Difference between FieldEdit and FieldChange events

最新推荐文章于 2019-05-21 10:24:09 发布
转载 最新推荐文章于 2019-05-21 10:24:09 发布 · 397 阅读 · 0
文章标签：

#events #validation #system

Field Change PeopleCode is for recalculating field values based on changes made to other fields. For instance, suppose you have 2 fields, rate and quantity and there is another field which shows total cost. Whenever a value is changed in either of the two fields, rate and quantity, the total cost will also change. So on the field change event of those two fields, you can write code to calculate the total cost.

Field edit event is used for validating field values. If the field doesn't pass the validation, an error message is shown and the page is redisplayed with that field marked in red. For instance, if you do not want a certain quantity to exceed 1,000 and it does, the system should display an error. You can write PeopleCode that will check the quantity, if it is greater than 1000 an error message will be displayed. 
peoplesoft笔记
qq_39923001的博客
10-21 1518
PeopleCode 语言结构 本主题假定您熟悉一种编程语言，例如 C、Visual Basic 或 Java。 在其基础上，PeopleCode 语法类似于其他编程语言。但是，PeopleCode 语言的某些方面与 PeopleTools 环境特别相关。例如，定义名称引用使您能够在不使用硬编码字符串文字的情况下引用 PeopleTools 定义，例如记录定义或页面。其他语言特性，如 PeopleCode 数据类型和元字符串，反映了 PeopleTools 和 SQL 的密切交互。PeopleCode 中的
Defining PeopleCode Events
个人学习记录所用
11-01 578
Every PeopleCode program is associated with a PeopleSoft Application Designer definition and with an event. Events are predefined exit points in the component processor flow. As each point is encounte
PeopleCode Events
jl19880317的专栏
11-19 815
PeopleCode Events Overview If you are reading this, you are probably familiar with creating fields, records, pages, components, and menus. With these objects alone, you can create working developm
The only Peoplecode events you should be using
个人学习记录所用
12-15 965
The only Peoplecode events you should be using When designing pages and components in PeopleTools, there are many different peoplecode events that you can use. In fact, there are too many options. We
Extending SmartHire (Template Based Hire) with custom Field Change & Field Prompt Events
个人学习记录所用
07-19 1352
Extending SmartHire (Template Based Hire) with custom Field Change & Field Prompt Events   ‘Hiring new employees or adding contingent workers into the system is one of the most time-consuming ta
Using Push Buttons and Hyperlinks
个人学习记录所用
08-04 823
Using Push Buttons and Hyperlinks   I thought I would take the time to write out some of the capabilities of using a Push Button or a Hype
get lightning object layout by current user and recordtypeid
salesforce 菜鸟
05-21 543
目录 应用场景 参数说明 缺点限制 展示页面示例 组件源码 Page getSessionId.page Controller ResponseBody.cls GetRecordLayout.cls Aura ElementChangeEvent.evt GetRecordLayout.cmp GetRecordLayout.css GetRecordLayoutC...
Problems with Component Interface and COBOL remotecalls
David Tech Lab
02-18 158
Unfortunately, Peoplesoft still uses COBOL throughout the by Text-Enhance" style="text-decoration:underline"> application. Even worse there can be online components that call COBOLs from the compon
jQuery FieldChange 插件：表单状态变化检测与回调
### jQuery-fieldchange插件知识点详解 #### 1. jQuery插件概述 jQuery是一个快速、小巧、功能丰富的JavaScript库，它通过简化HTML文档遍历和事件处理、DOM操作、动画和Ajax交互，使得Web开发变得更加容易。jQuery...
peoplesoft peoplecode PPT
04-14
- **FieldEdit** 与 **FieldChange**：FieldEdit 在字段值改变前触发，适合做验证；FieldChange 在值改变后触发，用于处理结果。 - **SaveEdit**、**SavePreChange** 和 **SavePostChange**：SaveEdit 用于保存前...
