linksys 打印软件_拥有LinkSys WRT54G？ Sveasoft发布了Alchemy v6.0RC6，我已于凌晨2点进行安装...-优快云博客

本文介绍了作者对LinkSys WRT54G路由器使用Sveasoft定制固件的体验，包括稳定性、QoS功能、端口转发等特性，并对比了与默认固件的区别。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

linksys 打印软件

Shoot, who DOESN'T have this router? Seems like the LinkSys WRT54G is ubiquitous these days. Greg Hughes turned me on to this little $99 gem, and while I have a love-hate relationship with it (and Greg :) ) I have stuck with it.

射击，谁没有这个路由器？如今，LinkSys WRT54G似乎无处不在。格雷格·休斯(Greg Hughes)将我带到了这枚价值99美元的小宝石上，尽管我对此深有爱恨(和格雷格:))，但我一直坚持下去。

I just noticed on LinkSysInfo that "Sveasoft has released a new release candidate for alchemy v6.0RC6, This firmware is for WRT54G v1.x and v2.2 and WRT54GS 1.0 and v1.1 models."

我刚刚在LinkSysInfo上注意到：“ Sveasoft已发布了炼金术v6.0RC6的新候选版本，该固件适用于WRT54G v1.x和v2.2以及WRT54GS 1.0和v1.1模型。 ”

The deal is this, you paypal Sveasoft US$20 every year and they continue to improve the LinkSys firmware under the GPL. This little LinkSys is just a firmwarey Linux Box and god-forbid we should leave the default software on it! :) If you are too cheap for $20 there are free public versions you can run also.

交易是这样的，您每年向Sveasoft支付20美元，他们将继续根据GPL改进LinkSys固件。这个小小的LinkSys只是一个固件齐全Linux Box，天哪，我们应该保留默认软件！ :)如果20美元的价格太便宜了，您可以运行免费的公共版本。

There are a number of Firmwares available from Sveasoft under various code names. The ones you should know about are:

Sveasoft提供了许多固件，使用不同的代码名称。您应该知道的是：

Satori - This is the current stable/public release. It includes bandwidth management and VPN support along with a host of other good things. You can download this for free and mess around.
Satori-这是当前稳定/公共发行版。它包括带宽管理和VPN支持以及许多其他好处。您可以免费下载该软件，并且可以随意使用。
Alchemy (Alchemy-6.0-RC6 v3.01.3.8sv) - The current pre-release available to subscribers. It has a fantastic QoS interface (Quality of Service) to guarantee bandwidth by MAC, by IP Port, by protocol or by RJ45 port! It supports local DNS caching (DNS MASQ), UPnP (for seamless XBox support), Port Forwarding (so my two ReplayTVs can talk to Poopli), as well as the dubious ability to increase the milliwatt output of your Wireless router by 900%. This can make the wireless signal a lot more realiable if you're on the back porch if you know what I mean.
Alchemy(Alchemy-6.0-RC6 v3.01.3.8sv) -当前的预发行版本可供订户使用。它具有出色的QoS接口(服务质量)，可通过MAC，IP端口，协议或RJ45端口保证带宽！它支持本地DNS缓存(DNS MASQ)，UPnP(用于无缝XBox支持)，端口转发(以便我的两个ReplayTV可以与Poopli通话)，以及将无线路由器的毫瓦输出提高900％的可疑功能。如果您知道我的意思，那么如果您在后门廊上，这可以使无线信号更容易实现。

Good Things:

