[oracle@rac2 ~]$ uname -r
2.6.9-5.EL
oracle 9.2.0.6
两节点rac1,rac2
安装cluster ware,database software均很顺利
但在dbca的时候出问题
gsd两个节点只有其中一个节点起来,
[oracle@rac2 ~]$ gsdctl start
Successfully started GSD on local node--这里能起来,但gsdctl stat后显示停了
[oracle@rac2 ~]$ gsdctl stat
GSD is not running on the local node
这个时候节点一正常
[oracle@rac1 ~]$ gsdctl start
Successfully started GSD on local node
[oracle@rac1 ~]$ gsdctl stat
GSD is running on the local node
[oracle@rac1 ~]$
还有个现象就是,机器重起后,节点一起来后马上停止,节点二正常
[oracle@rac1 ~]$ gsdctl start
Successfully started GSD on local node--这里能起来,但gsdctl stat后显示停了
[oracle@rac1~]$ gsdctl stat
GSD is not running on the local node
[oracle@rac2 ~]$ gsdctl start
Successfully started GSD on local node
[oracle@rac2 ~]$ gsdctl stat
GSD is running on the local node
再重起后,节点一正常,节点二不正常...
[ 本帖最后由 microsoft_fly 于 2009-9-20 14:01 编辑 ]
2.6.9-5.EL
oracle 9.2.0.6
两节点rac1,rac2
安装cluster ware,database software均很顺利
但在dbca的时候出问题
gsd两个节点只有其中一个节点起来,
[oracle@rac2 ~]$ gsdctl start
Successfully started GSD on local node--这里能起来,但gsdctl stat后显示停了
[oracle@rac2 ~]$ gsdctl stat
GSD is not running on the local node
这个时候节点一正常
[oracle@rac1 ~]$ gsdctl start
Successfully started GSD on local node
[oracle@rac1 ~]$ gsdctl stat
GSD is running on the local node
[oracle@rac1 ~]$
还有个现象就是,机器重起后,节点一起来后马上停止,节点二正常
[oracle@rac1 ~]$ gsdctl start
Successfully started GSD on local node--这里能起来,但gsdctl stat后显示停了
[oracle@rac1~]$ gsdctl stat
GSD is not running on the local node
[oracle@rac2 ~]$ gsdctl start
Successfully started GSD on local node
[oracle@rac2 ~]$ gsdctl stat
GSD is running on the local node
再重起后,节点一正常,节点二不正常...
[ 本帖最后由 microsoft_fly 于 2009-9-20 14:01 编辑 ]
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/751051/viewspace-731743/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/751051/viewspace-731743/
在Oracle9.2.0.6环境下,两节点RAC集群安装Clusterware及Database Software顺利,但在使用DBCA配置时遇到GSD仅在一个节点上成功启动的问题。重启后,该现象交替出现在两个节点。
750

被折叠的 条评论
为什么被折叠?



