Android -- Audio系统之AudioTrack内部实现简析（三）
上一篇中，我们介绍了一个使用AudioTrack的简单示例，并初步分析了使用AudioTrack API时每一步的Java调用实现；承接之前的内容，我们对应Demo中的示例，分析Java AudioTrack实现，最后得出了6个重要的函数调用：
- native_get_min_buff_size()：获取最小Buffer大小
- native_setup()：完成AudioTrack的创建
- native_start()：AudioTrack启动播放
- native_write_byte()/native_write_short()...：往AudioTrack写入音频数据
- natvie_stop()：AudioTrack停止播放
- native_release()：释放AudioTrack绑定的系统资源
一、android_media_AudioTrack_get_min_buff_size（）
我们获取所需的最小Buffer大小时，会调用到native_get_min_buff_size()方法；而它对应的JNI实现是如下函数：
// ----------------------------------------------------------------------------
// returns the minimum required size for the successful creation of a streaming AudioTrack
// returns -1 if there was an error querying the hardware.
static jint android_media_AudioTrack_get_min_buff_size(JNIEnv *env, jobject thiz,
jint sampleRateInHertz, jint channelCount, jint audioFormat) {
size_t frameCount;
const status_t status = AudioTrack::getMinFrameCount(&frameCount, AUDIO_STREAM_DEFAULT,
sampleRateInHertz);//根据信息,得到所需的最小帧个数
if (status != NO_ERROR) {
ALOGE("AudioTrack::getMinFrameCount() for sample rate %d failed with status %d",
sampleRateInHertz, status);
return -1;
}
const audio_format_t format = audioFormatToNative(audioFormat);//Java和JNI之间的类型转换
if (audio_has_proportional_frames(format)) {//只在PCM和IEC61937时,返回TRUE
const size_t bytesPerSample = audio_bytes_per_sample(format);//返回该格式下每个采样点有多少字节数据
return frameCount * channelCount * bytesPerSample;//一单位的帧 = 一个采样点的字节数 X 声道数;一单位的帧数据 X 所需帧的最小个数 = 这里的min_buf_size.
} else {
return frameCount;
}
}首先调用了AudioTrack::getMinFrameCount()函数。这里的AudioTrack存在于Native空间，它与前面使用的Java AudioTrack对应，是它在Native空间的代理，负责与AudioFlinger交互。
getMinFrameCount()函数会通过AudioSystem去查询当前Audio硬件支持的各种信息，进行综合得出这里所需的最小帧个数：
// static
status_t AudioTrack::getMinFrameCount(
size_t* frameCount,
audio_stream_type_t streamType,
uint32_t sampleRate)
{
if (frameCount == NULL) {
return BAD_VALUE;
}
// FIXME handle in server, like createTrack_l(), possible missing info:
// audio_io_handle_t output
// audio_format_t format
// audio_channel_mask_t channelMask
// audio_output_flags_t flags (FAST)
uint32_t afSampleRate;
status_t status;
status = AudioSystem::getOutputSamplingRate(&afSampleRate, streamType);//查询硬件支持的采样率大小,一般返回支持的峰值
if (status != NO_ERROR) {
ALOGE("Unable to query output sample rate for stream type %d; status %d",
streamType, status);
return status;
}
size_t afFrameCount;
status = AudioSystem::getOutputFrameCount(&afFrameCount, streamType);//查询硬件内部的缓冲区大小,以帧为单位
if (status != NO_ERROR) {
ALOGE("Unable to query output frame count for stream type %d; status %d",
streamType, status);
return status;
}
uint32_t afLatency;
status = AudioSystem::getOutputLatency(&afLatency, streamType);//查询硬件的延时时间信息
if (status != NO_ERROR) {
ALOGE("Unable to query output latency for stream type %d; status %d",
streamType, status);
return status;
}
// When called from createTrack, speed is 1.0f (normal speed).
// This is rechecked again on setting playback rate (TODO: on setting sample rate, too).
*frameCount = calculateMinFrameCount(afLatency, afFrameCount, afSampleRate, sampleRate, 1.0f
/*, 0 notificationsPerBufferReq*/);//计算所需的最小帧个数
// The formula above should always produce a non-zero value under normal circumstances:
// AudioTrack.SAMPLE_RATE_HZ_MIN <= sampleRate <= AudioTrack.SAMPLE_RATE_HZ_MAX.
