connection is being used##server is in use and cannot be deleted

        mysql数据库被黑客挟持,删除我的数据库,让我用比特币来换,吓死我了,还好是测试库,删了就删了,数据库备份还得做好,密码不能设置太简单了。

下面是黑客留言:

"以下数据库已被删除:quartz_css。 我们有完整的备份。 要恢复它,您必须向我们的比特币地址bc1qzzgavg2cft0h6hplup5r27hnffluf2fk6famcw支付0.025比特币(BTC)。 如果您需要证明,请通过以下电子邮件与我们联系。 cheng8925@tutanota.com 。 任何与付款无关的邮件都将被忽略!"

一、为此,必须修改数据库密码,之前太简单了。下面列举修改密码的几种方式:

1.记得用户密码,进行修改

[root@localhost ~]# mysql -uroot -p
##输入密码
Enter password: 

##切换数据库
mysql> use mysql
##mysql5.7版本之前
mysql> UPDATE user SET Password = PASSWORD('你的新密码') WHERE User = 'root';
##mysql5.7版本之后
mysql> UPDATE user SET authentication_string = PASSWORD('你的新密码') WHERE User = 'root';
##刷新
mysql> flush privileges;

2.不记得root密码,设置免密登录修改

##1.停止MySQL服务
service mysql stop

##2.设置绕过密码登录
方法一:直接执行下面的命令
mysqld_safe --skip-grant-tables &

方法二:打开/etc/my.cnf 配置文件,在[mysqld]字段下添加一行 skip-grant-tables;如果没有这个配置文件,手动创建一个my.cnf,在其中添加下面两行
[mysqld]
skip-grant-tables

##3.免密登录
[root@localhost ~]# mysql
##切换数据库
mysql> use mysql
##mysql5.7版本之前
mysql> UPDATE user SET Password = PASSWORD('你的新密码') WHERE User = 'root';
##mysql5.7版本之后
mysql> UPDATE user SET authentication_string = PASSWORD('你的新密码') WHERE User = 'root';
##刷新
mysql> flush privileges;
##退出
mysql> exit;

##4.启动MySQL服务
service mysql start

这种方法修改成功后,记得把配置文件中的“skip-grant-tables” 去掉,重新启动服务。

二、修改完数据库密码

        修改完成后,使用navicat进行数据库重连,测试连接是“成功”,点确定时一直报错:

想着删除连接重新创建一个,又报错:

 我这里是关闭Navicat后,再次打开就可以删除了;

如果不能删除,可以参考下面的方法操作:

