Setup Project 错误: Unable to update the dependencies of the project

本文介绍了解决VS2010中SetupProject错误“Unabletoupdatethedependenciesoftheproject”的步骤。主要涉及修改*.vdproj文件中的Hierarchy和File节点内容,然后重新加载并编译工程。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

Setup Project 错误: Unable to update the dependencies of the project

在VS2010中编译包含安装工程的解决方案提示错误:Unable to update the dependencies of the project
解决方法:
1、用记事本打开*.vdproj文件;
2、查找Hierarchy节点,删除节点中的所有内容,如下所示:

“Hierarchy”
{

}
3. 查找File节点,删除节点中的所有内容,如下所示:
“File”
{

}

4. 重新加载工程文件
5. 编译

C:\ProgramData\Anaconda3\lib\site-packages\numpy\__init__.py:143: UserWarning: mkl-service package failed to import, therefore Intel(R) MKL initialization ensuring its correct out-of-the box operation under condition when Gnu OpenMP had already been loaded by Python process is not assured. Please install mkl-service package, see http://github.com/IntelPython/mkl-service from . import _distributor_init C:\ProgramData\Anaconda3\lib\site-packages\numpy\__init__.py:143: UserWarning: mkl-service package failed to import, therefore Intel(R) MKL initialization ensuring its correct out-of-the box operation under condition when Gnu OpenMP had already been loaded by Python process is not assured. Please install mkl-service package, see http://github.com/IntelPython/mkl-service from . import _distributor_init Traceback (most recent call last): File "D:\python\pythonProject1\1\fj.py", line 1, in <module> import pandas as pd File "C:\ProgramData\Anaconda3\lib\site-packages\pandas\__init__.py", line 16, in <module> raise ImportError( ImportError: Unable to import required dependencies: numpy: IMPORTANT: PLEASE READ THIS FOR ADVICE ON HOW TO SOLVE THIS ISSUE! Importing the numpy C-extensions failed. This error can happen for many reasons, often due to issues with your setup or how NumPy was installed. We have compiled some common reasons and troubleshooting tips at: https://numpy.org/devdocs/user/troubleshooting-importerror.html Please note and check the following: * The Python version is: Python3.9 from "C:\ProgramData\Anaconda3\python.exe" * The NumPy version is: "1.20.3" and make sure that they are the versions you expect. Please carefully study the documentation linked above for further help. Original error was: DLL load failed while importing _multiarray_umath: 找不到指定的模块。
03-18
Collecting matplotlib Using cached matplotlib-3.10.3.tar.gz (34.8 MB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Installing backend dependencies: started Installing backend dependencies: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'error' error: subprocess-exited-with-error Preparing metadata (pyproject.toml) did not run successfully. exit code: 1 [22 lines of output] + meson setup C:\Users\15306\AppData\Local\Temp\pip-install-1cm5zxfs\matplotlib_047401c8610d4b43a3cf47d3e24d7b9b C:\Users\15306\AppData\Local\Temp\pip-install-1cm5zxfs\matplotlib_047401c8610d4b43a3cf47d3e24d7b9b\.mesonpy-rudlakad -Dbuildtype=release -Db_ndebug=if-release -Db_vscrt=md --native-file=C:\Users\15306\AppData\Local\Temp\pip-install-1cm5zxfs\matplotlib_047401c8610d4b43a3cf47d3e24d7b9b\.mesonpy-rudlakad\meson-python-native-file.ini The Meson build system Version: 1.8.2 Source dir: C:\Users\15306\AppData\Local\Temp\pip-install-1cm5zxfs\matplotlib_047401c8610d4b43a3cf47d3e24d7b9b Build dir: C:\Users\15306\AppData\Local\Temp\pip-install-1cm5zxfs\matplotlib_047401c8610d4b43a3cf47d3e24d7b9b\.mesonpy-rudlakad Build type: native build Program python found: YES 3.12.0 3.12.0 Project name: matplotlib Project version: 3.10.3 ..\meson.build:1:0: ERROR: Unable to get gcc pre-processor defines: Compiler stdout: ----- Compiler stderr: cc: fatal error: cannot execute 'cc1': CreateProcess: No such file or directory compilation terminated. ----- A full log can be found at C:\Users\15306\AppData\Local\Temp\pip-install-1cm5zxfs\matplotlib_047401c8610d4b43a3cf47d3e24d7b9b\.mesonpy-rudlakad\meson-logs\meson-log.txt [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. [notice] A new release of pip is available: 25.0.1 -> 25.1.1 [notice] To update, run: python.exe -m pip install --upgrade pip error: metadata-generation-failed Encountered error while generating package metadata. See above for output. note: This is an issue with the package mentioned above, not pip. hint: See above for details.
最新发布
06-22
C:\Users\86132\.conda\envs\bilibil\lib\site-packages\numpy\__init__.py:142: UserWarning: mkl-service package failed to import, therefore Intel(R) MKL initialization ensuring its correct out-of-the box operation under condition when Gnu OpenMP had already been loaded by Python process is not assured. Please install mkl-service package, see http://github.com/IntelPython/mkl-service from . import _distributor_init C:\Users\86132\.conda\envs\bilibil\lib\site-packages\numpy\__init__.py:142: UserWarning: mkl-service package failed to import, therefore Intel(R) MKL initialization ensuring its correct out-of-the box operation under condition when Gnu OpenMP had already been loaded by Python process is not assured. Please install mkl-service package, see http://github.com/IntelPython/mkl-service from . import _distributor_init Traceback (most recent call last): File "D:\pythonProject7\B站\基本分析.py", line 1, in <module> import pandas as pd File "C:\Users\86132\.conda\envs\bilibil\lib\site-packages\pandas\__init__.py", line 16, in <module> raise ImportError( ImportError: Unable to import required dependencies: numpy: IMPORTANT: PLEASE READ THIS FOR ADVICE ON HOW TO SOLVE THIS ISSUE! Importing the numpy C-extensions failed. This error can happen for many reasons, often due to issues with your setup or how NumPy was installed. We have compiled some common reasons and troubleshooting tips at: https://numpy.org/devdocs/user/troubleshooting-importerror.html Please note and check the following: * The Python version is: Python3.8 from "C:\Users\86132\.conda\envs\bilibil\python.exe" * The NumPy version is: "1.22.3" and make sure that they are the versions you expect. Please carefully study the documentation linked above for further help. Original error was: DLL load failed while importing _multiarray_umath: 找不到指定的模块。
03-15
评论 3
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值