// Return error in the unlikely event that it does not, as that's part of the API contract.
if (*frameCount == 0) {
ALOGE("AudioTrack::getMinFrameCount failed for streamType %d, sampleRate %u",
streamType, sampleRate);
return BAD_VALUE;
}
ALOGV("getMinFrameCount=%zu: afFrameCount=%zu, afSampleRate=%u, afLatency=%u",
*frameCount, afFrameCount, afSampleRate, afLatency);
return NO_ERROR;
}// Must match similar computation in createTrack_l in Threads.cpp.
// TODO: Move to a common library
static size_t calculateMinFrameCount(
uint32_t afLatencyMs, uint32_t afFrameCount, uint32_t afSampleRate,
uint32_t sampleRate, float speed /*, uint32_t notificationsPerBufferReq*/)
{
// Ensure that buffer depth covers at least audio hardware latency
uint32_t minBufCount = afLatencyMs / ((1000 * afFrameCount) / afSampleRate);//硬件内部缓冲区的最小个数,最低为2个;以帧为单位
if (minBufCount < 2) {
minBufCount = 2;
}
#if 0
// The notificationsPerBufferReq parameter is not yet used for non-fast tracks,
// but keeping the code here to make it easier to add later.
if (minBufCount < notificationsPerBufferReq) {
minBufCount = notificationsPerBufferReq;
}
#endif
ALOGV("calculateMinFrameCount afLatency %u afFrameCount %u afSampleRate %u "
"sampleRate %u speed %f minBufCount: %u" /*" notificationsPerBufferReq %u"*/,
afLatencyMs, afFrameCount, afSampleRate, sampleRate, speed, minBufCount
/*, notificationsPerBufferReq*/);
return minBufCount * sourceFramesNeededWithTimestretch(
sampleRate, afFrameCount, afSampleRate, speed);
}if (audio_has_proportional_frames(format)) {//只在PCM和IEC61937时,返回TRUE
const size_t bytesPerSample = audio_bytes_per_sample(format);//返回该格式下每个采样点有多少字节数据
return frameCount * channelCount * bytesPerSample;//一单位的帧 = 一个采样点的字节数 X 声道数;一单位的帧数据 X 所需帧的最小个数 = 这里的min_buf_size.
} else {
return frameCount;
}frameCount * channelCount * bytesPerSample- 一单位的帧 = 一个采样点的字节数 X 声道数;
- min_buf_size.=一单位的帧数据 X 所需帧的最小个数;
至此，我们就得到了所需的min_buf_size。这部分内容我们只会分析到JNI层，不过由于该部分内容中涉及Native AudioTrack的部分都较为简单，索性就一起分析了。
二、native_setup（）
得到了所需的min_buf_size后，我们就会去创建Java AudioTrack实例，准备播放了；Java AudioTrack对象的创建最好会调用到native_setup()函数，它的JNI实现是：
// ----------------------------------------------------------------------------
static jint
android_media_AudioTrack_setup(JNIEnv *env, jobject thiz, jobject weak_this, jobject jaa,
jintArray jSampleRate, jint channelPositionMask, jint channelIndexMask,
jint audioFormat, jint buffSizeInBytes, jint memoryMode, jintArray jSession,
jlong nativeAudioTrack/*0*/) {
ALOGV("sampleRates=%p, channel mask=%x, index mask=%x, audioFormat(Java)=%d, buffSize=%d"
"nativeAudioTrack=0x%llX",
jSampleRate, channelPositionMask, channelIndexMask, audioFormat, buffSizeInBytes,
nativeAudioTrack);
sp<AudioTrack> lpTrack = 0;
if (jSession == NULL) {
ALOGE("Error creating AudioTrack: invalid session ID pointer");
return (jint) AUDIO_JAVA_ERROR;
}
jint* nSession = (jint *) env->GetPrimitiveArrayCritical(jSession, NULL);
if (nSession == NULL) {
ALOGE("Error creating AudioTrack: Error retrieving session id pointer");
return (jint) AUDIO_JAVA_ERROR;
}
audio_session_t sessionId = (audio_session_t) nSession[0];
env->ReleasePrimitiveArrayCritical(jSession, nSession, 0);
nSession = NULL;
AudioTrackJniStorage* lpJniStorage = NULL;//保存一些重要信息
audio_attributes_t *paa = NULL;//保存AudioAttributes中的一些设置信息
jclass clazz = env->GetObjectClass(thiz);//获取Java空间AudioTrack的类对象
if (clazz == NULL) {
ALOGE("Can't find %s when setting up callback.", kClassPathName);
return (jint) AUDIOTRACK_ERROR_SETUP_NATIVEINITFAILED;
}
// if we pass in an existing *Native* AudioTrack, we don't need to create/initialize one.
