed certifi-2025.8.3 charset_normalizer-3.4.3 cmake-4.1.0 idna-3.10 ninja-1.13.0 numpy-2.2.6 packaging-25.0 pyyaml-6.0.2 requests-2.32.5 setuptools-79.0.1 six-1.17.0 typing-extensions-4.15.0 urllib3-2.5.0 (rtx5070_env) PS E:\PyTorch_Build\pytorch> pip install cmake ninja --upgrade Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple Requirement already satisfied: cmake in e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages (4.1.0) Requirement already satisfied: ninja in e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages (1.13.0) (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 清理旧编译产物 (rtx5070_env) PS E:\PyTorch_Build\pytorch> Remove-Item -Recurse -Force build, dist -ErrorAction SilentlyContinue (rtx5070_env) PS E:\PyTorch_Build\pytorch> Write-Host "`n==== 编译环境验证 ====" -ForegroundColor Cyan ==== 编译环境验证 ==== (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 1. 目录验证 (rtx5070_env) PS E:\PyTorch_Build\pytorch> Write-Host "当前目录: $pwd" 当前目录: E:\PyTorch_Build\pytorch (rtx5070_env) PS E:\PyTorch_Build\pytorch> if ($pwd -ne "E:\PyTorch_Build\pytorch") { >> Write-Host "⚠️ 错误: 需要切换到E:\PyTorch_Build\pytorch" -ForegroundColor Yellow >> cd E:\PyTorch_Build\pytorch >> } ⚠️ 错误: 需要切换到E:\PyTorch_Build\pytorch (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 2. CUDA工具链验证 (rtx5070_env) PS E:\PyTorch_Build\pytorch> $cudaStatus = @( >> "nvcc --version", >> "nvidia-smi", >> "where cudnn64_8.dll" >> ) (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> foreach ($cmd in $cudaStatus) { >> Write-Host "`n执行: $cmd" -ForegroundColor Magenta >> try { >> Invoke-Expression $cmd >> } >> catch { >> Write-Host "❌ 命令失败: $_" -ForegroundColor Red >> } >> } 执行: nvcc --version nvcc: NVIDIA (R) Cuda compiler driver Copyright (c) 2005-2025 NVIDIA Corporation Built on Wed_Jul_16_20:06:48_Pacific_Daylight_Time_2025 Cuda compilation tools, release 13.0, V13.0.48 Build cuda_13.0.r13.0/compiler.36260728_0 执行: nvidia-smi Wed Sep 3 22:04:47 2025 +-----------------------------------------------------------------------------------------+ | NVIDIA-SMI 580.97 Driver Version: 580.97 CUDA Version: 13.0 | +-----------------------------------------+------------------------+----------------------+ | GPU Name Driver-Model | Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap | Memory-Usage | GPU-Util Compute M. | | | | MIG M. | |=========================================+========================+======================| | 0 NVIDIA GeForce RTX 5070 WDDM | 00000000:01:00.0 On | N/A | | 0% 38C P3 22W / 250W | 1601MiB / 12227MiB | 1% Default | | | | N/A | +-----------------------------------------+------------------------+----------------------+ +-----------------------------------------------------------------------------------------+ | Processes: | | GPU GI CI PID Type Process name GPU Memory | | ID ID Usage | |=========================================================================================| | 0 N/A N/A 1540 C+G ...yb3d8bbwe\WindowsTerminal.exe N/A | | 0 N/A N/A 1916 C+G C:\Windows\System32\dwm.exe N/A | | 0 N/A N/A 4972 C+G ...em32\ApplicationFrameHost.exe N/A | | 0 N/A N/A 5036 C+G ...ef.win7x64\steamwebhelper.exe N/A | | 0 N/A N/A 5996 C+G ...8bbwe\PhoneExperienceHost.exe N/A | | 0 N/A N/A 6420 C+G ...ntrolPanel\SystemSettings.exe N/A | | 0 N/A N/A 8280 C+G C:\Windows\explorer.exe N/A | | 0 N/A N/A 8428 C+G ...indows\System32\ShellHost.exe N/A | | 0 N/A N/A 8616 C+G ..._cw5n1h2txyewy\SearchHost.exe N/A | | 0 N/A N/A 9212 C+G ...y\StartMenuExperienceHost.exe N/A | | 0 N/A N/A 10092 C+G ...0.3405.125\msedgewebview2.exe N/A | | 0 N/A N/A 12816 C+G ...5n1h2txyewy\TextInputHost.exe N/A | | 0 N/A N/A 13400 C+G ...crosoft\OneDrive\OneDrive.exe N/A | | 0 N/A N/A 14212 C+G ...t\Edge\Application\msedge.exe N/A | | 0 N/A N/A 14440 C+G ...acted\runtime\WeChatAppEx.exe N/A | | 0 N/A N/A 15156 C+G ...les\Tencent\Weixin\Weixin.exe N/A | | 0 N/A N/A 18312 C+G ...es\Microsoft VS Code\Code.exe N/A | +-----------------------------------------------------------------------------------------+ 执行: where cudnn64_8.dll (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 3. Python环境验证 (rtx5070_env) PS E:\PyTorch_Build\pytorch> Write-Host "`nPython环境状态:" -ForegroundColor Magenta Python环境状态: (rtx5070_env) PS E:\PyTorch_Build\pytorch> pip show torch | Select-String "Location" WARNING: Package(s) not found: torch (rtx5070_env) PS E:\PyTorch_Build\pytorch> python -c "import torch; print(f'PyTorch版本: {torch.__version__}')" Traceback (most recent call last): File "<string>", line 1, in <module> File "E:\PyTorch_Build\pytorch\torch\__init__.py", line 61, in <module> from torch.torch_version import __version__ as __version__ File "E:\PyTorch_Build\pytorch\torch\torch_version.py", line 5, in <module> from torch.version import __version__ as internal_version ModuleNotFoundError: No module named 'torch.version' (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 设置RTX 5070专属编译参数 (rtx5070_env) PS E:\PyTorch_Build\pytorch> $cmakeArgs = @( >> "-B build", >> "-G Ninja", >> "-DUSE_CUDA=ON", >> "-DUSE_CUDNN=ON", >> "-DCUDA_TOOLKIT_ROOT_DIR=`"C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v13.0`"", >> "-DCUDNN_ROOT_DIR=`"E:\Program Files\NVIDIA\CUNND\v9.12`"", >> "-DCUDA_ARCH_LIST=`"8.9`"", # RTX 5070架构 >> "-DTORCH_CUDA_ARCH_LIST=`"8.9`"", >> "-DCMAKE_BUILD_TYPE=Release", >> "-DUSE_NCCL=OFF", >> "-DUSE_MKLDNN=ON", >> "-DTORCH_CUDA_VERSION=11.8" # 兼容旧驱动 >> ) (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 启动配置过程 (rtx5070_env) PS E:\PyTorch_Build\pytorch> cmake ($cmakeArgs -join " ") CMake Error: Unable to (re)create the private pkgRedirects directory: E:/PyTorch_Build/pytorch/build -G Ninja -DUSE_CUDA=ON -DUSE_CUDNN=ON -DCUDA_TOOLKIT_ROOT_DIR="C:/Program Files/NVIDIA GPU Computing Toolkit/CUDA/v13.0" -DCUDNN_ROOT_DIR="E:/Program Files/NVIDIA/CUNND/v9.12" -DCUDA_ARCH_LIST="8.9" -DTORCH_CUDA_ARCH_LIST="8.9" -DCMAKE_BUILD_TYPE=Release -DUSE_NCCL=OFF -DUSE_MKLDNN=ON -DTORCH_CUDA_VERSION=11.8/CMakeFiles/pkgRedirects This may be caused by not having read/write access to the build directory. Try specifying a location with read/write access like: cmake -B build If using a CMake presets file, ensure that preset parameter 'binaryDir' expands to a writable directory. (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 设置并行编译（根据CPU核心数调整） (rtx5070_env) PS E:\PyTorch_Build\pytorch> $env:MAX_JOBS = 8 (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 启动编译并记录日志 (rtx5070_env) PS E:\PyTorch_Build\pytorch> $logFile = "build_$(Get-Date -Format 'yyyyMMdd_HHmmss').log" (rtx5070_env) PS E:\PyTorch_Build\pytorch> Start-Transcript -Path $logFile Transcript started, output file is build_20250903_220514.log (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> try { >> cmake --build build --config Release --parallel $env:MAX_JOBS >> pip install -v --no-build-isolation . >> } >> catch { >> Write-Host "🔥 编译失败！