PeopleSoft activate阶段是否支持执行 UPDATE 操作？
07-16
> - 实时响应 → 用 **FieldEdit/FieldChange**（用户操作上下文） [^1]: PeopleTools 8.60: Component Processor Event Sequence (PeopleBooks) [^2]: PeopleSoft Application Design: Transaction Management ...
/** @brief I2C address to be used for ST25DV Data accesses. */ #define ST25DV_ADDR_DATA_I2C 0xA6 #define ST25DV_ADDR_DATA_W_I2C 0xA6 #define ST25DV_ADDR_DATA_R_I2C 0xA7 /** @brief I2C address to be used for ST25DV System accesses. */ #define ST25DV_ADDR_SYST_I2C 0xAE #define ST25DV_ADDR_SYST_W_I2C 0xAE #define ST25DV_ADDR_SYST_R_I2C 0xAF /* Registers i2c address */ /** @brief ST25DV GPO register address. */ #define ST25DV_GPO_REG 0x0000 /** @brief ST25DV IT duration register address. */ #define ST25DV_ITTIME_REG 0x0001 /** @brief ST25DV Energy Harvesting register address. */ #define ST25DV_EH_MODE_REG 0x0002 /** @brief ST25DV RF management register address. */ #define ST25DV_RF_MNGT_REG 0x0003 /** @brief ST25DV Area 1 security register address. */ #define ST25DV_RFA1SS_REG 0x0004 /** @brief ST25DV Area 1 end address register address. */ #define ST25DV_ENDA1_REG 0x0005 /** @brief ST25DV Area 2 security register address. */ #define ST25DV_RFA2SS_REG 0x0006 /** @brief ST25DV Area 2 end address register address. */ #define ST25DV_ENDA2_REG 0x0007 /** @brief ST25DV Area 3 security register address. */ #define ST25DV_RFA3SS_REG 0x0008 /** @brief ST25DV Area 3 end address register address. */ #define ST25DV_ENDA3_REG 0x0009 /** @brief ST25DV Area 4 security register address. */ #define ST25DV_RFA4SS_REG 0x000A /** @brief ST25DV I2C security register address. */ #define ST25DV_I2CSS_REG 0x000B /** @brief ST25DV Capability Container lock register address. */ #define ST25DV_LOCKCCFILE_REG 0x000C /** @brief ST25DV Mailbox mode register address. */ #define ST25DV_MB_MODE_REG 0x000D /** @brief ST25DV Mailbox Watchdog register address. */ #define ST25DV_MB_WDG_REG 0x000E /** @brief ST25DV Configuration lock register address. */ #define ST25DV_LOCKCFG_REG 0x000F /** @brief ST25DV DSFID lock register address. */ #define ST25DV_LOCKDSFID_REG 0x0010 /** @brief ST25DV AFI lock register address. */ #define ST25DV_LOCKAFI_REG 0x0011 /** @brief ST25DV DSFID register address. */ #define ST25DV_DSFID_REG 0x0012 /** @brief ST25DV AFI register address. */ #define ST25DV_AFI_REG 0x0013 /** @brief ST25DV Memory size register address. */ #define ST25DV_MEM_SIZE_LSB_REG 0x0014 /** @brief ST25DV Memory size register address. */ #define