ERP Context File参数说明

跳至内容

 

 

PowerView 已关闭

Asheng (可用)

(0)

与我们联系   帮助

 

 

 

 

面板

知识

服务请求

补丁程序和更新程序

社区

认证

系统

收集器

高级客户服务

设置

全局搜索

 

文档显示

提供反馈...

搜索: ebs tmpdir

 

 

R12.0 / R12.1 : Oracle EBS Context Variables (文档 ID 458282.1)

转到底部

---

Applies to: Oracle Applications Technology Stack - Version 12.0.0 to 12.1.3 [Release 12.0 to 12.1] Information in this document applies to any platform. Goal What is the purpose of each of the variables defined in the context file? Solution This note gives list of Context Variables with details in short for Oracle Applications Release 12. A) Context Information: Variable Title OA_VAR Value Context Name s_contextname Name of the context, which is of the form <DB_SID>_<HOSTNAME>. Context Serial s_contextserial This value is automatically updated each time the context variable values are updated through the Oracle Applications Manager. Context Type s_contexttype Type of the context - whether it is an Applications context or a Database context. Location of the Applications Context File s_contextfile Location of the Applications context file. B) Applications system information: Variable Title OA_VAR Value System Name s_systemname Name of the Oracle Applications system which this context points to. Database SID s_dbSid Database SID for the system. Database Name s_dbGlnam Global Database name for the system. The value of this variable shall be the same as the Database SID on non-RAC environments. On RAC-environments, this name would be the same for all cluster nodes while the Database SID would be different for each cluster node. Database SID in Lower Case s_dbSidLower Database SID in lower case for the system. C) System Configurations (oa_system_config) : Variable Title OA_VAR Value Apps Environment Name s_appsEnvName Name of the Applications Environment. TIER_DB s_isDB YES/NO, denoting if Database Server is enabled in this context. TIER_ADMIN s_isAdmin YES/NO denoting if Admin Server is enabled in this context TIER_WEB s_isWeb YES/NO denoting if Web Server is enabled in this context TIER_FORMS s_isForms YES/NO denoting if Forms Server is enabled in this context TIER_FORMSDEV s_isFormsDev YES/NO denoting if Forms Server is enabled in this context TIER_NODE s_isConc YES/NO denoting if Concurrent Processing Server is enabled in this context TIER_NODEDEV s_isConcDev YES/NO denoting if Concurrent Processing Server is enabled in this context TechStack Config Option s_techstack This is automatically supplied to Autoconfig. Since R12 supports only the 10.1.3 techstack, this variable can take only the value 'as1013'. Automatic NetService Files Generation Config Option s_tnsmode The tnsnames.ora file is generated from the database when this option is set to 'generateTNS'. Applications version s_apps_version This stores the applications version. Apache mode s_apache_mode This variable is used to specify whether Apache should be run in the 'Normal' mode or in the 'Restricted' mode. Apache Restricted Mode is used when Oracle Applications need to be brought down for maintenance purposes. In this mode, during downtime normal users would be redirected to a standard 'downtime' URL displaying the downtime details while the privileged users like System Administrators would be able to monitor patches through OAM. This variable should be in sync with 's_restricted_mode_comment'. For running Apache in the NORMAL mode set this variable to NORMAL and 's_restricted_mode_comment' to #. For RESTRICT mode set this variable to RESTRICT and 's_restricted_mode_comment' to null value. IAS version s_ias_version This variable stores the Oracle Application Server version. D) Users (oa_users): Variable Title OA_VAR Value Database 'SYS' User s_sys_user The database 'SYS' user Applications 'APPS' User s_apps_user The applications 'APPS' user Applications 'APPLSYS' User s_applsys_user The applications 'APPLSYS' user. CP User s_cp_user This username will be used for starting and stopping the Concurrent Manager. By default, this variable is set to SYSADMIN which is the default username of the System Administrator. Applications 'GUEST' User s_guest_user The applications 'GUEST' user Applications 'GUEST' Password s_guest_pass The applications 'GUEST' password. Applications 'GWYUID' User s_gwyuid_user The applications 