STM32中 warning: #61-D: integer operation result is out of range

最新推荐文章于 2024-06-22 14:18:57 发布
最新推荐文章于 2024-06-22 14:18:57 发布
阅读量7.3k 收藏 7
点赞数 12
CC 4.0 BY-SA版权
分类专栏： STM32学习笔记 文章标签： 编译器 32位 I2C stm32
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.youkuaiyun.com/dddxxxx/article/details/53188658
本文解析了在进行左移运算时可能出现的符号位改写问题及编译警告，并提供了使用无符号整数类型来避免这类问题的方法。

摘要生成于 C知道 ，由 DeepSeek-R1 满血版支持， 前往体验 >

由于编译器默认signed int即32位有符号整数类型,而1<<31实际为0x80000000,

这样就有可能改写了符号位(最高位)

依此类推,(2<<30),(3<<29)...等都会出现编译警告问题.

解决办法为: ((unsigned int)1<<31),((unsigned int)2<<30),...
warning: #61-D: integer operation result is out of range
零点开发的博客
10-29 1万+
integer operation result is out of range //Set GPIO Direction #define DHT22_IO_IN() {GPIOA-&gt;CRL &amp;= 0X0FFFFFFF;GPIOA-&gt;CRL |= (8 &lt;&lt; 4*7);} #define DHT22_IO_OUT() {GPIOA-&gt;CRL &amp;=...
keil for stm32中出现的警告" integer operation result is out of ran"
daa20的专栏
09-03 5596
GPIOA->CRH &= 0X0F0FFFFF;//PA13,15设置成输入 GPIOA->CRH |= 0X80800000;
warning: #61-D: integer operation result is out of range
lbd321的博客
06-19 9626
STM32程序编译出现以下问题的解决方法： //IO方向设置  #define SDA_IN()  {GPIOC->CRH&=0X0FFFFFFF;GPIOC->CRH|=8 #define SDA_OUT() {GPIOC->CRH&=0X0FFFFFFF;GPIOC->CRH|=3 结果编译时出现错误  compiling myiic.c...  ..\HARDWARE\IIC\m
编写单片机IO口驱动，提示warning: #61-D: integer operation result is out of range
愚翁的专栏
09-09 1851
1 宏定义如下： #define nGPIO_MODE_HSET(m,p,n) SYS->GP##p##_MFPH =(SYS->GP##p##_MFPH & (~(1<<(4*(n-8))))); P##p##->MODE = (P##p##->MODE &(~( 3<<(n<<1))) | ( m<<(n<<1))) 2 函数调用 nGPIO_MODE_HSET(OUT_GPIO, ...
integer operation result is out of range
移动开发记录
06-07 472
integer operation result is out of range 在编写测试程序的过程中，有如下定义： #define UART1_EN (1&lt;&lt;31) 编译后编译器报错： integer operation result is out of range (61-D)，经查资料是由于溢出所致，宏定义默认常量是有符号型，当左移31位时，常数就变成负数，编译器...
..\FWLib\gpio.c(103): warning: #61-D: integer operation result is out of range
05-10
在GPIO配置代码中，`integer operation result is out of range`警告通常由**位运算操作数超出变量类型范围**导致。以下是分步解决方案： --- #### 1. 警告原因分析 该警告常见于以下场景： - **位偏移量超过左操作...
stm32keil报错..\Middlewares\smshostlib\Include\SmsCtrlLib.h(87): warning: #66-D: enumeration value is out of "int" range
最新发布
07-25
- [^3]: Keil警告"integer operation result is out of range"，涉及GPIO操作。 - [^4]: 移植mavlink时，添加--diag_suppress=66来忽略警告。 用户的核心问题：STM32 Keil编译警告"enumeration value is out of int...