if (nativeAudioTrack == 0) {//nativeAudioTrack判别当前是否需要重新构建Native AudioTrack
if (jaa == 0) {
ALOGE("Error creating AudioTrack: invalid audio attributes");
return (jint) AUDIO_JAVA_ERROR;
}
if (jSampleRate == 0) {
ALOGE("Error creating AudioTrack: invalid sample rates");
return (jint) AUDIO_JAVA_ERROR;
}
int* sampleRates = env->GetIntArrayElements(jSampleRate, NULL);
int sampleRateInHertz = sampleRates[0];
env->ReleaseIntArrayElements(jSampleRate, sampleRates, JNI_ABORT);
// Invalid channel representations are caught by !audio_is_output_channel() below.
audio_channel_mask_t nativeChannelMask = nativeChannelMaskFromJavaChannelMasks(
channelPositionMask, channelIndexMask);
if (!audio_is_output_channel(nativeChannelMask)) {
ALOGE("Error creating AudioTrack: invalid native channel mask %#x.", nativeChannelMask);
return (jint) AUDIOTRACK_ERROR_SETUP_INVALIDCHANNELMASK;
}
uint32_t channelCount = audio_channel_count_from_out_mask(nativeChannelMask);
// check the format.
// This function was called from Java, so we compare the format against the Java constants
audio_format_t format = audioFormatToNative(audioFormat);
if (format == AUDIO_FORMAT_INVALID) {
ALOGE("Error creating AudioTrack: unsupported audio format %d.", audioFormat);
return (jint) AUDIOTRACK_ERROR_SETUP_INVALIDFORMAT;
}
// compute the frame count
size_t frameCount;
if (audio_is_linear_pcm(format)) {
const size_t bytesPerSample = audio_bytes_per_sample(format);
frameCount = buffSizeInBytes / (channelCount * bytesPerSample);
} else {
frameCount = buffSizeInBytes;
}
// create the native AudioTrack object
lpTrack = new AudioTrack();//创建 Native AudioTrack,使用无参构造函数,只会初始化一些成员值
// read the AudioAttributes values
paa = (audio_attributes_t *) calloc(1, sizeof(audio_attributes_t));//初始化paa
//将AudioAttributes中的一些配置信息保存到paa结构对象中
const jstring jtags =
(jstring) env->GetObjectField(jaa, javaAudioAttrFields.fieldFormattedTags);
const char* tags = env->GetStringUTFChars(jtags, NULL);
// copying array size -1, char array for tags was calloc'd, no need to NULL-terminate it
strncpy(paa->tags, tags, AUDIO_ATTRIBUTES_TAGS_MAX_SIZE - 1);
env->ReleaseStringUTFChars(jtags, tags);
paa->usage = (audio_usage_t) env->GetIntField(jaa, javaAudioAttrFields.fieldUsage);
paa->content_type =
(audio_content_type_t) env->GetIntField(jaa, javaAudioAttrFields.fieldContentType);
paa->flags = env->GetIntField(jaa, javaAudioAttrFields.fieldFlags);
ALOGV("AudioTrack_setup for usage=%d content=%d flags=0x%#x tags=%s",
paa->usage, paa->content_type, paa->flags, paa->tags);
// initialize the callback information:
// this data will be passed with every AudioTrack callback
lpJniStorage = new AudioTrackJniStorage();//创造AudioTrackJniStorage实例
//将一些信息保存到AudioTrackJniStorage::mCallbackData结构对象中,用于后续的回调
lpJniStorage->mCallbackData.audioTrack_class = (jclass)env->NewGlobalRef(clazz);//指向Java AudioTrack类实例
// we use a weak reference so the AudioTrack object can be garbage collected.
