EM Cloud Control 12.1.0.4 , Linux 6.5 , Oracle 11.2.0.3
在通过EM Cloud Control 配置好了数据库云后, 自助创建一个RAC one node(带数据)的数据库时,发生报错,参考库是单节点数据库(single instance),
查看log 是在Convert to RAC 的步骤出现错误如下, 后来查看metalink发现10.2.0.4 ~ 11.2.0.3版本的数据库都有这个问题,是一个未发布的bug 。
Failed - Job Failed
Step: Prepare Configuration (Failed)
Start Date 2015.11.11 11:57:34
Completed Date 2015.11.11 11:57:52
Targets vivus25
The cluster is not configured or is not running on node: szxcld002
Metalink 上的说明:
rconfig fails with error message " The cluster is not configured or is not running on node NODE_NAME" (文档 ID 1517394.1)
In this Document
Symptoms
Changes
Cause
Solution
APPLIES TO:
Oracle Server - Enterprise Edition - Version 10.2.0.4 to 11.2.0.3 [Release 10.2 to 11.2]
z*OBSOLETE: Microsoft Windows Server 2008 x64 (AMD64/EM64T)
SYMPTOMS
Case 1: When nodes name's specified in lower case in ConvertToRAC.xml file
Errors:
-------
Index of localNode in HostItemlist=-1
oracle.sysman.assistants.rconfig.engine.InvalidConfigurationException: Node
that has single instance database running should be specified in the
NodeList. Please specify node NODE1 as part of NodeList.
Case 2: When nodes name's specified in upper case in ConvertToRAC.xml file
Input:
------
Errors:
-------
The cluster is not configured or is not running on node: NODE1
CHANGES
Single instance to RACone/RAC db conversion using rconfig
CAUSE
The issue is due to unpublished bug 10144394.
SOLUTION
The issue is fixed in 11.2.0.4 (not yet released at the time of this writing) and later versions
Work around:
Specify nodes in same case as they were entered during CRS install in ConvertToRAC.xml file.
通过顾问找到了补丁号:
在通过EM Cloud Control 配置好了数据库云后, 自助创建一个RAC one node(带数据)的数据库时,发生报错,参考库是单节点数据库(single instance),
查看log 是在Convert to RAC 的步骤出现错误如下, 后来查看metalink发现10.2.0.4 ~ 11.2.0.3版本的数据库都有这个问题,是一个未发布的bug 。
Failed - Job Failed
Step: Prepare Configuration (Failed)
Start Date 2015.11.11 11:57:34
Completed Date 2015.11.11 11:57:52
Targets vivus25
The cluster is not configured or is not running on node: szxcld002
Metalink 上的说明:
rconfig fails with error message " The cluster is not configured or is not running on node NODE_NAME" (文档 ID 1517394.1)
In this Document
Symptoms
Changes
Cause
Solution
APPLIES TO:
Oracle Server - Enterprise Edition - Version 10.2.0.4 to 11.2.0.3 [Release 10.2 to 11.2]
z*OBSOLETE: Microsoft Windows Server 2008 x64 (AMD64/EM64T)
SYMPTOMS
Case 1: When nodes name's specified in lower case in ConvertToRAC.xml file
Errors:
-------
Index of localNode in HostItemlist=-1
oracle.sysman.assistants.rconfig.engine.InvalidConfigurationException: Node
that has single instance database running should be specified in the
NodeList. Please specify node NODE1 as part of NodeList.
Case 2: When nodes name's specified in upper case in ConvertToRAC.xml file
Input:
------
Errors:
-------
The cluster is not configured or is not running on node: NODE1
CHANGES
Single instance to RACone/RAC db conversion using rconfig
CAUSE
The issue is due to unpublished bug 10144394.
SOLUTION
The issue is fixed in 11.2.0.4 (not yet released at the time of this writing) and later versions
Work around:
Specify nodes in same case as they were entered during CRS install in ConvertToRAC.xml file.
通过顾问找到了补丁号:
12.1_WIN.X64:DB CONVERSION IS FAILING WHEN SPECIFY THE NODE LIST IN SMALL LETTER (补丁程序)
p14281126_112030_Generic.zip
p14281126_112030_Generic.zip
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/35489/viewspace-1828370/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/35489/viewspace-1828370/
本文详细介绍了在使用EMCloudControl配置数据库云后,自助创建RAConenode(带数据)数据库时遇到的问题及解决方法。主要问题出现在ConverttoRAC步骤,错误提示为集群未配置或未在指定节点运行。解决方案包括识别并修复由未发布的bug引起的错误,并提供了补丁程序的应用指导。特别强调了节点名称大小写一致性的重要性。
3万+

被折叠的 条评论
为什么被折叠?



