linux 更改yum地址

本文介绍如何通过更换CentOS的YUM源为国内镜像站点来提高更新速度。推荐使用中国科技大学提供的镜像站点,并详细展示了如何修改配置文件以实现这一目的。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

很多人选择CentOS源于他的开源、免费、可升级。我选择他最看重最后一点---可升级。开源不用说,linux嘛;免费,哈我是一个提倡盗版者;可升级这点可就是CentOS的绝对优势了,你可以像使用正版红帽一样!I love Red Hat,So I love CentOS.
闲话少叙,奔主题。使用yum安装软件,升级系统是非常方便的。但如果网速不行,或在学校(就像首师大)访问国外网成问题的,升级起来慢死。这样,最好更改yum镜像站点为中国站点地址,这里推荐[url]http://centos.ustc.edu.cn/centos/[/url]。中国科技大学的镜像站点。(瞧人家多NB,人家那也是大学,再看...)。
修改/etc/yum.repos.d/CentOS-Base.repo
如下:
# CentOS-Base.repo
#
# This file uses a new mirrorlist system developed by Lance Davis for CentOS.
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#

[base]
name=CentOS-$releasever - Base
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
baseurl=http://centos.ustc.edu.cn/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-5

#released updates
[updates]
name=CentOS-$releasever - Updates
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
baseurl=http://centos.ustc.edu.cn/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-5

#packages used/produced in the build but not released
[addons]
name=CentOS-$releasever - Addons
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=addons
baseurl=http://centos.ustc.edu.cn/centos/$releasever/addons/$basearch/
gpgcheck=1
gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-5

#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
baseurl=http://centos.ustc.edu.cn/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-5

#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
baseurl=http://centos.ustc.edu.cn/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-5

简单的说就是把mirrorlist注释掉,将baseurl改成ustc.edu.cn的镜像地址。
<think>好的,用户的问题是关于如何在Linux中修Yum源的地址。我需要先回忆一下Yum源的基本知识以及相关的配置步骤。Yum源在Linux系统中用于管理软件包的安装和更新,通常配置在/etc/yum.repos.d/目录下的.repo文件中。用户可能需要更换源地址的原因包括提高下载速度、使用本地镜像或者解决依赖问题。 首先,用户可能需要备份现有的源配置文件,这是一个常见的步骤,避免配置错误后无法恢复。根据引用[2]和[4],用户需要进入/etc/yum.repos.d/目录,可能使用wget下载新的源文件,或者直接编辑现有的CentOS-Base.repo文件。比如,引用[2]提到下载网易的源配置文件,而引用[4]则使用vi编辑该文件。 另外,引用[3]提到本地Yum源的配置,适用于无网络的情况,需要挂载镜像文件。这可能也是用户的一个需求,但当前问题主要是修网络源地址,所以可能需要分情况说明。 接下来,我需要整理步骤:1. 备份原有源;2. 下载或编辑新的源配置文件;3. 清理缓存;4. 测试更新。同时,要确保用户知道如何选择适合自己发行版版本的源,比如CentOS 6或7的不同镜像地址。 可能遇到的问题包括权限不足,需要使用sudo或root权限;配置文件格式错误导致Yum无法识别;或者网络问题导致无法下载新的源文件。需要提醒用户检查这些点。 最后,生成相关问题时要覆盖本地源配置、常见错误处理、不同镜像源的比较以及恢复默认源的方法,这样用户能找到更多相关信息。</think>### 如何在Linux下修Yum地址 #### 步骤1:备份原有Yum源配置文件 在修前,建议备份默认Yum源文件,防止配置错误时无法恢复: ```bash cd /etc/yum.repos.d/ mkdir backup mv *.repo backup/ ``` #### 步骤2:下载或创建新的Yum源文件 根据Linux发行版版本选择镜像源。以CentOS为例: 1. **直接下载镜像站提供的配置文件**(如网易源): ```bash wget http://mirrors.163.com/.help/CentOS7-Base-163.repo # CentOS 7示例[^2] ``` 若网络不可用,需手动编辑`.repo`文件(参考步骤3)。 2. **手动编辑配置文件**: ```bash vi /etc/yum.repos.d/CentOS-Base.repo # 修`baseurl`字段为镜像地址[^4] ``` 示例配置片段: ```ini [base] name=CentOS-$releasever - Base baseurl=http://mirrors.163.com/centos/$releasever/os/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7 ``` #### 步骤3:清理并更新Yum缓存 执行以下命令使配置生效: ```bash yum clean all # 清除旧缓存 yum makecache # 生成新缓存 yum update # 测试新源是否可用 ``` #### 步骤4:验证配置 检查软件仓库列表: ```bash yum repolist # 显示已启用的仓库信息[^1] ``` #### 注意事项 - **镜像兼容性**:需确保镜像源与系统版本(如CentOS 7/8)匹配。 - **本地源配置**:若需使用本地镜像,需挂载ISO文件并修`baseurl`为本地路径(如`file:///mnt`)[^3]。 - **网络权限**:下载配置文件时需确保系统可访问外部网络。 --- ### 相关问题 1. **如何配置本地Yum源以实现离线安装软件?**[^3] 2. **Yum执行`makecache`时报错“无法解析主机”应如何排查?** 3. **国内常用的Yum镜像源有哪些?如何选择最佳源?** 4. **误删Yum配置文件后如何恢复默认源?**
评论 1
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值