ST25DV_MEM_SIZE_MSB_REG 0x0015 /** @brief ST25DV Block size register address. */ #define ST25DV_BLK_SIZE_REG 0x0016 //** @brief ST25DV ICref register address. */ #define ST25DV_ICREF_REG 0x0017 /** @brief ST25DV UID register address. */ #define ST25DV_UID_REG 0x0018 /** @brief ST25DV IC revision register address. */ #define ST25DV_ICREV_REG 0x0020 /** @brief ST25DV I2C password register address. */ #define ST25DV_I2CPASSWD_REG 0x0900 /* Dynamic Registers i2c address */ /** @brief ST25DV GPO dynamic register address. */ #define ST25DV_GPO_DYN_REG 0x2000 /** @brief ST25DV Energy Harvesting control dynamic register address. */ #define ST25DV_EH_CTRL_DYN_REG 0x2002 /** @brief ST25DV RF management dynamic register address. */ #define ST25DV_RF_MNGT_DYN_REG 0x2003 /** @brief ST25DV I2C secure session opened dynamic register address. */ #define ST25DV_I2C_SSO_DYN_REG 0x2004 /** @brief ST25DV Interrupt status dynamic register address. */ #define ST25DV_ITSTS_DYN_REG 0x2005 /** @brief ST25DV Mailbox control dynamic register address. */ #define ST25DV_MB_CTRL_DYN_REG 0x2006 /** @brief ST25DV Mailbox message length dynamic register address. */ #define ST25DV_MBLEN_DYN_REG 0x2007 /** @brief ST25DV Mailbox buffer address. */ #define ST25DV_MAILBOX_RAM_REG 0x2008 /* GPO */ #define ST25DV_GPO_RFUSERSTATE_SHIFT (0) #define ST25DV_GPO_RFUSERSTATE_FIELD 0xFE #define ST25DV_GPO_RFUSERSTATE_MASK 0x01 #define ST25DV_GPO_RFACTIVITY_SHIFT (1) #define ST25DV_GPO_RFACTIVITY_FIELD 0xFD #define ST25DV_GPO_RFACTIVITY_MASK 0x02 #define ST25DV_GPO_RFINTERRUPT_SHIFT (2) #define ST25DV_GPO_RFINTERRUPT_FIELD 0xFB #define ST25DV_GPO_RFINTERRUPT_MASK 0x04 #define ST25DV_GPO_FIELDCHANGE_SHIFT (3) #define ST25DV_GPO_FIELDCHANGE_FIELD 0xF7 #define ST25DV_GPO_FIELDCHANGE_MASK 0x08 #define ST25DV_GPO_RFPUTMSG_SHIFT (4) #define ST25DV_GPO_RFPUTMSG_FIELD 0xEF #define ST25DV_GPO_RFPUTMSG_MASK 0x10 #define ST25DV_GPO_RFGETMSG_SHIFT (5) #define ST25DV_GPO_RFGETMSG_FIELD 0xDF #define ST25DV_GPO_RFGETMSG_MASK 0x20 #define ST25DV_GPO_RFWRITE_SHIFT (6) #define ST25DV_GPO_RFWRITE_FIELD 0xBF #define ST25DV_GPO_RFWRITE_MASK 0x40 #define ST25DV_GPO_ENABLE_SHIFT (7) #define ST25DV_GPO_ENABLE_FIELD 0x7F #define ST25DV_GPO_ENABLE_MASK 0x80 #define ST25DV_GPO_ALL_MASK 0xFF /* GPO_Dyn */ #define ST25DV_GPO_DYN_RFUSERSTATE_SHIFT (0) #define ST25DV_GPO_DYN_RFUSERSTATE_FIELD 0xFE #define ST25DV_GPO_DYN_RFUSERSTATE_MASK 0x01 #define ST25DV_GPO_DYN_RFACTIVITY_SHIFT (1) #define