错误详情: $_" -ForegroundColor Red >> } Error: E:/PyTorch_Build/pytorch/build is not a directory Using pip 25.2 from E:\PyTorch_Build\pytorch\rtx5070_env\lib\site-packages\pip (python 3.10) Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple Processing e:\pytorch_build\pytorch Running command Preparing metadata (pyproject.toml) Building wheel torch-2.9.0a0+git2d31c3d E:\PyTorch_Build\pytorch\rtx5070_env\lib\site-packages\setuptools\config\_apply_pyprojecttoml.py:82: SetuptoolsDeprecationWarning: `project.license` as a TOML table is deprecated !! ******************************************************************************** Please use a simple string containing a SPDX expression for `project.license`. You can also use `project.license-files`. (Both options available on setuptools>=77.0.0). By 2026-Feb-18, you need to update your project and remove deprecated calls or your builds will no longer be supported. See https://packaging.python.org/en/latest/guides/writing-pyproject-toml/#license for details. ******************************************************************************** !! corresp(dist, value, root_dir) running dist_info creating C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info writing C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info\PKG-INFO writing dependency_links to C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info\dependency_links.txt writing entry points to C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info\entry_points.txt writing requirements to C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info\requires.txt writing top-level names to C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info\top_level.txt writing manifest file 'C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info\SOURCES.txt' reading manifest file 'C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info\SOURCES.txt' reading manifest template 'MANIFEST.in' warning: no files found matching 'BUILD' warning: no files found matching '*.BUILD' warning: no files found matching 'BUCK' warning: no files found matching '[Mm]akefile.*' warning: no files found matching '*.[Dd]ockerfile' warning: no files found matching '[Dd]ockerfile.*' warning: no previously-included files matching '*.o' found anywhere in distribution warning: no previously-included files matching '*.obj' found anywhere in distribution warning: no previously-included files matching '*.so' found anywhere in distribution warning: no previously-included files matching '*.a' found anywhere in distribution warning: no previously-included files matching '*.dylib' found anywhere in distribution no previously-included directories found matching '*\.git' warning: no previously-included files matching '*~' found anywhere in distribution warning: no previously-included files matching '*.swp' found anywhere in distribution adding license file 'LICENSE' adding license file 'NOTICE' writing manifest file 'C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info\SOURCES.txt' creating 'C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch-2.9.0a0+git2d31c3d.dist-info' Preparing metadata (pyproject.toml) ... done Collecting filelock (from torch==2.9.0a0+git2d31c3d) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/42/14/42b2651a2f46b022ccd948bca9f2d5af0fd8929c4eec235b8d6d844fbe67/filelock-3.19.1-py3-none-any.whl (15 kB) Requirement already satisfied: typing-extensions>=4.10.0 in e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages (from torch==2.9.0a0+git2d31c3d) (4.15.0) Collecting sympy>=1.13.3 (from torch==2.9.0a0+git2d31c3d) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/a2/09/77d55d46fd61b4a135c444fc97158ef34a095e5681d0a6c10b75bf356191/sympy-1.14.0-py3-none-any.whl (6.3 MB) Link requires a different Python (3.10.10 not in: '>=3.11'): https://pypi.tuna.tsinghua.edu.cn/packages/eb/8d/776adee7bbf76365fdd7f2552710282c79a4ead5d2a46408c9043a2b70ba/networkx-3.5-py3-none-any.whl (from https://pypi.tuna.tsinghua.edu.cn/simple/networkx/) (requires-python:>=3.11) Link requires a different Python (3.10.10 not in: '>=3.11'): https://pypi.tuna.tsinghua.edu.cn/packages/6c/4f/ccdb8ad3a38e583f214547fd2f7ff1fc160c43a75af88e6aec213404b96a/networkx-3.5.tar.gz (from https://pypi.tuna.tsinghua.edu.cn/simple/networkx/) (requires-python:>=3.11) Link requires a different Python (3.10.10 not in: '>=3.11'): https://pypi.tuna.tsinghua.edu.cn/packages/3f/a1/46c1b6e202e3109d2a035b21a7e5534c5bb233ee30752d7f16a0bd4c3989/networkx-3.5rc0-py3-none-any.whl (from https://pypi.tuna.tsinghua.edu.cn/simple/networkx/) (requires-python:>=3.11) Link requires a different Python (3.10.10 not in: '>=3.11'): https://pypi.tuna.tsinghua.edu.cn/packages/90/7e/0319606a20ced20730806b9f7fe91d8a92f7da63d76a5c388f87d3f7d294/networkx-3.5rc0.tar.gz (from https://pypi.tuna.tsinghua.edu.cn/simple/networkx/) (requires-python:>=3.11) Collecting networkx>=2.5.1 (from torch==2.9.0a0+git2d31c3d) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/b9/54/dd730b32ea14ea797530a4479b2ed46a6fb250f682a9cfb997e968bf0261/networkx-3.4.2-py3-none-any.whl (1.7 MB) Collecting jinja2 (from torch==2.9.0a0+git2d31c3d) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/62/a1/3d680cbfd5f4b8f15abc1d571870c5fc3e594bb582bc3b64ea099db13e56/jinja2-3.1.6-py3-none-any.whl (134 kB) Collecting fsspec>=0.8.5 (from torch==2.9.0a0+git2d31c3d) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/47/71/70db47e4f6ce3e5c37a607355f80da8860a33226be640226ac52cb05ef2e/fsspec-2025.9.0-py3-none-any.whl (199 kB) Collecting mpmath<1.4,>=1.1.0 (from sympy>=1.13.3->torch==2.9.0a0+git2d31c3d) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/43/e3/7d92a15f894aa0c9c4b49b8ee9ac9850d6e63b03c9c32c0367a13ae62209/mpmath-1.3.0-py3-none-any.whl (536 kB) Collecting MarkupSafe>=2.0 (from jinja2->torch==2.9.0a0+git2d31c3d) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/44/06/e7175d06dd6e9172d4a69a72592cb3f7a996a9c396eee29082826449bbc3/MarkupSafe-3.0.2-cp310-cp310-win_amd64.whl (15 kB) Building wheels for collected packages: torch Running command Building wheel for torch (pyproject.toml) Building wheel torch-2.9.0a0+git2d31c3d -- Building version 2.9.0a0+git2d31c3d E:\PyTorch_Build\pytorch\rtx5070_env\lib\site-packages\setuptools\_distutils\_msvccompiler.py:12: UserWarning: _get_vc_env is private; find an alternative (pypa/distutils#340) warnings.warn( Cloning into 'nccl'... Note: switching to '3ea7eedf3b9b94f1d9f99f4e55536dfcbd23c1ca'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false cmake -GNinja -DBUILD_PYTHON=True -DBUILD_TEST=True -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=E:\PyTorch_Build\pytorch\torch -DCMAKE_PREFIX_PATH=E:\PyTorch_Build\pytorch\rtx5070_env\Lib\site-packages -DCUDNN_INCLUDE_DIR=E:\Program Files\NVIDIA\CUNND\v9.12\include\12.9 -DCUDNN_LIBRARY=E:\Program Files\NVIDIA\CUNND\v9.12\lib\12.9\x64 -DCUDNN_ROOT=E:\Program Files\NVIDIA\CUNND\v9.12 -DPython_EXECUTABLE=E:\PyTorch_Build\pytorch\rtx5070_env\Scripts\python.exe -DPython_NumPy_INCLUDE_DIR=E:\PyTorch_Build\pytorch\rtx5070_env\lib\site-packages\numpy\_core\include -DTORCH_BUILD_VERSION=2.9.0a0+git2d31c3d -DTORCH_CUDA_ARCH_LIST=8.9 -DUSE_NUMPY=True -DUSE_OPENBLAS=1 E:\PyTorch_Build\pytorch CMake Deprecation Warning at CMakeLists.txt:9 (cmake_policy): The OLD behavior for policy CMP0126 will be removed from a future version of CMake. The cmake-policies(7) manual explains that the OLD behaviors of all policies are deprecated and that a policy should be set to OLD only under specific short-term circumstances. Projects should be ported to the NEW behavior and not rely on setting a policy to OLD. -- The CXX compiler identification is MSVC 19.44.35215.0 -- The C compiler identification is MSVC 19.44.35215.0 -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: C:/Program Files (x86)/Microsoft Visual Studio/2022/BuildTools/VC/Tools/MSVC/14.44.35207/bin/Hostx64/x64/cl.exe - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: C:/Program Files (x86)/Microsoft Visual Studio/2022/BuildTools/VC/Tools/MSVC/14.44.35207/bin/Hostx64/x64/cl.exe - skipped -- Detecting C compile features -- Detecting C compile features - done -- Not forcing any particular BLAS to be found CMake Warning at CMakeLists.txt:421 (message): TensorPipe cannot be used on Windows. Set it to OFF CMake Warning at CMakeLists.txt:423 (message): KleidiAI cannot be used on Windows. Set it to OFF CMake Warning at CMakeLists.txt:435 (message): Libuv is not installed in current conda env. Set USE_DISTRIBUTED to OFF. Please run command 'conda install -c conda-forge libuv=1.39' to install libuv. -- Performing Test C_HAS_AVX_1 -- Performing Test C_HAS_AVX_1 - Success -- Performing Test C_HAS_AVX2_1 -- Performing Test C_HAS_AVX2_1 - Success -- Performing Test C_HAS_AVX512_1 -- Performing Test C_HAS_AVX512_1 - Success -- Performing Test CXX_HAS_AVX_1 -- Performing Test CXX_HAS_AVX_1 - Success -- Performing Test CXX_HAS_AVX2_1 -- Performing Test CXX_HAS_AVX2_1 - Success -- Performing Test CXX_HAS_AVX512_1 -- Performing Test CXX_HAS_AVX512_1 - Success -- Current compiler supports avx2 extension. Will build perfkernels. -- Performing Test COMPILER_SUPPORTS_HIDDEN_VISIBILITY -- Performing Test COMPILER_SUPPORTS_HIDDEN_VISIBILITY - Failed -- Performing Test COMPILER_SUPPORTS_HIDDEN_INLINE_VISIBILITY -- Performing Test COMPILER_SUPPORTS_HIDDEN_INLINE_VISIBILITY - Failed -- Could not find hardware support for NEON on this machine. -- No OMAP3 processor on this machine. -- No OMAP4 processor on this machine. -- Compiler does not support SVE extension. Will not build perfkernels. CMake Warning at CMakeLists.txt:841 (message): x64 operating system is required for FBGEMM. Not compiling with FBGEMM. Turn this warning off by USE_FBGEMM=OFF. -- Performing Test HAS/UTF_8 -- Performing Test HAS/UTF_8 - Success -- Found CUDA: E:/Program Files/NVIDIA GPU Computing Toolkit/CUDA/v13.0 (found version "13.0") -- The CUDA compiler identification is NVIDIA 13.0.48 with host compiler MSVC 19.44.35215.0 -- Detecting CUDA compiler ABI info -- Detecting CUDA compiler ABI info - done -- Check for working CUDA compiler: E:/Program Files/NVIDIA GPU Computing Toolkit/CUDA/v13.0/bin/nvcc.exe - skipped -- Detecting CUDA compile features -- Detecting CUDA compile features - done -- Found CUDAToolkit: E:/Program Files/NVIDIA GPU Computing Toolkit/CUDA/v13.0/include (found version "13.0.48") -- PyTorch: CUDA detected: 13.0 -- PyTorch: CUDA nvcc is: E:/Program Files/NVIDIA GPU Computing Toolkit/CUDA/v13.0/bin/nvcc.exe -- PyTorch: CUDA toolkit directory: E:/Program Files/NVIDIA GPU Computing Toolkit/CUDA/v13.0 -- PyTorch: Header version is: 13.0 -- Found Python: E:\PyTorch_Build\pytorch\rtx5070_env\Scripts\python.exe (found version "3.10.10") found components: Interpreter CMake Warning at cmake/public/cuda.cmake:140 (message): Failed to compute shorthash for libnvrtc.so Call Stack (most recent call first): cmake/Dependencies.cmake:44 (include) CMakeLists.txt:869 (include) -- Found CUDNN: E:/Program Files/NVIDIA/CUNND/v9.12/lib/13.0/x64/cudnn.lib -- Could NOT find CUSPARSELT (missing: CUSPARSELT_LIBRARY_PATH CUSPARSELT_INCLUDE_PATH) CMake Warning at cmake/public/cuda.cmake:226 (message): Cannot find cuSPARSELt library. Turning the option off Call Stack (most recent call first): cmake/Dependencies.cmake:44 (include) CMakeLists.txt:869 (include) -- Could NOT find CUDSS (missing: CUDSS_LIBRARY_PATH CUDSS_INCLUDE_PATH) CMake Warning at