'GWYUID' user. Applications 'GWYUID' Password s_gwyuid_pass The applications 'GWYUID' password. E) Customer Info(customer_info): Variable Title OA_VAR Value Customer Metalink ID s_metalink_id Metalink ID of the customer Customer Country Code s_country_code This variable is used while configuring the Oracle Configuration Manager. F) Language Settings(nls_settings): Variable Title OA_VAR Value Default Territory s_defterr Defines the NLS territory which determines cultural conventions such as local time, date, numeric, and monetary conventions. By default, this value is set to 'America'. Base Language s_base_lang Base Language for the Oracle Applications System. By default, this variable is set to 'American English'. For a list of all supported languages, please refer to the Oracle Applications Installation Manual. Environment Languages s_env_langs The variable was created to contain the list of all languages supported on the particular environment. This should have includes the Base Language as well as all the Installed Languages. However, this context variable is never updated when support is added for new languages. Hence, this context variable value is not in sync with the actual list of languages supported on the R12 instance, thus leading to confusion, so the variable will be removed starting from version 120.271.12010000.18 of the file adxmlctx.tmp. For a list of all supported languages, please refer to the Oracle Applications Install Manual. G) Applications Configuration(oa_shared_config): Variable Title OA_VAR Value Configuration Home s_config_home This variable is used to specify the top level directory to which AutoConfig will instantiate the instance specific configuration files in a shared file system architecture. Configuration Home for APPL_TOP files s_appl_config_home This variable is used to specify the top level directory to which AutoConfig will instantiate the instance specific configuration files related to APPL_TOP in a shared file system architecture. Configuration Home for ORACLE_HOME files s_ora_config_home This variable is used to specify the toplevel directory to which AutoConfig will instantiate the instance specific configuration files related to ORACLE_HOME in a shared file system architecture. Common Log File Location s_logs_dir This variable is used to specify the top level directory to which the application services will write instance specific log files in a shared file system architecture. Common PID File Location s_pids_dir This variable is used to specify the top level directory to which the application services will write instance specific Process ID files in a shared file system architecture. H) Database Server(oa_db_server): Variable Title OA_VAR Value Database Server Host s_dbhost Database server host Fully Qualified Database Server Domain Name s_dbdomain Fully qualified domain name for the database server. Database SID s_db_serv_sid The SID for the database on the database server. Database Character Set s_dbcset Character set of the Applications database. I) Admin Server (oa_admin_server) : Variable Title OA_VAR Value Admin Server Host s_admhost Admin server host. Fully Qualified Administration Server Domain Name s_admdomain Fully qualified domain name for the Administrator Server. J) Concurrent Processing Server (oa_cp_server) : Variable Title OA_VAR Value Concurrent Processing Host s_cphost Concurrent processing host Fully Qualified Concurrent Processing Server Domain Name s_cpdomain Fully qualified domain name for the Concurrent Processing Server. AF_LD_LIBRARY_PATH s_conc_java_ldlib This variable is used to set the LD_LIBRARY_PATH for Java concurrent programs. Concurrent Processing Password Type s_cp_password_type The Concurrent Processing Password Type parameter indicates which username and password will be supplied by the user when Concurrent Processing is started from the command line. Allowed values are {AppsSchema, AppsUser}. Responsibility Application Short Name s_cp_resp_shortname Short name of the application for your responsibility. This name, along with your responsibility name, will be used to select a responsibility for your concurrent request to run in. By default, this variable is set to SYSADMIN which is the default responsibility application short name of the System