lpJniStorage->mCallbackData.audioTrack_ref = env->NewGlobalRef(weak_this);//指向Java AudioTrack实例的弱引用
lpJniStorage->mCallbackData.busy = false;
// initialize the native AudioTrack object
status_t status = NO_ERROR;
switch (memoryMode) {
case MODE_STREAM:
status = lpTrack->set(
AUDIO_STREAM_DEFAULT,// stream type, but more info conveyed in paa (last argument)
sampleRateInHertz,
format,// word length, PCM
nativeChannelMask,
frameCount,
AUDIO_OUTPUT_FLAG_NONE,
audioCallback, &(lpJniStorage->mCallbackData),//callback, callback data (user)
0,// notificationFrames == 0 since not using EVENT_MORE_DATA to feed the AudioTrack
0,// shared mem
true,// thread can call Java
sessionId,// audio session ID
AudioTrack::TRANSFER_SYNC,
NULL, // default offloadInfo
-1, -1, // default uid, pid values
paa);
break;
case MODE_STATIC:
// AudioTrack is using shared memory
if (!lpJniStorage->allocSharedMem(buffSizeInBytes)) {
ALOGE("Error creating AudioTrack in static mode: error creating mem heap base");
goto native_init_failure;
}
status = lpTrack->set(
AUDIO_STREAM_DEFAULT,// stream type, but more info conveyed in paa (last argument)
sampleRateInHertz,
format,// word length, PCM
nativeChannelMask,
frameCount,
AUDIO_OUTPUT_FLAG_NONE,
audioCallback, &(lpJniStorage->mCallbackData),//callback, callback data (user));
0,// notificationFrames == 0 since not using EVENT_MORE_DATA to feed the AudioTrack
lpJniStorage->mMemBase,// shared mem
true,// thread can call Java
sessionId,// audio session ID
AudioTrack::TRANSFER_SHARED,
NULL, // default offloadInfo
-1, -1, // default uid, pid values
paa);
break;
default:
ALOGE("Unknown mode %d", memoryMode);
goto native_init_failure;
}
if (status != NO_ERROR) {
ALOGE("Error %d initializing AudioTrack", status);
goto native_init_failure;
}
} else { // end if (nativeAudioTrack == 0)
lpTrack = (AudioTrack*)nativeAudioTrack;
// TODO: We need to find out which members of the Java AudioTrack might
// need to be initialized from the Native AudioTrack
// these are directly returned from getters:
// mSampleRate
// mAudioFormat
// mStreamType
// mChannelConfiguration
// mChannelCount
// mState (?)
// mPlayState (?)
// these may be used internally (Java AudioTrack.audioParamCheck():
// mChannelMask
// mChannelIndexMask
// mDataLoadMode
// initialize the callback information:
// this data will be passed with every AudioTrack callback
lpJniStorage = new AudioTrackJniStorage();
lpJniStorage->mCallbackData.audioTrack_class = (jclass)env->NewGlobalRef(clazz);
// we use a weak reference so the AudioTrack object can be garbage collected.
lpJniStorage->mCallbackData.audioTrack_ref = env->NewGlobalRef(weak_this);
lpJniStorage->mCallbackData.busy = false;
}
nSession = (jint *) env->GetPrimitiveArrayCritical(jSession, NULL);
if (nSession == NULL) {
ALOGE("Error creating AudioTrack: Error retrieving session id pointer");
goto native_init_failure;
}
// read the audio session ID back from AudioTrack in case we create a new session
nSession[0] = lpTrack->getSessionId();
env->ReleasePrimitiveArrayCritical(jSession, nSession, 0);
nSession = NULL;
{
const jint elements[1] = { (jint) lpTrack->getSampleRate() };
env->SetIntArrayRegion(jSampleRate, 0, 1, elements);
}
{ // scope for the lock
Mutex::Autolock l(sLock);
sAudioTrackCallBackCookies.add(&lpJniStorage->mCallbackData);
}
// save our newly created C++ AudioTrack in the "nativeTrackInJavaObj" field
// of the Java object (in mNativeTrackInJavaObj)
