what issues Slag vertical roller mill need attention

REVIEW: slag vertical roller mill startup has a direct impact on the normal operation of the device, so the boot device must be correct, this article is to analyze the vertical roller mill equipment at the start of the time to pay attention to what the problem, ensure that the equipment can be normal start up.

Slag is a waste generated in industrial production, recycling slag to reduce waste of resources and environmental pollution are associated with great help, the study found that recycling slag vertical roller mill equipment can not be separated, and the slag production line neutral the normal start of the normal operation of mills and equipment of a great relationship, here to introduce the slag vertical roller mill equipment at boot time what issues need attention.

The first is to check whether the various parts of the device is normal, for example, to check and adjust the lubricating oil lubrication system, because of the long-term lubrication ensure stable operation of the equipment plays a key role, if the vertical roller mill equipment lubricants over more heat will cause the device, too little will cause damage to the equipment, in addition to also pay attention to the amount of oil in selected vertical roller milling machine, and the purity of varieties of lubricants, lubricating oil can not contain impurities;

The second is the cooling water, and air compressors, gas tank and check the pipes and valves, and equipment to be checked before starting the main gear and grinding roller lubrication, cooling water on the road hydraulic valve cabinet lock valve is open, and control appropriate flow, and then see if the air compressor starts, if all the sewage tank in accordance with regulations, compressed air piping and valves without leakage phenomenon, if none of these problems could be the next step in the operation;

Again valve device is checked to see whether all of the manual valve in the right position, whether flexible operation before the device starts;

Finally, we must check fastening vertical roller mill equipment, ensure the mill, fans, compressors, etc. can not appear easy to loose bolt loose parts, equipment, etc. should be moving rod strict inspection, hoist connection between Douzi and chains should be checked.

The above article introduces the slag vertical roller mill equipment at boot time should be noted that the main problem is to check all parts of the device is working properly, such as lubricating oil lubrication system of checks, check valves, etc., to do these checks operation of the equipment to lay the foundation.

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/30047666/viewspace-1390470/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/30047666/viewspace-1390470/