Build target &#39;Target 1&#39; compiling main.c... compiling dht11.c... compiling tft_gfx.c... tft_gfx.c(16): warning: #61-D: integer operation result is out of range GPIOA->CRL &= ~(0xFFF << 20); // ??PA5, PA6, PA7?? tft_gfx.c(28): warning: #223-D: function "TFT_SetAddress" declared implicitly TFT_SetAddress(0, 0, 239, 319); // ??320x240??? tft_gfx.c(30): error: #20: identifier "TFT_DC_PIN" is undefined GPIOA->BSRR = (1 << TFT_DC_PIN); // DC=1(??) tft_gfx.c(31): error: #20: identifier "TFT_CS_PIN" is undefined GPIOA->BRR = (1 << TFT_CS_PIN); // CS=? tft_gfx.c(35): warning: #223-D: function "SPI_Send" declared implicitly SPI_Send(color >> 8); // ??? tft_gfx.c(46): warning: #177-D: variable "char_height" was declared but never referenced uint8_t char_height = font->height; // ???????? tft_gfx.c(73): warning: #223-D: function "TFT_SetAddress" declared implicitly TFT_SetAddress(x, y, x, y); tft_gfx.c(74): warning: #223-D: function "TFT_WriteData" declared implicitly TFT_WriteData(color >> 8); tft_gfx.c(82): warning: #223-D: function "TFT_SetAddress" declared implicitly TFT_SetAddress(x, y, x + w - 1, y + h - 1); tft_gfx.c(84): error: #20: identifier "TFT_DC_PIN" is undefined GPIOA->BSRR = (1 << TFT_DC_PIN); // DC=1(??) tft_gfx.c(85): error: #20: identifier "TFT_CS_PIN" is undefined GPIOA->BRR = (1 << TFT_CS_PIN); // CS=? tft_gfx.c(89): warning: #223-D: function "SPI_Send" declared implicitly SPI_Send(color >> 8); // ??? tft_gfx.c(94): warning: #1-D: last line of file ends without a newline } tft_gfx.c: 9 warnings, 4 errors compiling fonts.c... fonts.c(37): error: #20: identifier "FONT_SIZE_SMALL" is undefined case FONT_SIZE_SMALL: return &Font_7x10; fonts.c(38): error: #20: identifier "FONT_SIZE_MEDIUM" is undefined case FONT_SIZE_MEDIUM: return &Font_11x18; fonts.c(39): error: #20: identifier "FONT_SIZE_LARGE" is undefined case FONT_SIZE_LARGE: return &Font_16x26; fonts.c: 0 warnings, 3 errors ".\Objects\01.axf" - 7 Error(s), 9 Warning(s). Target not created. Build Time Elapsed: 00:00:01
06-27
d)确保fonts.h中定义了字体大小枚举（FONT_SIZE_SMALL等）。e)修复整数操作警告，使用适当的类型和强制转换。详细修复如下：</think>### 解决剩余编译错误：详细修复方案 根据最新的错误信息，我将提供完整的修复...
Build target &#39;Target 1&#39; compiling main.c... dht11.h(10): error: #20: identifier "uint8_t" is undefined uint8_t DHT11_Read(float *temp, float *humid); main.c(8): error: #20: identifier "RCC" is undefined RCC->CR |= RCC_CR_HSEON; main.c(8): error: #20: identifier "RCC_CR_HSEON" is undefined RCC->CR |= RCC_CR_HSEON; main.c(9): error: #20: identifier "RCC_CR_HSERDY" is undefined while (!(RCC->CR & RCC_CR_HSERDY)); main.c(12): error: #20: identifier "RCC_CFGR_PLLMULL9" is undefined RCC->CFGR |= RCC_CFGR_PLLMULL9 | RCC_CFGR_PLLSRC; main.c(12): error: #20: identifier "RCC_CFGR_PLLSRC" is undefined RCC->CFGR |= RCC_CFGR_PLLMULL9 | RCC_CFGR_PLLSRC; main.c(15): error: #20: identifier "RCC_CR_PLLON" is undefined RCC->CR |= RCC_CR_PLLON; main.c(16): error: #20: identifier "RCC_CR_PLLRDY" is undefined while (!(RCC->CR & RCC_CR_PLLRDY)); main.c(19): error: #20: identifier "RCC_CFGR_SW_PLL" is undefined RCC->CFGR |= RCC_CFGR_SW_PLL; main.c(20): error: #20: identifier "RCC_CFGR_SWS" is undefined while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_PLL); main.c(20): error: #20: identifier "RCC_CFGR_SWS_PLL" is undefined while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_PLL); main.c(23): error: #20: identifier "RCC_CFGR_PPRE1_DIV2" is undefined RCC->CFGR |= RCC_CFGR_PPRE1_DIV2 | RCC_CFGR_PPRE2_DIV1; main.c(23): error: #20: identifier "RCC_CFGR_PPRE2_DIV1" is undefined RCC->CFGR |= RCC_CFGR_PPRE1_DIV2 | RCC_CFGR_PPRE2_DIV1; main.c(29): error: #20: identifier "RCC" is undefined RCC->APB2ENR |= RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | RCC_APB2ENR_IOPCEN; main.c(29): error: #20: identifier "RCC_APB2ENR_IOPAEN" is undefined RCC->APB2ENR |= RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | RCC_APB2ENR_IOPCEN; main.c(29): error: #20: identifier "RCC_APB2ENR_IOPBEN" is undefined RCC->APB2ENR |= RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | RCC_APB2ENR_IOPCEN; main.c(29): error: #20: identifier "RCC_APB2ENR_IOPCEN" is undefined RCC->APB2ENR |= RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | RCC_APB2ENR_IOPCEN; main.c(32): error: #20: identifier "GPIOA" is undefined GPIOA->CRL &= ~(0x0F << (BUTTON_PIN * 4)); // ???? main.c(36): error: #20: identifier "GPIOC" is undefined GPIOC->CRH &= ~(0xFF << 0); // ???? main.c(40): error: #20: identifier "GPIOB" is undefined GPIOB->CRH &= ~(0x0F << 0); main.c(48): warning: #223-D: function "__NOP" declared implicitly __NOP(); main.c(54): error: #20: identifier "GPIOB" is undefined GPIOB->BSRR = (1 << BUZZER_PIN); // ?? main.c(63): error: #20: identifier "GPIOC" is undefined GPIOC->BSRR = (1 << FAN_PIN1); // ?? main.c(66): error: #20: identifier "GPIOC" is undefined GPIOC->BRR = (1 << FAN_PIN1); // ?? main.c(70): error: #20: identifier "GPIOC" is undefined GPIOC->BRR = (1 << FAN_PIN1) | (1 << FAN_PIN2); // ?? main.c(82): error: #268: declaration may not appear after executable statement in block uint8_t fan_state = 0; main.c(83): error: #268: declaration may not appear after executable statement in block uint8_t fan_direction = 1; // 1=??, 0=?? main.c(97): warning: #223-D: function "sprintf" declared implicitly sprintf(buffer, "Temp: %.1fC", temp); main.c(113): error: #20: identifier "GPIOA" is undefined if ((GPIOA->IDR & (1 << BUTTON_PIN)) == 0) { // ????(???) main.c: 2 warnings, 27 errors compiling dht11.c... dht11.h(10): error: #20: identifier "uint8_t" is undefined uint8_t DHT11_Read(float *temp, float *humid); dht11.c(7): error: #20: identifier "GPIOA" is undefined GPIOA->CRL &= ~(0x0F << (4 * DHT11_PIN)); // ???? dht11.c(15): error: #20: identifier "uint8_t" is undefined uint8_t DHT11_Read(float *temp, float *humid) { dht11.c(16): error: #20: identifier "uint8_t" is undefined uint8_t data[5] = {0}; dht11.c(17): error: #20: identifier "uint8_t" is undefined uint8_t i, j; dht11.c(20): error: #20: identifier "GPIOA" is undefined GPIOA->CRL &= ~(0x0F << (4 * DHT11_PIN)); // ???? dht11.c(22): warning: #223-D: function "Delay_ms" declared implicitly Delay_ms(18); dht11.c(41): error: #268: declaration may not appear after executable statement in block uint32_t count = 0; dht11.c(41): error: #20: identifier "uint32_t" is undefined uint32_t count = 0; dht11.c: 1 warning, 8 errors compiling tft_gfx.c... tft_gfx.c(11): error: #20: identifier "RCC" is undefined RCC->APB2ENR |= RCC_APB2ENR_SPI1EN; tft_gfx.c(11): error: #20: identifier "RCC_APB2ENR_SPI1EN" is undefined RCC->APB2ENR |= RCC_APB2ENR_SPI1EN; tft_gfx.c(14): error: #20: identifier "GPIOA" is undefined GPIOA->CRL &= ~(0xFFF << 20); // ??PA5, PA6, PA7?? tft_gfx.c(14): warning: #61-D: integer operation result is out of range GPIOA->CRL &= ~(0xFFF << 20); // ??PA5, PA6, PA7?? tft_gfx.c(18): error: #20: identifier "SPI1" is undefined SPI1->CR1 = SPI_CR1_MSTR | SPI_CR1_SPE | SPI_CR1_SSM | SPI_CR1_SSI; tft_gfx.c(18): error: #20: identifier "SPI_CR1_MSTR" is undefined SPI1->CR1 = SPI_CR1_MSTR | SPI_CR1_SPE | SPI_CR1_SSM | SPI_CR1_SSI; tft_gfx.c(18): error: #20: identifier "SPI_CR1_SPE" is undefined SPI1->CR1 = SPI_CR1_MSTR | SPI_CR1_SPE | SPI_CR1_SSM | SPI_CR1_SSI; tft_gfx.c(18): error: #20: identifier "SPI_CR1_SSM" is undefined SPI1->CR1 = SPI_CR1_MSTR | SPI_CR1_SPE | SPI_CR1_SSM | SPI_CR1_SSI; tft_gfx.c(18): error: #20: identifier "SPI_CR1_SSI" is undefined SPI1->CR1 = SPI_CR1_MSTR | SPI_CR1_SPE | SPI_CR1_SSM | SPI_CR1_SSI; tft_gfx.c(19): error: #20: identifier "SPI_CR1_BR_0" is undefined SPI1->CR1 |= SPI_CR1_BR_0; // 36MHz/4 = 9MHz tft_gfx.c(25): error: #20: identifier "GPIOA" is undefined GPIOA->CRL &= ~(0xFF << (4 * TFT_CS_PIN)); tft_gfx.c(33): warning: #223-D: function "Delay_ms" declared implicitly Delay_ms(100); tft_gfx.c(43): error: #20: identifier "SPI1" is undefined while (!(SPI1->SR & SPI_SR_TXE)); // ???????? tft_gfx.c(43): error: #20: identifier "SPI_SR_TXE" is undefined while (!