setAudioTrack(env, thiz, lpTrack);//将Native AudioTrack的实例地址保存到Java AudioTrack::mNativeTrackInJavaObj字段中,绑定两对象
// save the JNI resources so we can free them later
//ALOGV("storing lpJniStorage: %x\n", (long)lpJniStorage);
env->SetLongField(thiz, javaAudioTrackFields.jniData, (jlong)lpJniStorage);
// since we had audio attributes, the stream type was derived from them during the
// creation of the native AudioTrack: push the same value to the Java object
env->SetIntField(thiz, javaAudioTrackFields.fieldStreamType, (jint) lpTrack->streamType());
if (paa != NULL) {
// audio attributes were copied in AudioTrack creation
free(paa);
paa = NULL;
}
return (jint) AUDIO_JAVA_SUCCESS;
// failures:
native_init_failure:
if (paa != NULL) {
free(paa);
}
if (nSession != NULL) {
env->ReleasePrimitiveArrayCritical(jSession, nSession, 0);
}
env->DeleteGlobalRef(lpJniStorage->mCallbackData.audioTrack_class);
env->DeleteGlobalRef(lpJniStorage->mCallbackData.audioTrack_ref);
delete lpJniStorage;
env->SetLongField(thiz, javaAudioTrackFields.jniData, 0);
// lpTrack goes out of scope, so reference count drops to zero
return (jint) AUDIOTRACK_ERROR_SETUP_NATIVEINITFAILED;
}
//调用无参构造函数;初始化状态和一些变量
AudioTrack::AudioTrack()
: mStatus(NO_INIT), //当前AudioTrack的内部状态
mState(STATE_STOPPED), //当前Track的运行状态
mPreviousPriority(ANDROID_PRIORITY_NORMAL),
mPreviousSchedulingGroup(SP_DEFAULT),
mPausedPosition(0),
mSelectedDeviceId(AUDIO_PORT_HANDLE_NONE)
{
mAttributes.content_type = AUDIO_CONTENT_TYPE_UNKNOWN;
mAttributes.usage = AUDIO_USAGE_UNKNOWN;
mAttributes.flags = 0x0;
strcpy(mAttributes.tags, "");
}class AudioTrackJniStorage {
public:
sp<MemoryHeapBase> mMemHeap;
sp<MemoryBase> mMemBase;
audiotrack_callback_cookie mCallbackData;
sp<JNIDeviceCallback> mDeviceCallback;
AudioTrackJniStorage() {
mCallbackData.audioTrack_class = 0;//Java AudioTrack类型实例
mCallbackData.audioTrack_ref = 0;//Java AudioTrack对象实例的弱引用
}
~AudioTrackJniStorage() {
mMemBase.clear();
mMemHeap.clear();
}
bool allocSharedMem(int sizeInBytes) {
mMemHeap = new MemoryHeapBase(sizeInBytes, 0, "AudioTrack Heap Base");
if (mMemHeap->getHeapID() < 0) {
return false;
}
mMemBase = new MemoryBase(mMemHeap, 0, sizeInBytes);
return true;
}
};class JNIDeviceCallback: public AudioSystem::AudioDeviceCallback
{
public:
JNIDeviceCallback(JNIEnv* env, jobject thiz, jobject weak_thiz, jmethodID postEventFromNative);
~JNIDeviceCallback();
virtual void onAudioDeviceUpdate(audio_io_handle_t audioIo,
audio_port_handle_t deviceId);
private:
void sendEvent(int event);
jclass mClass; // Reference to AudioTrack/AudioRecord class
jobject mObject; // Weak ref to AudioTrack/AudioRecord Java object to call on
jmethodID mPostEventFromNative; // postEventFromNative method ID.
};
struct audiotrack_callback_cookie {
jclass audioTrack_class;
jobject audioTrack_ref;
bool busy;
Condition cond;
};class MemoryBase : public BnMemory
{
public:
MemoryBase(const sp<IMemoryHeap>& heap, ssize_t offset, size_t size);
virtual ~MemoryBase();
virtual sp<IMemoryHeap> getMemory(ssize_t* offset, size_t* size) const;
protected:
size_t getSize() const { return mSize; }//返回内存区域大小
ssize_t getOffset() const { return mOffset; }
const sp<IMemoryHeap>& getHeap() const { return mHeap; }//返回创建共享内存的MemoryHeapBase实例
private:
size_t mSize;//共享内存的区域大小
ssize_t mOffset;//偏移量
sp<IMemoryHeap> mHeap;//创建共享内存的MemoryHeapBase实例
};class MemoryHeapBase : public virtual BnMemoryHeap
{
public:
enum {
READ_ONLY = IMemoryHeap::READ_ONLY,
// memory won't be mapped locally, but will be mapped in the remote
// process.