https://www.cnblogs.com/JerryTomcat/p/15627453.html

<?xml version="1.0" encoding="utf-8"?> <resources> <string name="error__6">Operation failed. Please try later.</string> <string name="error_263">No default tenant found, please contact service provider.</string> <string name="error__107">Failed to connect to the camera. Try again later.</string> <string name="error_004">Invalid email address.</string> <string name="error_006">Incorrect mobile number.</string> <string name="error_009">The phone number has already been registered once, please use another number or use this number to login.</string> <string name="error_010">Incorrect verification code.</string> <string name="error_011">The email address has been bound.</string> <string name="error_012">Failed to log in to the app. Please log in again.</string> <string name="error_018">Invalid application ID.</string> <string name="error_019">Invalid operation.</string> <string name="error_024">Invalid plug-in.</string> <string name="error_025">Operation failed. Please try later.</string> <string name="error_026">Plug-in does not exist.</string> <string name="error_027">Failed to log in to the app. Please log in again.</string> <string name="error_030">The terminal has been bound.</string> <string name="error_031">Operation failed. Please try later.</string> <string name="error_032">The terminal does not bind to this account.</string> <string name="error_033">Terminals are being operated by other users.</string> <string name="error_034">Operation failed. Please try later.</string> <string name="error_035">Failed to obtain the application list.</string> <string name="error_036">Failed to obtain the application image.</string> <string name="error_037">Failed to obtain the application version.</string> <string name="error_038">Failed to obtain the Wi-Fi coverage information.</string> <string name="error_040">The email address has not been bound to an account.</string> <string name="error_042">Operation failed. Please try later.</string> <string name="error_044">Operation failed. Please try later.</string> <string name="error_048">Operation failed. Please try later.</string> <string name="error_050">Operation failed. Please try later.</string> <string name="error_051">Operation failed. Please try later.</string> <string name="error_056">Configuration page query failed.</string> <string name="error_057">Operation failed. Please try later.</string> <string name="error_058">Plug-in list query failed.</string> <string name="error_059">Plug-in image query failed.</string> <string name="error_060">Operation failed. Please try later.</string> <string name="error_061">Operation failed. Please try later.</string> <string name="error_063">Invalid broadband account.</string> <string name="error_064">Operation failed. Please try later.</string> <string name="error_066">Invalid account type.</string> <string name="error_067">The password cannot be empty.</string> <string name="error_068">The confirmation password cannot be empty.</string> <string name="error_069">The account cannot be empty.</string> <string name="error_070">Incorrect PPPoE account.</string> <string name="error_072">The cloud account is empty.</string> <string name="error_073">Incorrect cloud account type.</string> <string name="error_075">The cloud account is registered.</string> <string name="error_076">The cloud account does not exist.</string> <string name="error_077">You have not bound any broadband account or gateway.</string> <string name="error_078">The MAC address of the device is not registered to the cloud platform. </string> <string name="error_081">The current binding relationship does not exist.</string> <string name="error_082">The user account does not exist.</string> <string name="error_087">Binding failed, No broadband account.</string> <string name="error_093">You have not bound any broadband account.</string> <string name="error_094">The number of gateways to be bound has reached the maximum. New gateways cannot be bound.</string> <string name="error_097">Broadband account verification is not currently available.</string> <string name="error_098">The device already exists.</string> <string name="error_099">The Wi-Fi SSID already exists.</string> <string name="error_100">The Wi-Fi SSID is empty.</string> <string name="error_101">The account is added.</string> <string name="error_103">The password will expire soon.</string> <string name="error_105">The user account is locked.</string> <string name="error_106">User login failed.</string> <string name="error_107">Exceeded the number limit of accounts that can be logged in at the same time.</string> <string name="error_108">Password complexity is invalid.</string> <string name="error_110">Incorrect mobile phone type.</string> <string name="error_111">The mobile phone version is empty.</string> <string name="error_112">Exceeded the password resetting limit in 24 hours.</string> <string name="error_113">Exceeded the number limit of security question attempts. The password resetting is locked.</string> <string name="error_114">Incorrect answer to the security question.</string> <string name="error_115">Invalid parameter for the security question.</string> <string name="error_116">Incorrect old password.</string> <string name="error_117">No plug-in version.</string> <string name="error_118">Incorrect password.</string> <string name="error_121">Invalid order number.</string> <string name="error_122">WO cloud account has been registered.</string> <string name="error_123">WO cloud account does not exist.</string> <string name="error_124">WO cloud client authentication failed.</string> <string name="error_133">Failed to join.</string> <string name="error_139">Only administrators have this permission.</string> <string name="error_144">The log file size exceeds 5 MB and cannot be uploaded.</string> <string name="error_145">Plug-in already exists.</string> <string name="error_146">Plug-in version already exists.</string> <string name="error_150">The log switch has been enabled.</string> <string name="error_151">The log switch has been disabled.</string> <string name="error_152">Failed to query third-party authentication information.