(SPI1->SR & SPI_SR_TXE)); // ???????? tft_gfx.c(45): error: #20: identifier "SPI_SR_BSY" is undefined while (SPI1->SR & SPI_SR_BSY); // ?????? tft_gfx.c(50): error: #20: identifier "GPIOA" is undefined GPIOA->BRR = (1 << TFT_DC_PIN); // DC=0(??) tft_gfx.c(58): error: #20: identifier "GPIOA" is undefined GPIOA->BSRR = (1 << TFT_DC_PIN); // DC=1(??) tft_gfx.c(85): error: #20: identifier "GPIOA" is undefined GPIOA->BSRR = (1 << TFT_DC_PIN); // DC=1(??) tft_gfx.c(88): error: #254: type name is not allowed for (uint32_t i = 0; i < 320 * 240; i++) { tft_gfx.c(88): error: #65: expected a ";" for (uint32_t i = 0; i < 320 * 240; i++) { tft_gfx.c(88): error: #20: identifier "i" is undefined for (uint32_t i = 0; i < 320 * 240; i++) { tft_gfx.c(103): warning: #223-D: function "TFT_DrawChar" declared implicitly TFT_DrawChar(x, y, *str, font, color); tft_gfx.c(100): warning: #177-D: variable "char_height" was declared but never referenced uint8_t char_height = font->height; tft_gfx.c(110): error: #159: declaration is incompatible with previous "TFT_DrawChar" (declared at line 103) void TFT_DrawChar(uint16_t x, uint16_t y, char c, FontDef *font, uint16_t color) { tft_gfx.c(114): error: #254: type name is not allowed for (uint8_t row = 0; row < font->height; row++) { tft_gfx.c(114): error: #65: expected a ";" for (uint8_t row = 0; row < font->height; row++) { tft_gfx.c(114): error: #20: identifier "row" is undefined for (uint8_t row = 0; row < font->height; row++) { tft_gfx.c(116): error: #254: type name is not allowed for (uint8_t col = 0; col < font->width; col++) { tft_gfx.c(116): error: #65: expected a ";" for (uint8_t col = 0; col < font->width; col++) { tft_gfx.c(116): error: #20: identifier "col" is undefined for (uint8_t col = 0; col < font->width; col++) { tft_gfx.c(118): warning: #223-D: function "TFT_DrawPixel" declared implicitly TFT_DrawPixel(x + col, y + row, color); tft_gfx.c(125): error: #159: declaration is incompatible with previous "TFT_DrawPixel" (declared at line 118) void TFT_DrawPixel(uint16_t x, uint16_t y, uint16_t color) { tft_gfx.c(135): error: #20: identifier "GPIOA" is undefined GPIOA->BSRR = (1 << TFT_DC_PIN); // DC=1(??) tft_gfx.c(138): error: #254: type name is not allowed for (uint32_t i = 0; i < w * h; i++) { tft_gfx.c(138): error: #65: expected a ";" for (uint32_t i = 0; i < w * h; i++) { tft_gfx.c: 5 warnings, 30 errors compiling system_stm32f10x.c... compiling fonts.c... fonts.c(29): error: #20: identifier "NULL" is undefined FontDef Font_16x26 = {16, 26, NULL}; // ?????????? fonts.c: 0 warnings, 1 error compiling misc.c... C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\misc.c(99): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\misc.c(117): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\misc.c(159): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_NVIC_VECTTAB(NVIC_VectTab)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\misc.c(178): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_NVIC_LP(LowPowerMode)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\misc.c(202): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\misc.c: 5 warnings, 0 errors compiling stm32f10x_gpio.c... C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c(111): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c(178): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c(286): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c(308): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c(324): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c(346): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c(361): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c(377): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c(397): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c(420): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c(437): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c(466): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_GPIO_EVENTOUT_PORT_SOURCE(GPIO_PortSource)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c(486): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_FUNCTIONAL_STATE(NewState)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c(554): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_GPIO_REMAP(GPIO_Remap)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c(613): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_GPIO_EXTI_PORT_SOURCE(GPIO_PortSource)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c(632): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_GPIO_ETH_MEDIA_INTERFACE(GPIO_ETH_MediaInterface)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_gpio.c: 