DONT_MAP_LOCALLY = 0x00000100,
NO_CACHING = 0x00000200
};
/*
* maps the memory referenced by fd. but DOESN'T take ownership
* of the filedescriptor (it makes a copy with dup()
*/
MemoryHeapBase(int fd, size_t size, uint32_t flags = 0, uint32_t offset = 0);
/*
* maps memory from the given device
*/
MemoryHeapBase(const char* device, size_t size = 0, uint32_t flags = 0);
/*
* maps memory from ashmem, with the given name for debugging
*/
MemoryHeapBase(size_t size, uint32_t flags = 0, char const* name = NULL);
virtual ~MemoryHeapBase();
/* implement IMemoryHeap interface */
virtual int getHeapID() const;
/* virtual address of the heap. returns MAP_FAILED in case of error */
virtual void* getBase() const;
virtual size_t getSize() const;
virtual uint32_t getFlags() const;
virtual uint32_t getOffset() const;
const char* getDevice() const;
/* this closes this heap -- use carefully */
void dispose();
/* this is only needed as a workaround, use only if you know
* what you are doing */
status_t setDevice(const char* device) {
if (mDevice == 0)
mDevice = device;
return mDevice ? NO_ERROR : ALREADY_EXISTS;
}
protected:
MemoryHeapBase();
// init() takes ownership of fd
status_t init(int fd, void *base, int size,
int flags = 0, const char* device = NULL);
private:
status_t mapfd(int fd, size_t size, uint32_t offset = 0);
int mFD;//共享内存的文件描述符
size_t mSize;//创建的共享内存的大小
void* mBase;//创建共享内存的首地址
uint32_t mFlags;
const char* mDevice;
bool mNeedUnmap;
uint32_t mOffset;//
};AudioTrackJniStorage提供了创建共享内存的函数allocSharedMem()：
bool allocSharedMem(int sizeInBytes) {
mMemHeap = new MemoryHeapBase(sizeInBytes, 0, "AudioTrack Heap Base");
if (mMemHeap->getHeapID() < 0) {
return false;
}
mMemBase = new MemoryBase(mMemHeap, 0, sizeInBytes);
return true;
}参数是指定的要创建的共享内存大小。由函数、类型定义可知，MemoryBase通过MemoryHeapBase可以获取共享内存的具体信息，MemoryHeapBase具体实现共享内存的创建操作。
分析MemoryHeapBase的创建过程：
MemoryHeapBase::MemoryHeapBase(size_t size, uint32_t flags, char const * name)
: mFD(-1), mSize(0), mBase(MAP_FAILED), mFlags(flags),
mDevice(0), mNeedUnmap(false), mOffset(0)
{
const size_t pagesize = getpagesize();
size = ((size + pagesize-1) & ~(pagesize-1));
int fd = ashmem_create_region(name == NULL ? "MemoryHeapBase" : name, size);//libcutils提供,打开/dev/ashmem设备,并获得一个fd;创建一块指定大小的内存.
ALOGE_IF(fd<0, "error creating ashmem region: %s", strerror(errno));
if (fd >= 0) {
if (mapfd(fd, size) == NO_ERROR) {//mmap映射,得到内存地址;并保存与该内存区域有关的信息
if (flags & READ_ONLY) {
ashmem_set_prot_region(fd, PROT_READ);
}
}
}
}status_t MemoryHeapBase::mapfd(int fd, size_t size, uint32_t offset)
{
if (size == 0) {
// try to figure out the size automatically
struct stat sb;
if (fstat(fd, &sb) == 0)
size = sb.st_size;
// if it didn't work, let mmap() fail.
}
if ((mFlags & DONT_MAP_LOCALLY) == 0) {
void* base = (uint8_t*)mmap(0, size,
PROT_READ|PROT_WRITE, MAP_SHARED, fd, offset);
if (base == MAP_FAILED) {
ALOGE("mmap(fd=%d, size=%u) failed (%s)",
fd, uint32_t(size), strerror(errno));
close(fd);
return -errno;
}
//ALOGD("mmap(fd=%d, base=%p, size=%lu)", fd, base, size);
mBase = base;
mNeedUnmap = true;
} else {
mBase = 0; // not MAP_FAILED
mNeedUnmap = false;
}
mFD = fd;
mSize = size;
mOffset = offset;
return NO_ERROR;
}MemoryBase::MemoryBase(const sp<IMemoryHeap>& heap,
ssize_t offset, size_t size)
: mSize(size), mOffset(offset), mHeap(heap)//初始化成员
{
}
sp<IMemoryHeap> MemoryBase::getMemory(ssize_t* offset, size_t* size) const
{
if (offset) *offset = mOffset;//返回内存地址偏移量
if (size) *size = mSize;//返回内存区域的大小
return mHeap;//返回创建共享内存的MemoryHeapBase实例
}
MemoryBase::~MemoryBase()
{
}
返回到android_media_AudioTrack_setup()函数，在创建完AudioTrack、AudioTrackJniStorage，并执行了一些初始化动作后，就会去执行AudioTrack::set()函数。该函数的调用与上层传下的memoryMode有关，即跟STREAM/STATIC模式有关。两种模式下，该函数的调用略有不同：
switch (memoryMode) {
case MODE_STREAM:
status = lpTrack->set(
AUDIO_STREAM_DEFAULT,// stream type, but more info conveyed in paa (last argument)
sampleRateInHertz,
format,// word length, PCM
nativeChannelMask,
frameCount,
AUDIO_OUTPUT_FLAG_NONE,
audioCallback, &(lpJniStorage->mCallbackData),//callback, callback data (user)
0,// notificationFrames == 0 since not using EVENT_MORE_DATA to feed the AudioTrack
0,// shared mem
true,// thread can call Java
sessionId,// audio session ID