</string> <string name="error_153">Failed to forward plug-in third-party authentication information.</string> <string name="error_154">Duplicate room name.</string> <string name="error_155">The message template cannot be left empty.</string> <string name="error_156">The message template does not exist.</string> <string name="error_157">The mapping SMS template does not exist.</string> <string name="error_158">The SMS gateway is unavailable.</string> <string name="error_159">The plug-in service name is left empty or does not exist.</string> <string name="error_160">The plug-in service code is left empty or does not exist.</string> <string name="error_161">The plug-in random code is left blank or does not exist.</string> <string name="error_162">The mobile number cannot be left empty.</string> <string name="error_163">Failed to connect to the SMS gateway.</string> <string name="error_164">Failed to bind the SMS gateway.</string> <string name="error_165">Failed to send the SMS message.</string> <string name="error_166">SMS sending timed out.</string> <string name="error_171">The email address for receiving an authentication code is not the email address of the administrator.</string> <string name="error_172">The format of the message notification switch is incorrect.</string> <string name="error_173">The user password of the storage service fails the verification.</string> <string name="error_174">Status of the gateway to which the user is bound is invalid.</string> <string name="error_175">The email server is not configured.</string> <string name="error_176">Failed to send the email.</string> <string name="error_184">Sender authentication on the email server failed.</string> <string name="error_185">Incorrect email address.</string> <string name="error_186">Operation failed. Please try later.</string> <string name="error_187">Operation failed. Please try later.</string> <string name="error_189">You do not have the permission to access the gateway.</string> <string name="error_192">This type of message is not currently supported by the SMS gateway.</string> <string name="error_193">Sessiontimeout must be specified if the speed-up interface oper_type is set to 0.</string> <string name="error_196">Image size too large.</string> <string name="error_197">Incorrect image format.</string> <string name="error_198">The plug-in software version is not available.</string> <string name="error_199">Mandatory parameter symbolicName not found.</string> <string name="error_200">The plug-in record is empty.</string> <string name="error_204">BSS is not configured.</string> <string name="error_205">Failed to register the cloud account.</string> <string name="error_209">Mandatory parameter #{field} is not carried or is left empty.</string> <string name="error_210">Invalid request format.</string> <string name="error_211">The password has expired.</string> <string name="error_212">The user is blocked.</string> <string name="error_213">The MAC address is not bound.</string> <string name="error_215">You have not purchased such type of device.</string> <string name="error_216">Failed to identify the device type.</string> <string name="error_217">The number of devices of this type exceeds the maximum allowed by the package.</string> <string name="error_218">The package has not been activated.</string> <string name="error_222">Cloud storage has not been configured on the web page.</string> <string name="error_226">The account is not bound to a mobile number.</string> <string name="error_227">The account is not bound to an email address.</string> <string name="error_228">The cloud storage parameters cannot be left empty.</string> <string name="error_230">Failed to create the temporary Amazon Cloud certificate.</string> <string name="error_231">The verification code has expired.</string> <string name="error_232">No profile image has been uploaded for the user.</string> <string name="error_233">The application has not been purchased.</string> <string name="error_234">Incorrect cloud storage configuration.</string> <string name="error_236">Failed to obtain the cloud token.</string> <string name="error_237">Non-current administrator to create sub-accounts</string> <string name="error_244">The mobile number cannot be used for login.</string> <string name="error_245">The email address cannot be used for login.</string> <string name="error_246">The account cannot be modified repeatedly.</string> <string name="error_248">The plug-in is the latest version.</string> <string name="error_249">The login has expired.</string> <string name="error_250">The plug-in is the latest version.</string> <string name="error_251">Users with no service provisioned cannot bind a gateway.</string> <string name="error_252">The mobile number bound to the new administrator does not match the number segment specified by the carrier.</string> <string name="error_253">The mobile phone number bound to the new administrator is not used.</string> <string name="error_254">The mobile phone number bound to the new administrator has been used.</string> <string name="error_256">Your account has been disabled.</string> <string name="error_1018">Your password has been reset, please set a new password on the cloud platform</string> <string name="error_30000001">Operation failed. Please try later.</string> <string name="error_30000101">The account already exists.</string> <string name="error_30000102">The account does not exist.</string> <string name="error_30000103">The new account already exists.</string> <string name="error_30000104">The mobile number already exists.</string> <string name="error_30000105">The email address already exists.</string> <string name="error_30000106">The package does not exist.</string> <string name="error_30000107">Product ID{#{field}} does not exist.</string> <string name="error_30000108">Incorrect email address format.</string> <string name="error_30000109">The password does not meet the complexity requirements. Enter a correct one.</string> <string name="error_30000110">The account is not an administrator account.</string> <string name="error_30000111">No gateway has been bound for the account.