ST25DV_GPO_DYN_RFACTIVITY_FIELD 0xFD #define ST25DV_GPO_DYN_RFACTIVITY_MASK 0x02 #define ST25DV_GPO_DYN_RFINTERRUPT_SHIFT (2) #define ST25DV_GPO_DYN_RFINTERRUPT_FIELD 0xFB #define ST25DV_GPO_DYN_RFINTERRUPT_MASK 0x04 #define ST25DV_GPO_DYN_FIELDCHANGE_SHIFT (3) #define ST25DV_GPO_DYN_FIELDCHANGE_FIELD 0xF7 #define ST25DV_GPO_DYN_FIELDCHANGE_MASK 0x08 #define ST25DV_GPO_DYN_RFPUTMSG_SHIFT (4) #define ST25DV_GPO_DYN_RFPUTMSG_FIELD 0xEF #define ST25DV_GPO_DYN_RFPUTMSG_MASK 0x10 #define ST25DV_GPO_DYN_RFGETMSG_SHIFT (5) #define ST25DV_GPO_DYN_RFGETMSG_FIELD 0xDF #define ST25DV_GPO_DYN_RFGETMSG_MASK 0x20 #define ST25DV_GPO_DYN_RFWRITE_SHIFT (6) #define ST25DV_GPO_DYN_RFWRITE_FIELD 0xBF #define ST25DV_GPO_DYN_RFWRITE_MASK 0x40 #define ST25DV_GPO_DYN_ENABLE_SHIFT (7) #define ST25DV_GPO_DYN_ENABLE_FIELD 0x7F #define ST25DV_GPO_DYN_ENABLE_MASK 0x80 #define ST25DV_GPO_DYN_ALL_MASK 0xFF /* ITTIME */ #define ST25DV_ITTIME_DELAY_SHIFT (0) #define ST25DV_ITTIME_DELAY_FIELD 0xFC #define ST25DV_ITTIME_DELAY_MASK 0x03 /* ITSTS_Dyn */ #define ST25DV_ITSTS_RFUSERSTATE_SHIFT (0) #define ST25DV_ITSTS_RFUSERSTATE_FIELD 0xFE #define ST25DV_ITSTS_RFUSERSTATE_MASK 0x01 #define ST25DV_ITSTS_RFACTIVITY_SHIFT (1) #define ST25DV_ITSTS_RFACTIVITY_FIELD 0xFD #define ST25DV_ITSTS_RFACTIVITY_MASK 0x02 #define ST25DV_ITSTS_RFINTERRUPT_SHIFT (2) #define ST25DV_ITSTS_RFINTERRUPT_FIELD 0xFB #define ST25DV_ITSTS_RFINTERRUPT_MASK 0x04 #define ST25DV_ITSTS_FIELDFALLING_SHIFT (3) #define ST25DV_ITSTS_FIELDFALLING_FIELD 0xF7 #define ST25DV_ITSTS_FIELDFALLING_MASK 0x08 #define ST25DV_ITSTS_FIELDRISING_SHIFT (4) #define ST25DV_ITSTS_FIELDRISING_FIELD 0xEF #define ST25DV_ITSTS_FIELDRISING_MASK 0x10 #define ST25DV_ITSTS_RFPUTMSG_SHIFT (5) #define ST25DV_ITSTS_RFPUTMSG_FIELD 0xDF #define ST25DV_ITSTS_RFPUTMSG_MASK 0x20 #define ST25DV_ITSTS_RFGETMSG_SHIFT (6) #define ST25DV_ITSTS_RFGETMSG_FIELD 0xBF #define ST25DV_ITSTS_RFGETMSG_MASK 0x40 #define ST25DV_ITSTS_RFWRITE_SHIFT (7) #define ST25DV_ITSTS_RFWRITE_FIELD 0x7F 解释下这些宏定义
06-05
嗯，用户这次问的是ST25DV芯片的宏定义细节，特别是I2C地址、寄存器和位操作部分。看来用户是在开发底层驱动，需要直接操作硬件寄存器。这种需求很硬核啊，得把技术细节抠清楚才行。用户提到要"尽可能参考上一次的...
转化问题学生的六种激励法.doc
最新发布
08-10
转化问题学生的六种激励法.doc
一个基于Java编写的聊天软件，支持好友列表，窗口多开，JSP Web注册账户 分Client端和Server端
08-10
一个基于Java编写的聊天软件，支持好友列表，窗口多开，JSP Web注册账户。分Client端和Server端。
安全设计“左移”：DevSecOps 成为编码起点.doc
08-10
安全设计“左移”：DevSecOps 成为编码起点.doc
酒店管理系统概要设计说明书.doc
08-10
酒店管理系统概要设计说明书.doc
幼儿园助理工作总结.doc
08-10
幼儿园助理工作总结.doc
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值