cmake/public/cuda.cmake:242 (message): Cannot find CUDSS library. Turning the option off Call Stack (most recent call first): cmake/Dependencies.cmake:44 (include) CMakeLists.txt:869 (include) -- USE_CUFILE is set to 0. Compiling without cuFile support CMake Warning at cmake/public/cuda.cmake:317 (message): pytorch is not compatible with `CMAKE_CUDA_ARCHITECTURES` and will ignore its value. Please configure `TORCH_CUDA_ARCH_LIST` instead. Call Stack (most recent call first): cmake/Dependencies.cmake:44 (include) CMakeLists.txt:869 (include) -- Added CUDA NVCC flags for: -gencode;arch=compute_89,code=sm_89 CMake Warning at cmake/Dependencies.cmake:95 (message): Not compiling with XPU. Could NOT find SYCL. Suppress this warning with -DUSE_XPU=OFF. Call Stack (most recent call first): CMakeLists.txt:869 (include) -- Building using own protobuf under third_party per request. -- Use custom protobuf build. CMake Warning at cmake/ProtoBuf.cmake:37 (message): Ancient protobuf forces CMake compatibility Call Stack (most recent call first): cmake/ProtoBuf.cmake:87 (custom_protobuf_find) cmake/Dependencies.cmake:107 (include) CMakeLists.txt:869 (include) CMake Deprecation Warning at third_party/protobuf/cmake/CMakeLists.txt:2 (cmake_minimum_required): Compatibility with CMake < 3.10 will be removed from a future version of CMake. Update the VERSION argument <min> value. Or, use the <min>...<max> syntax to tell CMake that the project requires at least <min> but has been updated to work with policies introduced by <max> or earlier. -- -- 3.13.0.0 -- Performing Test CMAKE_HAVE_LIBC_PTHREAD -- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Failed -- Looking for pthread_create in pthreads -- Looking for pthread_create in pthreads - not found -- Looking for pthread_create in pthread -- Looking for pthread_create in pthread - not found -- Found Threads: TRUE -- Caffe2 protobuf include directory: $<BUILD_INTERFACE:E:/PyTorch_Build/pytorch/third_party/protobuf/src>$<INSTALL_INTERFACE:include> -- Trying to find preferred BLAS backend of choice: MKL -- MKL_THREADING = OMP -- Looking for sys/types.h -- Looking for sys/types.h - found -- Looking for stdint.h -- Looking for stdint.h - found -- Looking for stddef.h -- Looking for stddef.h - found -- Check size of void* -- Check size of void* - done -- MKL_THREADING = OMP CMake Warning at cmake/Dependencies.cmake:213 (message): MKL could not be found. Defaulting to Eigen Call Stack (most recent call first): CMakeLists.txt:869 (include) CMake Warning at cmake/Dependencies.cmake:279 (message): Preferred BLAS (MKL) cannot be found, now searching for a general BLAS library Call Stack (most recent call first): CMakeLists.txt:869 (include) -- MKL_THREADING = OMP -- Checking for [mkl_intel_lp64 - mkl_intel_thread - mkl_core - libiomp5md] -- Library mkl_intel_lp64: not found -- Checking for [mkl_intel - mkl_intel_thread - mkl_core - libiomp5md] -- Library mkl_intel: not found -- Checking for [mkl_intel_lp64 - mkl_intel_thread - mkl_core] -- Library mkl_intel_lp64: not found -- Checking for [mkl_intel - mkl_intel_thread - mkl_core] -- Library mkl_intel: not found -- Checking for [mkl_intel_lp64 - mkl_sequential - mkl_core] -- Library mkl_intel_lp64: not found -- Checking for [mkl_intel - mkl_sequential - mkl_core] -- Library mkl_intel: not found -- Checking for [mkl_intel_lp64 - mkl_core - libiomp5md - pthread] -- Library mkl_intel_lp64: not found -- Checking for [mkl_intel - mkl_core - libiomp5md - pthread] -- Library mkl_intel: not found -- Checking for [mkl_intel_lp64 - mkl_core - pthread] -- Library mkl_intel_lp64: not found -- Checking for [mkl_intel - mkl_core - pthread] -- Library