</string> <string name="error_30000112">Multiple gateways have been bound for the account.</string> <string name="error_30000113">The gateway bound to this account has been enabled for remote management.</string> <string name="error_30000114">The gateway bound to this account has suspended remote management</string> <string name="error_30000115">The package is not specified.</string> <string name="error_30000116">Failed to delete the storage service file.</string> <string name="error_30000121">Unknown northbound bundle operation.</string> <string name="error_30000122">The plug-in software version is not found.</string> <string name="error_30000123">The plug-in software version already exists.</string> <string name="error_30000124">Mandatory parameter symbolicName is not specified.</string> <string name="error_30000125">The plug-in record is empty.</string> <string name="error_30000126">The plug-in has been bound to an app.</string> <string name="error_30000127">The plug-in does not exist.</string> <string name="error_30000128">The format of the mobile number is incorrect.</string> <string name="error_30000129">A new account cannot be the same as the old account.</string> <string name="error_30000130">The password must be different from previous passwords.</string> <string name="error__1004">The service package is not available for use.</string> <string name="error__1008">The entered broadband account is inconsistent with the one used for dial-up access.</string> <string name="error__1011">The user is offline.</string> <string name="error__1012">Subscribed services have expired.</string> <string name="error__1014">The IP address is outside the IP address range that has access to smart speed-up.</string> <string name="error__1015">The remaining quota is zero.</string> <string name="error_2002">The room does not exist.</string> <string name="error_2003">The device SN does not exist.</string> <string name="error_2004">The device is already added.</string> <string name="error_2005">No such device service is purchased.</string> <string name="error_2006">The package is not activated.</string> <string name="error_2007">The number of devices exceeds the limit of package.</string> <string name="error_2008">The device name already exists.</string> <string name="error_10100502">The service is invalid.</string> <string name="error_10100503">The service has ceased.</string> <string name="error_10100505">The service package does not exist.</string> <string name="error_10100508">BOD services do not support accumulation.</string> <string name="error_10100509">No basic-bandwidth information is available to calculate the amount of additional BOD bandwidth required.</string> <string name="error_10100601">The service is not subscribed.</string> <string name="error_10100602">The service is in used.</string> <string name="error_10100604">The service is not in use and the acceleration does not need to be stopped.</string> <string name="error_999">Operation failed. Please try later.</string> <string name="error_999108">Operation failed. Please try later.</string> <string name="error_999100">Service cannot parse XML-request and detect necessary fields</string> <string name="error_999101">Account for requested login or contract number is not found (for methods like balance checking)</string> <string name="error_999102">The contract attachment of the requested number is not found.</string> <string name="error_999103">Service with the requested number is not found</string> <string name="error_999104">Wrong phone number format</string> <string name="error_999105">Wrong email format</string> <string name="error_999106">Password doesn\'t meet the requirements (too short, etc)</string> <string name="error_999107">Error of internal account identification</string> <string name="error_999200">Method is not supported or not currently available</string> <string name="error_999202">BSS returns an error indicating that changing the mobile phone number failed.</string> <string name="error_999203">BSS returns an error indicating that changing the email address failed.</string> <string name="error_999300">Error during internal request processing in billing system (it will be returned XML-structure with details of the error)</string> <string name="error_network_err">Connection timed out. Check your network connection.</string> <string name="error_40000002">The length exceeds the maximum limit.</string> <string name="error_40000005">The parameter value exceeds the maximum value.</string> <string name="error_40000006">The parameter value is less than the minimum value.</string> <string name="error_80010001">The scene name already exists.</string> <string name="error_80010002">The scene name is empty.</string> <string name="error_80010003">The scene contains non-existing or deleted devices.</string> <string name="error_80010004">The scene name does not exist.</string> <string name="error_80000001">The plug-in name is empty.</string> <string name="error_80000002">The data flag is empty.</string> <string name="error_80010005">The action of the device is empty.</string> <string name="error_80010006">The device type does not exist.</string> <string name="error_80011001">The app name does not exist.</string> <string name="error_80011002">The operation name is empty.</string> <string name="error_80011003">The service name does not exist.</string> <string name="error_80012001">The camera password is incorrect or locked.</string> <string name="error_80013001">More rooms are created than allowed.</string> <string name="error_80010007">Incorrect time format in the scheduled scene.</string> <string name="error_80010008">The action name is empty.</string> <string name="error_80010009">Name of trigger condition is empty.</string> <string name="error_1013">The MAC address of your gateway does not exist on the server.</string> <string name="logo_homeGatewayService.token.invalid">Your login has expired.</string> <string name="error_1014">The number of verification codes sent in your account has reached the maximum. Please try again tomorrow.</string> <string name="error_0x02163dc3">The number of same characters in a row in the password has exceeded the maximum.