AudioTrack::TRANSFER_SYNC,
NULL, // default offloadInfo
-1, -1, // default uid, pid values
paa);
break;
case MODE_STATIC:
// AudioTrack is using shared memory
if (!lpJniStorage->allocSharedMem(buffSizeInBytes)) {
ALOGE("Error creating AudioTrack in static mode: error creating mem heap base");
goto native_init_failure;
}
status = lpTrack->set(
AUDIO_STREAM_DEFAULT,// stream type, but more info conveyed in paa (last argument)
sampleRateInHertz,
format,// word length, PCM
nativeChannelMask,
frameCount,
AUDIO_OUTPUT_FLAG_NONE,
audioCallback, &(lpJniStorage->mCallbackData),//callback, callback data (user));
0,// notificationFrames == 0 since not using EVENT_MORE_DATA to feed the AudioTrack
lpJniStorage->mMemBase,// shared mem
true,// thread can call Java
sessionId,// audio session ID
AudioTrack::TRANSFER_SHARED,
NULL, // default offloadInfo
-1, -1, // default uid, pid values
paa);
break;
default:
ALOGE("Unknown mode %d", memoryMode);
goto native_init_failure;
}status_t AudioTrack::set(
audio_stream_type_t streamType,
uint32_t sampleRate,
audio_format_t format,
audio_channel_mask_t channelMask,
size_t frameCount,
audio_output_flags_t flags,
callback_t cbf,
void* user,
int32_t notificationFrames,
const sp<IMemory>& sharedBuffer,
bool threadCanCallJava,
audio_session_t sessionId,
transfer_type transferType,
const audio_offload_info_t *offloadInfo,
int uid,
pid_t pid,
const audio_attributes_t* pAttributes,
bool doNotReconnect,
float maxRequiredSpeed)AudioTrack::set()调用之后的处理都较为简单，有一点需要注意的就是，这里会把创建的Native AudioTrack实例与Java AudioTrack进行关联：
setAudioTrack(env, thiz, lpTrack);//将Native AudioTrack的实例地址保存到Java AudioTrack::mNativeTrackInJavaObj字段中
static sp<AudioTrack> setAudioTrack(JNIEnv* env, jobject thiz, const sp<AudioTrack>& at)
{
Mutex::Autolock l(sLock);
sp<AudioTrack> old =
(AudioTrack*)env->GetLongField(thiz, javaAudioTrackFields.nativeTrackInJavaObj);
if (at.get()) {
at->incStrong((void*)setAudioTrack);
}
if (old != 0) {
old->decStrong((void*)setAudioTrack);
}
env->SetLongField(thiz, javaAudioTrackFields.nativeTrackInJavaObj, (jlong)at.get());
return old;
}
分析完该部分后，我们得到了一个重要的函数调用AudioTrack::set()。
三、native_start()
在创建完Java AudioTrack实例后，我们会调用play()函数准备进行播放了，最后会调用到native_start()函数，它对应的JNI实现是：
static void
android_media_AudioTrack_start(JNIEnv *env, jobject thiz)
{
sp<AudioTrack> lpTrack = getAudioTrack(env, thiz);
if (lpTrack == NULL) {
jniThrowException(env, "java/lang/IllegalStateException",
"Unable to retrieve AudioTrack pointer for start()");
return;
}
lpTrack->start();
}static sp<AudioTrack> getAudioTrack(JNIEnv* env, jobject thiz)
{
Mutex::Autolock l(sLock);
AudioTrack* const at =
(AudioTrack*)env->GetLongField(thiz, javaAudioTrackFields.nativeTrackInJavaObj);
return sp<AudioTrack>(at);
}
这里我们得到了一个重要的函数调用AudioTrack::start()。
四、native_write_byte()/native_write_short()
准备播放动作完成后，我们会向AudioTrack写入数据，它对应的JNI函数实现是：
// ----------------------------------------------------------------------------
static jint android_media_AudioTrack_write_native_bytes(JNIEnv *env, jobject thiz,
jbyteArray javaBytes, jint byteOffset, jint sizeInBytes,
jint javaAudioFormat, jboolean isWriteBlocking) {
//ALOGV("android_media_AudioTrack_write_native_bytes(offset=%d, sizeInBytes=%d) called",
// offsetInBytes, sizeInBytes);
sp<AudioTrack> lpTrack = getAudioTrack(env, thiz);
if (lpTrack == NULL) {
jniThrowException(env, "java/lang/IllegalStateException",
"Unable to retrieve AudioTrack pointer for write()");
return (jint)AUDIO_JAVA_INVALID_OPERATION;
}
ScopedBytesRO bytes(env, javaBytes);
if (bytes.get() == NULL) {
ALOGE("Error retrieving source of audio data to play, can't play");
return (jint)AUDIO_JAVA_BAD_VALUE;
}
jint written = writeToTrack(lpTrack, javaAudioFormat, bytes.get(), byteOffset,
sizeInBytes, isWriteBlocking == JNI_TRUE /* blocking */);
return written;
}// ----------------------------------------------------------------------------
template <typename T>
static jint writeToTrack(const sp<AudioTrack>& track, jint audioFormat, const T *data,
jint offsetInSamples, jint sizeInSamples, bool blocking) {
// give the data to the native AudioTrack object (the data starts at the offset)
ssize_t written = 0;
// regular write() or copy the data to the AudioTrack's shared memory?
