Wince 5 PCMCIA as boot device-优快云博客

本文详细介绍了如何在注册表中添加特定信息以配置启动变量，如设置默认用户、系统存储管理器、磁盘驱动等，使得在系统启动时能够自动加载指定的设置。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

添加如下信息到project.reg：
; HIVE BOOT SECTION
[HKEY_LOCAL_MACHINE/init/BootVars]
"SYSTEMHIVE"="Documents and Settings//system.hv"
"PROFILEDIR"="Documents and Settings"
"Start DevMgr"=dword:1
"Registryflags"=dword:1
[HKEY_LOCAL_MACHINE/init/BootVars]
"DefaultUser"="default"
[HKEY_LOCAL_MACHINE/System/StorageManager/FATFS]
"FriendlyName"="FAT FileSystem"
"Dll"="fatfsd.dll"
"Flags"=dword:00000064
"Paging"=dword:1
"EnableCache"=dword:1
"CacheSize"=dword:0
"Util"="fatutil.dll"
"CacheDll"="diskcache.dll"
[HKEY_LOCAL_MACHINE/Drivers/PCMCIA/ATADisk]
"Dll"="ATADISK.DLL"
"Prefix"="DSK"
"Ioctl"=dword:4
"Profile"="PCMCIA"
; Indicate we are a power manageable interface and a storage driver
"IClass"=multi_sz:"{8DD679CE-8AB4-43c8-A14A-EA4963FAA715}","{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"
[HKEY_LOCAL_MACHINE/Drivers/PCMCIA/Detect/50]
"Dll"="ATADISK.DLL"
"Entry"="DetectATADisk"
[HKEY_LOCAL_MACHINE/System/StorageManager/Profiles/HDProfile]
"MountAsRoot"=dword:1
[HKEY_LOCAL_MACHINE/System/StorageManager/Profiles/HDProfile]
"MountAsBootable"=dword:1
[HKEY_LOCAL_MACHINE/System/StorageManager/Profiles/HDProfile]
"Name"="IDE Hard Disk Drive"
"Folder"="hard disk"
[HKEY_LOCAL_MACHINE/System/StorageManager/Profiles/HDProfile/FATFS]
"EnableCacheWarm"=dword:0
; END HIVE BOOT SECTION
结果就OK了！ Documents and Settings这个文件夹就出现在了Hard disk1 的下面了！

阅读(460) | 评论(0) | 转发(0) |

上一篇：Win CE/Mobile Physical/Virtual cached/uncached

下一篇：mkfs.jffs2指定dev table文件创建rootfs