</string> <string name="error_0x02163dcc">Failed to input the correct old password.</string> <string name="error_0x02163dc1">The password does not meet requirements.</string> <string name="error_0x02163dc2">The length of the password does not meet requirements.</string> <string name="error_0x021639b8">The new password must contain at least two characters that are not used in the old password.</string> <string name="error_0x02163dc4">The password does not comply with the repetition policy.</string> <string name="error_0x02163dc6">The operation does not comply with the minimum modification time interval.</string> <string name="error_0035014004">Password entered incorrectly too many times, please wait %1$s minutes and try again.</string> <string name="error_276">The mobile number has been registered with another broadband service provider and cannot be invited.</string> <string name="error_across_tenant">The mobile number has been registered with another broadband service provider, so you cannot invite it.</string> <string name="error__11">Operation failed. Please try later.</string> <string name="error__12">Operation failed. Please try later.</string> <string name="error_HomeGatewayService_parameter_invalid">Incorrect request parameter.</string> <string name="error_HomeGatewayService_cmdtype_invalid">The current platform version does not support this function.</string> <string name="error_HomeGatewayService_service_invalid">Server error.</string> <string name="error_HomeGatewayService_homegateway_no_permission">You do not have permission to manage the gateway.</string> <string name="error_281">Failed to send the SMS message. Please contact your broadband service provider.</string> <string name="error_282">The server fails to send an SMS message because the mobile number is invalid.</string> <string name="error_283">The server fails to send an SMS message because the mobile number is invalid.</string> <string name="error_284">The server is busy sending SMS messages. Please try again later.</string> <string name="error_285">The server is busy sending SMS messages. Please try again later.</string> <string name="error_286">The server fails to send the SMS message because the content is invalid.</string> <string name="error_287">The server fails to send an SMS message because the number is in the blacklist.</string> <string name="error_288">The SMS message sent by the server contains sensitive words. Change your gateway remarks and try again.</string> <string name="error_0">Operation successful.</string> <string name="error_7">The gateway is busy and cannot process the current request. Try again later.</string> <string name="error__1">Operation failed. Please try later.</string> <string name="error__2">Network request timed out.</string> <string name="error__36">The Wi-Fi service has been disabled.</string> <string name="error__100">Failed to assign transit server port. Try again</string> <string name="error__101">Failed to connect to the transit server. Check if the server is online.</string> <string name="error__105">Failed to obtain the video service address of the camera</string> <string name="error__108">User authentication failed</string> <string name="error__202">When MLO is enabled, the authentication mode must be WPA2, WPA3, or WPA2/WPA3.</string> <string name="error_001">Duplicate username.</string> <string name="error_002">Passwords don’t match.</string> <string name="error_003">Incorrect username or password.</string> <string name="error_005">The length of the password does not meet requirements.</string> <string name="error_007">The username cannot be empty.</string> <string name="error_008">Duplicate nickname.</string> <string name="error_013">Incorrect username or password.</string> <string name="error_014">Exceeded the maximum number of terminals bound to the current account.</string> <string name="error_015">Exceeded the maximum number of accounts bound to this terminal.</string> <string name="error_016">No smart ONT has been bound</string> <string name="error_020">The gateway is offline.</string> <string name="error_021">You do not have the permission to access the gateway.</string> <string name="error_022">The gateway is not registered.</string> <string name="error_023">The username does not exist.</string> <string name="error_029">No terminal is bound to this account.</string> <string name="error_039">The mobile number has not been bound to an account.</string> <string name="error_041">Failed to modify the password: The old password is entered incorrectly.</string> <string name="error_043">The gateway connection timed out. Try again later or check whether the gateway network is connected.</string> <string name="error_045">Operation failed. Please try later.</string> <string name="error_046">Operation failed. Please try later.</string> <string name="error_047">Failed to obtain the device control list.</string> <string name="error_049">Exceeded the maximum number of controllable devices.</string> <string name="error_052">The gateway is not registered.</string> <string name="error_053">Device control is not supported.</string> <string name="error_054">Operation failed. Please try later.</string> <string name="error_055">Unknown error occurred on the device control template.</string> <string name="error_065">Problem description cannot be empty.</string> <string name="error_071">Not a smart gateway.</string> <string name="error_079">Operation failed: the gateway has been unbound.</string> <string name="error_080">Operation failed: the current account has not joined.</string> <string name="error_083">Operation failed. Please try later.</string> <string name="error_084">A non-invite user cannot modify the remarks.</string> <string name="error_085">Unbinding failed. Please try again later.</string> <string name="error_086">Devices exist in the room.</string> <string name="error_088">This app does not support non-smart gateways.</string> <string name="error_089">Binding failed. Please try again later.</string> <string name="error_090">Binding failed. Please try again later.</string> <string name="error_091">Binding failed. Please try again later.