好东西：

QoS: I'm using it with Vonage and have been able to easily setup a Static IP in DHCP to be assigned to my Vonage Router via MAC address. Then I went into the Sveasoft Quality of Service interface and set Vonage to be at the "Premium" level. This means that bits going to and from my Vonage Router have PRIORITY. I tested this by downloading a 3 GIG file from Microsoft via FTP while the wife was on the phone. I've got 3 megabits downstream, so I get about 300-350K/sec down. When QoS was off, Mo could barely hear your sister and the digital artifacts sent here directly to me to complain. When QoS is on, Mo hasn't once mentioned any trouble with Vonage sound quality.
QoS：我将它与Vonage一起使用，并且能够轻松地在DHCP中设置静态IP，以通过MAC地址分配给我的Vonage路由器。然后，进入Sveasoft服务质量界面，并将Vonage设置为“高级”级别。这意味着往返于我的Vonage Router的比特具有优先权。我通过妻子在电话上通过FTP从Microsoft下载3 GIG文件进行了测试。我下游有3兆位，因此我大约每秒300-350K。当QoS关闭时，Mo几乎听不到您的姐姐，而这里的数字文物直接发送给我抱怨。启用QoS时，Mo从未提及Vonage音质的任何问题。
Port Forwarding: I've always found this to be hard to configure and a tricky thing. However, once you know what IPs each machine is on via static records in DHCP (rather than plain old static IPs which are hard to keep track of and configure) the Sveasoft interface makes it easy. I 'opened up ports' for Vonage and my two ReplayTVs, as well as the XBox for good measure (I know it's not required.)
端口转发：我一直发现这很难配置，而且很棘手。但是，一旦通过DHCP中的静态记录了解了每台计算机所使用的IP(而不是难以跟踪和配置的普通旧静态IP)，Sveasoft界面就可以轻松实现。我为Vonage和我的两个ReplayTV以及XBox “开放了端口”，以达到很好的效果(我知道这不是必需的。)

Bad Things:

坏事：

Flakey: This is a flakey router. I have to reboot it once or twice a month. Also, when I flashed it this evening with the new Alchemy build (I was upgrading from Satori) I had to hold the reset button for like two minutes. Also, the power light wouldn't stop flashing (a bad thing) until I disconnected and reconnected the Internet cable (a weird thing) then everything started working again (a good thing.)
Flakey：这是一个Fla路由器。我必须每月重新启动一次或两次。另外，当我今晚用新的Alchemy版本(从Satori进行升级)更新它时，必须按住复位按钮大约2分钟。另外，直到我断开连接并重新连接Internet电缆(这很奇怪)之后，电源指示灯才会停止闪烁(不好的事情)，然后一切又开始正常工作(一件好事情)。
I'm Not Smart On These Things: I got an 'A' in TCP/IP class and I can run Ethereal with the best of them, but I don't understand how the Linux TCP/IP stack is organized and I can't calculate NetMasks without scratch paper and I don't have my 128-bit WEP keep memorized, so I feel stoopid when I read the Support Forums on Sveasoft.
我在这些事情上并不聪明：我在TCP / IP类中得到了“ A”，并且我可以最好地使用它们运行Ethereal，但是我不了解Linux TCP / IP堆栈的组织方式，我可以。无法计算没有草稿纸的NetMask，并且我没有记住我的128位WEP，因此当我在Sveasoft上阅读支持论坛时，我会感到很愚蠢。
You CAN Screw Yourself and Your Router: Greg has messed his up during the firmware flashing process a few times. When that happens you sometimes have to open the router up and fiddle with dips or something. I haven't messed it up that bad, but I've gotten close. You should always have a default LinkSys firmware already downloaded as it sucks to have no Internet Access and the tool you need isn't already on your system. There's five second window of time on bootup when you can re-flash an older firmware via TFTP.
您可以自己动手操作路由器：格雷格(Greg)在固件刷新过程中几次搞砸了他。发生这种情况时，您有时必须将路由器打开，然后用浸水或其他东西弄弄。我并没有把它弄得那么糟，但是我已经接近了。您应该始终已经下载了默认的LinkSys固件，因为它糟透了，无法访问Internet，并且系统上还没有所需的工具。当您可以通过TFTP重新刷新较旧的固件时，有五秒钟的启动时间。

Thank God I got this working again before Mo wakes up. Having no email is bad, but having no phone service is a problem.

感谢上帝，我在莫醒来之前又开始了这项工作。没有电子邮件是不好的，但是没有电话服务是一个问题。

All that said, I'm digging it. Chris Brooks is running it now I believe, as well as Greg Hughes and (I think) Chris Sells without any screams of pain.

所有这些，我正在挖掘。我相信Chris Brooks ， Greg Hughes和(我认为) Chris Sells现在都在运行它，没有任何痛苦的尖叫声。

Do you run Sveasoft or the default firmware?

您运行Sveasoft还是默认固件？