size_t sizeInBytes = sizeInSamples * sizeof(T);
if (track->sharedBuffer() == 0) {//STREAM模式,要将数据一次次写入Native AudioTrack中
written = track->write(data + offsetInSamples, sizeInBytes, blocking);
// for compatibility with earlier behavior of write(), return 0 in this case
if (written == (ssize_t) WOULD_BLOCK) {
written = 0;
}
} else {//STATIC模式,直接将数据拷贝至共享内存中
// writing to shared memory, check for capacity
if ((size_t)sizeInBytes > track->sharedBuffer()->size()) {
sizeInBytes = track->sharedBuffer()->size();
}
memcpy(track->sharedBuffer()->pointer(), data + offsetInSamples, sizeInBytes);
written = sizeInBytes;
}
if (written >= 0) {
return written / sizeof(T);
}
return interpretWriteSizeError(written);
}
五、natvie_stop()
当我们将数据写入完毕、播放完成时，会调用stop函数停止AudioTrack的播放，此时该函数对应的JNI函数实现是：
// ----------------------------------------------------------------------------
static void
android_media_AudioTrack_stop(JNIEnv *env, jobject thiz)
{
sp<AudioTrack> lpTrack = getAudioTrack(env, thiz);
if (lpTrack == NULL) {
jniThrowException(env, "java/lang/IllegalStateException",
"Unable to retrieve AudioTrack pointer for stop()");
return;
}
lpTrack->stop();
}
六、native_release()
#define CALLBACK_COND_WAIT_TIMEOUT_MS 1000
static void android_media_AudioTrack_release(JNIEnv *env, jobject thiz) {
sp<AudioTrack> lpTrack = setAudioTrack(env, thiz, 0);
if (lpTrack == NULL) {
return;
}
//ALOGV("deleting lpTrack: %x\n", (int)lpTrack);
// delete the JNI data
AudioTrackJniStorage* pJniStorage = (AudioTrackJniStorage *)env->GetLongField(
thiz, javaAudioTrackFields.jniData);
// reset the native resources in the Java object so any attempt to access
// them after a call to release fails.
env->SetLongField(thiz, javaAudioTrackFields.jniData, 0);
if (pJniStorage) {
Mutex::Autolock l(sLock);
audiotrack_callback_cookie *lpCookie = &pJniStorage->mCallbackData;
//ALOGV("deleting pJniStorage: %x\n", (int)pJniStorage);
while (lpCookie->busy) {
if (lpCookie->cond.waitRelative(sLock,
milliseconds(CALLBACK_COND_WAIT_TIMEOUT_MS)) !=
NO_ERROR) {
break;
}
}
sAudioTrackCallBackCookies.remove(lpCookie);
// delete global refs created in native_setup
env->DeleteGlobalRef(lpCookie->audioTrack_class);
env->DeleteGlobalRef(lpCookie->audioTrack_ref);
delete pJniStorage;
}
}
到这里，AudioTrack JNI部分的分析就结束了，从上面的分析流程可以看出，之后的工作区间会在Native AudioTrack中。我们整理下分析过程结束后所涉及到的几个重要函数调用：
- AudioTrack::set()
- AudioTrack::start()
- AudioTrack::write()
- AudioTrack::stop(
所以，下一步，我们会进入Native AudioTrack空间，继续我们的分析流程。
5960
扫一扫
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