</string> <string name="error_092">The number of invited users has exceeded the upper limit.</string> <string name="error_095">Deletion failed. The last user cannot be deleted.</string> <string name="error_096">The list of network users to be deleted is empty.</string> <string name="error_102">The new password cannot be the same as any previous password.</string> <string name="error_104">The password has expired.</string> <string name="error_109">The greeting message is empty.</string> <string name="error_119">The room name cannot be empty.</string> <string name="error_120">The room ID cannot be empty.</string> <string name="error_125">The username does not meet the complexity requirements. Enter a correct one.</string> <string name="error_126">The username cannot be empty.</string> <string name="error_127">The username does not meet the complexity requirements. Enter a correct one.</string> <string name="error_128">No mobile number is bound.</string> <string name="error_129">This mobile number is not a administrator account.</string> <string name="error_130">The mobile number must be a Bahraini number.</string> <string name="error_131">The mobile number has been bound.</string> <string name="error_132">No phone number is bound to the current account.</string> <string name="error_134">Administrators cannot leave.</string> <string name="error_135">The mobile number is not bound to any account.</string> <string name="error_136">The login has expired.</string> <string name="error_140">The device has been updated to the latest version.</string> <string name="error_141">No new version is available.</string> <string name="error_143">Incorrect log file format.</string> <string name="error_147">The gateway is being upgraded.</string> <string name="error_148">The phone number has already been registered once, please use another number or use this number to login.</string> <string name="error_149">Duplicate room name.</string> <string name="error_167">Operation failed. Please try later.</string> <string name="error_168">Starting the plug-in…</string> <string name="error_169">Stopping the plug-in…</string> <string name="error_170">Uninstalling the plug-in…</string> <string name="error_188">The gateway does not exist.</string> <string name="error_190">You do not have access to this gateway.</string> <string name="error_191">The message push type is empty or of an incorrect format.</string> <string name="error_194">Operation failed. Please try later.</string> <string name="error_195">You cannot invite other network members to join.</string> <string name="error_LHConsumerService_login_accountRoleMismatch">Members from other enterprises are not allowed.</string> <string name="error_LHConsumerService_bindGroup_exceedMaxBindGroupNum">Members from other enterprises are not allowed.</string> <string name="error_201">Failed to check the remaining balance.</string> <string name="error_202">Failed to change the mobile number.</string> <string name="error_203">Failed to change the email address.</string> <string name="error_214">Incorrect addedDeviceList format.</string> <string name="error_219">The password cannot be the same as the username or the username in reverse.</string> <string name="error_220">You do not have the administrative permission.</string> <string name="error_221">Failed to uninstall all the plug-ins of the home gateway.</string> <string name="error_224">The new gateway is not registered.</string> <string name="error_225">The new home gateway has been bound.</string> <string name="error_238">Your account has not been bound with a mobile number or email address. The password cannot be retrieved through self service. You are advised to contact your administrator to retrieve the password.</string> <string name="error_239">The mobile number is bound to multiple accounts.</string> <string name="error_240">The email address is bound to multiple accounts.</string> <string name="error_247">Anonymous binding information cannot be queried by using a mobile number or an email address.</string> <string name="error_255">The account has been bound to a gateway, and cannot be bound to another one.</string> <string name="error_272">Incorrect username or password.</string> <string name="error_1002">The interval between requests for sending verification codes is too short.</string> <string name="error_30000117">The home gateway MAC address does not exist.</string> <string name="error_30000118">The home gateway is offline.</string> <string name="error_30000119">The home gateway plug-in does not exist.</string> <string name="error_30000120">The plug-in is not installed or not upgraded on the home gateway.</string> <string name="error__1013">The MAC address (XXX) of your gateway does not exist on the server.</string> <string name="error_2001">The input parameter is empty.</string> <string name="error_40000001">The parameter contains unsupported special characters.</string> <string name="error_40000003">The length is less than the minimum limit.</string> <string name="error_40000004">The parameter is not a numeric type.</string> <string name="error_40000007">Invalid IP address.</string> <string name="net_conn_failed">Connection failed.</string> <string name="error__3">Connection failed.</string> <string name="error__4">The gateway is busy and cannot process the current request. Try again later.</string> <string name="error__5">Operation failed. Please try later.</string> <string name="error__7">Operation failed. Please try later.</string> <string name="error__8">Not supported by the gateway.</string> <string name="error__9">Operation failed. Please try later.</string> <string name="error__10">Your login has expired. Please log in again.</string> <string name="error_280">Failed to send the SMS message. Please try again later.</string> <string name="error_300">The current server version does not support user name registration.</string> <string name="error__102">Camera offline or camera connection failed. Check if the camera is powered on.</string> <string name="error__104">Camera video service address illegal, please report impaired</string> <string name="error__106">Gateway cannot connect to the transit server. Check if the server is online.