16 warnings, 0 errors compiling stm32f10x_rcc.c... C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(273): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_HSE(RCC_HSE)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(338): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(357): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_FUNCTIONAL_STATE(NewState)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(383): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(404): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_FUNCTIONAL_STATE(NewState)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(568): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(612): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_HCLK(RCC_SYSCLK)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(638): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_PCLK(RCC_HCLK)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(664): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_PCLK(RCC_HCLK)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(703): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_IT(RCC_IT)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(731): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_USBCLK_SOURCE(RCC_USBCLKSource)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(770): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_ADCCLK(RCC_PCLK2)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(832): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_LSE(RCC_LSE)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(865): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_FUNCTIONAL_STATE(NewState)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(882): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(896): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_FUNCTIONAL_STATE(NewState)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(1067): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_AHB_PERIPH(RCC_AHBPeriph)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(1098): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(1129): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(1188): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(1219): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(1240): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_FUNCTIONAL_STATE(NewState)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(1253): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_FUNCTIONAL_STATE(NewState)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(1285): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_MCO(RCC_MCO)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(1332): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_FLAG(RCC_FLAG)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(1406): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_GET_IT(RCC_IT)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c(1451): warning: #223-D: function "assert_param" declared implicitly assert_param(IS_RCC_CLEAR_IT(RCC_IT)); C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Device\StdPeriph_Driver\src\stm32f10x_rcc.c: 27 warnings, 0 errors assembling startup_stm32f10x_hd.s... compiling system_stm32f10x.c... ".\Objects\01.axf" - 66 Error(s), 56 Warning(s). Target not created. Build Time Elapsed: 00:00:20
06-27
在STM32寄存器编程中，如何确保寄存器地址映射的正确性？2.如何为STM32F103编写精确的微秒级延时函数？3.在裸机编程中，如何优化TFT屏幕的刷新速度？4.如何实现DHT11传感器的软件重试机制以提高稳定性？</think>### ...