mkl_intel: not found -- Checking for [mkl - guide - pthread - m] -- Library mkl: not found -- MKL library not found -- Checking for [blis] -- Library blis: BLAS_blis_LIBRARY-NOTFOUND -- Checking for [Accelerate] -- Library Accelerate: BLAS_Accelerate_LIBRARY-NOTFOUND -- Checking for [vecLib] -- Library vecLib: BLAS_vecLib_LIBRARY-NOTFOUND -- Checking for [flexiblas] -- Library flexiblas: BLAS_flexiblas_LIBRARY-NOTFOUND -- Checking for [openblas] -- Library openblas: BLAS_openblas_LIBRARY-NOTFOUND -- Checking for [openblas - pthread - m] -- Library openblas: BLAS_openblas_LIBRARY-NOTFOUND -- Checking for [openblas - pthread - m - gomp] -- Library openblas: BLAS_openblas_LIBRARY-NOTFOUND -- Checking for [libopenblas] -- Library libopenblas: BLAS_libopenblas_LIBRARY-NOTFOUND -- Checking for [goto2 - gfortran] -- Library goto2: BLAS_goto2_LIBRARY-NOTFOUND -- Checking for [goto2 - gfortran - pthread] -- Library goto2: BLAS_goto2_LIBRARY-NOTFOUND -- Checking for [acml - gfortran] -- Library acml: BLAS_acml_LIBRARY-NOTFOUND -- Checking for [blis] -- Library blis: BLAS_blis_LIBRARY-NOTFOUND -- Could NOT find Atlas (missing: Atlas_CBLAS_INCLUDE_DIR Atlas_CLAPACK_INCLUDE_DIR Atlas_CBLAS_LIBRARY Atlas_BLAS_LIBRARY Atlas_LAPACK_LIBRARY) -- Checking for [ptf77blas - atlas - gfortran] -- Library ptf77blas: BLAS_ptf77blas_LIBRARY-NOTFOUND -- Checking for [] -- Looking for sgemm_ -- Looking for sgemm_ - not found -- Cannot find a library with BLAS API. Not using BLAS. -- Using pocketfft in directory: E:/PyTorch_Build/pytorch/third_party/pocketfft/ CMake Deprecation Warning at third_party/pthreadpool/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): Compatibility with CMake < 3.10 will be removed from a future version of CMake. Update the VERSION argument <min> value. Or, use the <min>...<max> syntax to tell CMake that the project requires at least <min> but has been updated to work with policies introduced by <max> or earlier. CMake Deprecation Warning at third_party/FXdiv/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): Compatibility with CMake < 3.10 will be removed from a future version of CMake. Update the VERSION argument <min> value. Or, use the <min>...<max> syntax to tell CMake that the project requires at least <min> but has been updated to work with policies introduced by <max> or earlier. CMake Deprecation Warning at third_party/cpuinfo/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): Compatibility with CMake < 3.10 will be removed from a future version of CMake. Update the VERSION argument <min> value. Or, use the <min>...<max> syntax to tell CMake that the project requires at least <min> but has been updated to work with policies introduced by <max> or earlier. -- The ASM compiler identification is MSVC CMake Warning (dev) at rtx5070_env/Lib/site-packages/cmake/data/share/cmake-4.1/Modules/CMakeDetermineASMCompiler.cmake:234 (message): Policy CMP194 is not set: MSVC is not an assembler for language ASM. Run "cmake --help-policy CMP194" for policy details. Use the cmake_policy command to set the policy and suppress this warning. Call Stack (most recent call first): third_party/XNNPACK/CMakeLists.txt:18 (PROJECT) This warning is for project developers. Use -Wno-dev to suppress it. -- Found assembler: C:/Program Files (x86)/Microsoft Visual Studio/2022/BuildTools/VC/Tools/MSVC/14.44.35207/bin/Hostx64/x64/cl.exe -- Building for XNNPACK_TARGET_PROCESSOR: x86_64 -- Generating microkernels.cmake
最新发布
09-04
2. CMake配置失败：`CMake Error: Unable to (re)create the private pkgRedirects directory` 3. 编译过程中出现错误：`Error: E:/PyTorch_Build/pytorch/build is not a directory` 4. 编译时检测到多个警告，特别...