</string> <string name="error__200">Reached the upper limit.</string> <string name="error__201">When MLO is enabled, the working mode must be 802.11be.</string> <string name="error__203">Saving Wi-Fi settings. Please wait.</string> <string name="error__204">Incorrect request parameter.</string> <string name="error__205">The Wi-Fi frequency band is not enabled. Enable it first.</string> <string name="error__301">Fails to play the real-time video of the camera. Failed to connect to the gateway locally.</string> <string name="error__330">Application control is not enabled. Please enable it first.</string> <string name="error__331">The number of application control policies has reached the upper limit.</string> <string name="error__332">The app control rule does not exist.</string> <string name="error__622">The rate limit periods cannot overlap with each other.</string> <string name="error_028">Your account has been used for login on another device. If this was done without your knowledge, your account and password may have been compromised. Choose Settings > Account And Security to change your account password.</string> <string name="error_2009">Failed to query the package status.</string> <string name="error__99999">Operation failed. Please try later.</string> <string name="error_1017">The MAC address cannot be empty.</string> <string name="error_licence_expire">Licence expired, please contact service provider.</string> <string name="LHConsumerService.bindLocalAccount.hasFamily">The account is already in a family.</string> <string name="LHConsumerService.bindLocalAccount.bound">Already bound to another account.</string> <string name="LHConsumerService.weakvalue.error">The password is too simple.</string> <string name="error_LHConsumerService_feedback_daylimit">The number of problems you reported has reached the upper limit. Try again 24 hours later.</string> <string name="error_306">Failed to send the verification code.The possible cause is that the mobile number format is incorrect or the mobile number has been bound.</string> <string name="error_307">Failed to send the verification code.The possible cause is that the email address format is incorrect or the email address has been bound.</string> <string name="error_308">Failed to send the verification code.The possible cause is that the mobile number format is incorrect or the mobile number is not bound.</string> <string name="error_309">Failed to send the verification code.The possible cause is that the email address format is incorrect or the email address is not bound.</string> <string name="error_310">The client IP address is locked,please try again later.</string> <string name="error_311">The current version does not support multi-factor authentication. Contact the administrator to disable multi-factor authentication.</string> <string name="error__340">The portal function has been enabled. The speed limit cannot be configured. To set the rate limit, disable Portal authentication on the web management page of the gateway.</string> <string name="error_AppSdk_notInitialized">Failed to initialize the app. Please log in again.</string> <string name="error_log_collect_offline">Device is offline</string> <string name="error_log_collect_conflict">Another collection task of the device is in progress.</string> <string name="error_log_collect_failed">Log collection failed</string> <string name="LHConsumerService.domainMigration.notSupportBinding">The server has been switched. Please switch to the corresponding region and register again.</string> <string name="error__41">Failed to set the 5G Wi-Fi because it has been locked. Contact your carrier to enable it first.</string> <string name="error__14">The same Wi-Fi SSID already exists in the current frequency band.</string> <string name="BindGateway_101">You have joined a family. Please refresh the home page and view it.</string> <string name="error_third_platform_user">Third-party users exist, unbinding failed.</string> </resources>
06-11
我前面已经给你发了httpd模块和onvif模块中与GROUP_ONVIF_HTTPS相关的代码,包括httpd.c、httpd.h、http_utils.c、http_parser.c、onvif_srv.c、soap_pack.c、soap_event.c、soap_tev.c、soap_tds.c,onvif模块原来只支持http,但是我给它添加了onvif over https支持,由于我的修改有问题,导致事件订阅部分功能出问题,目前我在使用onvif官方测试工具进行测试时,发现了2个bug: 1、事件服务测real_time_pull_point notification interface接口时一直报错"the operation is only allowed use a successtully aauthenticated context" 测试信息如下: EVENT-3-1-15-v14.12 REALTIME PULLPOINT SUBSCRIPTION - PULLMESSAGES STEP 1 - Get Event service address StepStart: 2025-10-22T08:04:55.5586171Z Transmit done Receive done STEP PASSED STEP 2 - Get Event Properties StepStart: 2025-10-22T08:04:55.8650364Z Transmit done Receive done STEP PASSED Timeout of 60 seconds will be used STEP 3 - Create Pull Point Subscription StepStart: 2025-10-22T08:04:56.1667107Z Transmit done Receive done STEP PASSED STEP 4 - Check that TerminationTime is specified StepStart: 2025-10-22T08:04:56.3664914Z STEP PASSED STEP 5 - Check that TerminationTime and CurrentTime has reasonable values StepStart: 2025-10-22T08:04:56.3679861Z STEP PASSED STEP 6 - Validate CurrentTime and TerminationTime StepStart: 2025-10-22T08:04:56.3692768Z STEP PASSED STEP 7 - Check if the DUT returned SubscriptionReference StepStart: 2025-10-22T08:04:56.3705465Z STEP PASSED STEP 8 - Check if SubscriptionReference contains address StepStart: 2025-10-22T08:04:56.371947Z STEP PASSED STEP 9 - Check that URL specified is valid StepStart: 2025-10-22T08:04:56.3736841Z STEP PASSED STEP 10 - Send PullMessages request StepStart: 2025-10-22T08:04:56.3798843Z This operation is only allowed using a successfully authenticated context. STEP FAILED STEP 11 - Delete Subscription Manager StepStart: 2025-10-22T08:04:56.4714134Z Send unsubscribe request Failed to unsubscribe through request. Error received: This operation is only allowed using a successfully authenticated context. Wait until Subscription Manager is deleted by timeout STEP PASSED TEST FAILED 协议规范: Test Case ID: EVENT-3-1-15 Specification Coverage: CreatePullPointSubscription, SetSynchronizationPoint, PullMessages Feature Under Test: CreatePullPointSubscription, SetSynchronizationPoint, PullMessages