#61-D: integer operation result is out of range #68-D: integer conversion resulted in a change of
m0_73075285的博客
12-15 851
查明原因： 编译器默认signed int即32位有符号整数类型,这样就有可能改写了符号位(最高位)。
Warning[Pe061]: integer operation result is out of range
u010568345的专栏
09-07 4228
http://www.amobbs.com/thread-5580618-1-1.html #define  j 7000 u16 i ; i=j * 5 ; IAR下编译警告：Warning[Pe061]: integer operation result is out of range  7000*5=35000 查到原因： 赋值前，7000×5是作
mdk错误记录（持续更新）
自由的天空
12-28 2051
1、 warning: #61-D: integer operation result is out of range 由于编译器默认signed int即32位有符号整数类型,而1<<31实际为0x80000000, 这样就有可能改写了符号位(最高位) 依此类推,(2<<30),(3<<29)...等都会出现编译警告问题. 解决办法为: ((unsigned...
c语言移位运算超出类型所能表示的范围
zhu_superman的博客
06-22 739
是因为在尝试对一个32位整型执行移位操作时超出了该类型所能表示的范围。在C语言中，整型字面量（如。左移28位时，整型字面量的范围仍然是32位，导致移位运算尝试创建一个超出32位整型表示范围的值。类型，其大小通常是32位（这可能根据编译器和平台有所不同，但在许多环境下是这样）。），来确保移位操作不会超出数据类型能表示的范围。类型的字面量，能够正确处理向左移动28位的操作，从而避免了警告。为了解决这个问题，您可以通过显式地将字面量声明为。类型或更大的整数类型（如。在这个修正后的代码中，
基于STM32单片机模块练习——在使用MPU6050时遇到的令人头疼的问题
qq_53971060的博客
08-18 5882
在使用MPU6050时遇到的令人头疼的问题 1.整个程序在一开始运行就卡死在启动文件 首先看一下，Target设置选项下的Use MicroLIB选项是不是选上勾了。 如果这个设置也解决不了问题，那么你需要检查一下程序里，是否写了printf函数的接口函数。因为MPU6050里面有 用到了这个函数，如果你没写这个函数的接口函数，就会导致系统卡死在系统文件里。 printf函数的接口函数 ///重定向c库函数printf到串口，重定向后可使用printf函数 int fputc(int ch, FILE *
关于单片机中1＜＜31出现integer operation result is out of range问题
jsnjsfq的博客
08-31 1352
1
国产超低功耗华大单片机Keil MDK编译中常遇的错误和警告汇总
热门推荐
华大MCU★的专栏
04-26 1万+
在MDK的开发中编译的时候会遇到各种问题，本文把开发中遇到的问题及相应的解决办法做个汇总，希望对大家有帮助。 说明：此颜色显示的内容为编译器提示的错误或警告； 此颜色显示的内容为用户程序中的内容具体的实际情况中会有不同。 error: #18: expected a ")"如果是出现在c文件中, 多半是因为少了一个")",或者错误行有编译器不识别的字符；如果出现在头...
评论 2
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

dxmcu

谢谢鼓励！

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付：¥1
获取中
扫码支付

您的余额不足，请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值