Centos7.9上安装Oracle 11.2.0.3 RAC 2节点(ASMlib管理asm磁盘)
qq961573863的博客
05-26 1176
ASMLib 由以下组件组成开源 (GPL) 内核模块包：kmod-oracleasm开源 (GPL) 实用程序包：oracleasm-support闭源（专有）库包：oracleasmlib如果是Oracle Linux系统，并且是使用了带uek内核的方式启动的（uname -a确认），则只需要安装"oracleasm-support"和“oracleasmlib”即可。
FAILED (Write to device failed (no link))
qq_38449792的博客
04-10 6525
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "osvc" /t REG_BINARY /d "0000" /f reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipContainerIdQuery" /t REG_BINARY /d "01000.
ReactNative Could not install the app on the device
02-16 224
我们从github下载的ReactNative(以下简称RN)经常会出现这个错误： Could not install the app on the device, read the error above for details. Make sure you have anAnd...
React Native运行问题Could not install the app on the device
JOE
07-25 3231
异常信息： Could not install the app on the device, read the error above for details. Make sure you have an Android emulator running or a device connected and have set up your Android development enviro...
Could not install the app on the device, read the error above for details. Make sure you have an And...
weixin_30576827的博客
04-09 337
Administrator@DESKTOP-EHCTIOR MINGW64 /d/react-native-eyepetizer (master) $ react-native run-android Starting JS server... Building and installing the app on the device (cd android && gradlew....
【React-native】安卓运行报错 Could not install the app on the device, read the error above for details.
冯一朔 - 不想当CTO的程序员不是一个好哲学家
12-19 4120
RN在IOS运行一切正常，准备去Android端测试发现报错，但是我设备启着的，于是乎根据提示./gradlew installDebug，却说我Permission denied 错误截图： 可能原因一 gradlew权限不足导致react-native run-android失败 解决方案 执行如下命令： chmod +x gradlew 可能原因二 安卓运行后...
Could not install the app on the device, read the error above for details. Make sure you have an And
热门推荐
qq_30613075的博客
12-23 1万+
React Native 报错如下 Could not install the app on the device, read the error above for details. Make sure you have an Android emulator running or a device connected and have set up your Android develo
Installation failed since the device possibly has stale dexed jars that ...解决办法
松鼠敲。。。
09-05 2009
写完代码运行，出现了程序安装失败的对话框： 解决办法： AndroidStudio-> Build -> Clean Projects  然后等下面任务完成后，重新运行就可以了。
android studio 真机调试连接时候好好的，运行安装就掉线 Session 'app': Error Installing APKs
qq_33495943的博客
03-08 3262
1 运行跑起来，准备安装时候，掉线，Session 'app': Error Installing APKs2 有时候报提示：   Installation failed because the device "huawei-ath_tl00h-F3D7N15B04017165" disconnected3  有时候报 ：  远程主机强迫关闭了一个现有的连接。java.io.IOException...
Installation did not succeed. The application could not be installed: INSTALL_FAILED_OLDER_SDK List...
05-23
This error message occurs when you are trying to install an application on a device with an Android version that is lower than the minimum required version specified in the app's manifest file. To solve this issue, you can either update the Android version of your device to meet the minimum requirement or build the app with a lower minimum SDK version. To change the minimum SDK version in your app's manifest file, open the `AndroidManifest.xml` file and look for the `minSdkVersion` attribute under the `uses-sdk` tag. Change the value to a lower version number and rebuild the app. Note that lowering the minimum SDK version may cause some features to not work on older devices and could affect the overall user experience.
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
表情包 代码片
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值