WSDL Reference: event.wsdl Test Purpose: To verify PullMessages command Pre-Requisite: Event Service is supported by the DUT. Device supports Pull-Point Notification feature. The DUT shall provide at least one event. The test operator has to ensure that the event is triggered and sent out. ONVIF Client will invoke a SetSynchronizationPoint request. If the device does not support property events or if it is not possible to invoke a SetSynchronizationPoint, the test operator has to trigger event manually. Test Configuration: ONVIF Client and DUT Test Procedure: Start an ONVIF Client. Start the DUT. ONVIF Client will invoke CreatePullPointSubscription request with a suggested timeout of PT60S. Verify that the DUT sends a CreatePullPointSubscriptionResponse message. Validate that correct values for CurrentTime and TerminationTime and SubscriptionReference are returned. ONVIF Client will invoke PullMessages command with a PullMessagesTimeout of 20s and a MessageLimit of 2. ONVIF Client will invoke SetSynchronizationPoint request to trigger an event. Verify that the DUT sends a SetSynchronizationPointResponse message. If the DUT does not support property events, the operator has to trigger an event manually. Verify that the DUT sends a PullMessagesResponse that contains at least one NotificationMessage that represents a property. Verify NotificationMessage (a maximum number of 2 Notification Messages is included in the PullMessagesResponse message; well formed and valid values for CurrentTime and TerminationTime (TerminationTime > CurrentTime). Test Result: PASS – DUT passes all assertions. FAIL – The DUT did not send CreatePullPointSubscriptionResponse message. The DUT did not send valid values for CurrentTime and TerminationTime (TerminationTime > CurrentTime). The DUT did not send a SetSynchronizationPointResponse message. The DUT did not send a PullMessagesResponse message. The PullMessagesResponse message does not contain a NotificationMessage. The PullMessagesResponse message contains more than 2 NotificationMessages. The NotificationMessages are not well formed. The PullMessagesResponse message contains invalid values for Current or TerminationTime. The DUT did not send a PullMessagesFaultResponse message. The DUT did not send valid WS-Addressing Action URI in SOAP Header for CreatePullPointSubscriptionResponse message (see [Annex A.3](file:///D:/New Folder/Docs/Specifications/EVENT.html#Annex_ActionURIsForEventServiceMessages)). The DUT did not send valid WS-Addressing Action URI in SOAP Header for SetSynchronizationPointResponse message (see [Annex A.3](file:///D:/New Folder/Docs/Specifications/EVENT.html#Annex_ActionURIsForEventServiceMessages)). The DUT did not send valid WS-Addressing Action URI in SOAP Header for PullMessagesResponse message (see [Annex A.3](file:///D:/New Folder/Docs/Specifications/EVENT.html#Annex_ActionURIsForEventServiceMessages)). Note: The Subscription Manager has to be deleted at the end of the test either by calling unsubscribe or through a timeout. Note: It may be possible that some other events than the event which is being verified will be sent as PullMessages response during this test case. In such case, ONVIF Client should simply discard such response and they retry PullMessages request for the very event for verification. Note: During test case execution, it should be guaranteed that the DUT should not delete the property event which is being used for verification. Note: If DUT cannot accept the set value to Timeout or MessageLimit, ONVIF Client retries to send the PullMessage message with Timeout and MessageLimit which is contained in PullMessagesFaultResponse message. Note: See [Annex A.1](file:///D:/New Folder/Docs/Specifications/EVENT.html#Annex_subscribe_example) for instructions on how to construct Subscribe when it is required for the ONVIF Client to receive all events supported by the DUT. 2、basic notification interface接口测试时报错“The HTTP request has exceeded the allotted timeout” 测试信息如下: EVENT-2-1-9-v14.12 BASIC NOTIFICATION INTERFACE - SUBSCRIBE STEP 1 - Get Event service address StepStart: 2025-10-22T08:08:20.8360075Z Transmit done Receive done STEP PASSED STEP 2 - Creating listening server StepStart: 2025-10-22T08:08:24.2967735Z STEP PASSED STEP 3 - Send Subscribe request StepStart: 2025-10-22T08:08:24.3040478Z Transmit done The HTTP request has exceeded the allotted timeout STEP FAILED TEST FAILED 协议规范: Test Case ID: EVENT-2-1-9 Specification Coverage: Basic Notification Interface Feature Under Test: Subscribe WSDL Reference: event.wsdl Test Purpose: To verify DUT Subscribe command. Pre-Requisite: Event Service is supported by the DUT. Test Configuration: ONVIF Client and DUT Test Procedure: Start an ONVIF Client. Start the DUT. ONVIF Client will invoke Subscribe request to instantiate a Subscription Manager. The Subscribe request does not contain a TopicExpression or a Message Content Filter. The Message contains an InitialTerminationTime of 10s to ensure that the Subscription is terminated after end of this test. Verify that the DUT sends SubscribeResponse message. Verify that a valid SubscriptionReference is returned (valid EndpointReference); verify that valid values for CurrentTime and TerminationTime are returned (TerminationTime >= CurrentTime + InitialTerminationTime). Test Result: PASS – DUT passes all assertions. FAIL – The DUT did not send SubscribeResponse message. The DUT did not return a valid SubscriptionReference. The DUT did not return valid values for CurrentTime and TerminationTime. The DUT did not send valid WS-Addressing Action URI in SOAP Header for SubscribeResponse message (see [Annex A.3](file:///D:/New Folder/Docs/Specifications/EVENT.html#Annex_ActionURIsForEventServiceMessages)). Note: The Subscription Manager has to be deleted at the end of the test either by calling unsubscribe or through a timeout. Note: If the DUT cannot accept the set value to an InitialTerminationTime, ONVIF Client retries to send the Subscribe request with MinimumTime value included in UnacceptableInitialTerminationTimeFault. ——请根据代码分析原因,不能分析出详细原因的请给出调试方法
最新发布
10-23
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值