Vim+IDE编程环境设置

先看看图片：
设置如下：
步骤：  1.vi .vimrc

               2.将下面内容拷贝到.vimrc并保存退出

syntax on
set linebreak
set textwidth=80
set nocompatible
set history=400
set ruler
set number
set autochdir
set hlsearch
set noincsearch
set expandtab
set noerrorbells
set novisualbell
set t_vb= "close visual bell
set foldmethod=marker
set tabstop=4
set shiftwidth=4
set nobackup
set nowritebackup
"set noswapfile
set smarttab
set smartindent
set autoindent
set cindent
set wrap
set backspace=2
set autoread
set cmdheight=1
set showtabline=2 
"set clipboard+=unnamed
set tabpagemax=20
set laststatus=2
filetype on
filetype plugin on
filetype indent on
set cscopequickfix=s-,c-,d-,i-,t-,e-
set cursorline
set tags=/home/cx/MTK/release/vm_linux/chiling/kernel/linux-2.6.35/tags

"set the plug_in

let Tlist_Show_One_File = 1            " 不同时显示多个文件的tag，只显示当前文件的
let Tlist_Exit_OnlyWindow = 1          " 如果taglist窗口是最后一个窗口，则退出vim
let Tlist_Use_Right_Window = 0        " 在右侧窗口中显示taglist窗口


set fencs=utf-8,ucs-bom,gb18030,gbk,gb2312,cp936
nnoremap <silent><F4> :TlistToggle<CR>


 "NERD Tree
let NERDChristmasTree=1
let NERDTreeAutoCenter=1
"let NERDTreeBookmarksFile=$VIM.'\Data\NerdBookmarks.txt'
let NERDTreeMouseMode=2
let NERDTreeShowBookmarks=1
let NERDTreeShowFiles=1
let NERDTreeShowHidden=1
let NERDTreeShowLineNumbers=1
let NERDTreeWinPos='right'
let NERDTreeWinSize=31
nnoremap <silent><F3> :NERDTreeToggle<CR>


:cs add /home/MTK/release/vm_linux/chiling/kernel/linux-2.6.35/cscope.out /home/cx/MTK/release/vm_linux/chiling/kernel/linux-2.6.35

let NERDSpaceDelims=1       " 让注释符与语句之间留一个空格
let NERDCompactSexyComs=1   " 多行注释时样子更好看


" plugin - NeoComplCache.vim    自动补全插件

let g:neocomplcache_enable_at_startup=1 
let g:NeoComplCache_SmartCase = 1
let g:NeoComplCache_TagsAutoUpdate = 1
let g:NeoComplCache_EnableInfo = 1
let g:NeoComplCache_EnableCamelCaseCompletion = 1
let g:NeoComplCache_MinSyntaxLength = 3
let g:NeoComplCache_EnableSkipCompletion = 1
let g:NeoComplCache_SkipInputTime = '0.5'
let g:NeoComplCache_SnippetsDir = $VIMFILES.'/snippets'
" <TAB> completion.
inoremap <expr><TAB> pumvisible() ? "\<C-n>" : "\<TAB>"
" snippets expand key
imap <silent> <C-e> <Plug>(neocomplcache_snippets_expand)
smap <silent> <C-e> <Plug>(neocomplcache_snippets_expand)


set foldenable              " 开始折叠
set foldmethod=syntax       " 设置语法折叠
set foldcolumn=0            " 设置折叠区域的宽度
setlocal foldlevel=1        " 设置折叠层数为
"set foldclose=all         " 设置为自动关闭折叠                            
nnoremap <space> @=((foldclosed(line('.')) < 0) ? 'zc' : 'zo')<CR>
                            " 用空格键来开关折叠

" key stock

map <F12> :q!<cr> 

3.建立隐藏文件夹.vim，将后面链接下的压缩包解压后拷贝至.vim目录下，或者直接将我上传的vim.tat.gz解压即可（不许要积分），下载地址如下： http://download.youkuaiyun.com/detail/cx300mhz/3682555
4.需要注意的是：上面.vimrc的设置的第38行和第65行的路径改为你需要编辑的代码路径即可。如第38行改为：

tags=/home/your_name/your_code_path/tags
第65行改为：
:cs add /home/your_name/your_code_path/cscope.out /home/your_name/your_code_path
5.sudo apt-get install cscope
6.sudo apt-get install ctags
7.在你的代码树顶层目录下cscope -Rbq 
8.在你的代码树顶层目录下ctags -R

9.vi打开你路径下的代码，按F3,F4,屏幕切换为ctrl + w + w，空格键为折叠，F11全屏，F12为不保存而退出，ctrl + ]为查看函数调用和变量，查看完后回退为ctrl + t。F9为编译。