Administrator. For Concurrent Manager Operator, default responsibility application short name is 'FND'. Responsibility Name s_cp_resp_name This name, along with your responsibility application short name, will be used to select a responsibility for your concurrent request to run in. By default, this variable is set to 'System Administrator' which is the default responsibility name of the System Administrator. For Concurrent Manager Operator, default responsibility name is 'Concurrent Manager Operator'. Concurrent Processing Reviver Process s_cp_reviver Enable/Disable Concurrent Processing Reviver Process. Concurrent Processing Reviver Process will recover the Concurrent Manager from a Network/Database failure. Allowed values are {enabled, disabled}. Reviver Process PID Directory Location s_fndreviverpiddir This variable specifies the path where ICM reviver process pid file will be created. Oracle recommends using a local disk as the PID file location because the reviver process may run when the network is down. K) Oracle Workflow Java Mailer (oa_workflow_server) : Variable Title OA_VAR Value Oracle Workflow Java Mailer IMAP Host s_javamailer_imaphost Oracle Workflow Java Mailer IMAP Host. Oracle Workflow Java Mailer IMAP domain s_javamailer_imapdomainname Oracle Workflow Java Mailer domain. Oracle Workflow Admin Role s_wf_admin_role Role name of the Oracle Workflow Administrator. Oracle Workflow Java Mailer IMAP ReplyTo Address s_javamailer_reply_to Oracle Workflow Java Mailer IMAP ReplyTo Address. Oracle Workflow Java Mailer IMAP User Name s_javamailer_imap_user Oracle Workflow Java Mailer IMAP User Name. Oracle Workflow Java Mailer OUTBOUND User Name s_javamailer_outbound_user Oracle Workflow Java Mailer User Name to Authenticate Oracle Workflow Mailer against SMTP Server SMTP Server Host s_smtphost SMTP Server Host. Fully Qualified Email Server Domain Name s_smtpdomainname Fully Qualified Domain Name for the Email Server. L) SMTP Server (oa_smtp_server): Variable Title OA_VAR Value SMTP Server Host s_smtphost SMTP Server Host Fully Qualified Email Server Domain Name s_smtpdomainname Fully Qualified Domain Name for the Email Server. M) Forms Server (oa_forms_server): Variable Title OA_VAR Value Forms Server Host s_formshost Forms Server Host Fully Qualified Forms Server Domain Name s_formsdomain Fully Qualified Domain Name for the Forms Server. Forms Server FND_TOP s_formsfndtop Location of the FND_TOP on the Forms Server Forms Runtime Executable Name s_frmRuntime Name of the Forms runtime executable. Forms CGI Runtime Executable Name s_frmRunCGI Name of the Forms CGI startup executable. Forms Connection Mode s_frmConnectMode Forms Connection Mode. Allowed Values are {socket, servlet}. By default, the value of this variable is set to 'servlet' since the servlet mode would be used by default for connecting to the Forms server. Forms Launcher URL Path s_formslauncher_path URL path used for launching Forms. This context variable is used for setting the ICX_FORMS_LAUNCHER profile. This variable should be set to 'forms/frmservlet' when using Forms Servlet mode and to 'OA_HTML/frmservlet' when using Forms Socket mode. Forms temporary file directory location s_forms_tmpdir This variable is used to set the value for forms environment variables TMPDIR (on unix)/TMP (on windows) which is the location for the temporary files generated by Forms Process. TMPDIR/TMP is set in the configuration files default.env (Forms Servlet mode) and socket.env (Forms Socket mode). Format for the reports job output s_desformat This variable sets the format for the reports job output, i.e. html/RTF/PDF. Maximum number of network retries after network disconnect s_frmNetworkRetries Number of times the client should attempt to connect to the forms server if the network is interrupted. Is Chronos logging Enabled s_isChronosEnabled Enable/Disable Chronos logging. Allowed values are {true, false}. Setting this to 'true' enables Chronos Logging and setting it to ''false' disables it. By default, this value is set to true. Chronos URL s_chronosURL If chronos logging is enabled, This value should be set to http[s]://&lt;webCacheHost&gt;.&lt;webCacheDomain&gt;:&lt;webCachePort&gt;/oracle_smp_chronos/oracle_smp_chronos_sdk.gif, where webCacheHost, webCacheDomain and webCachePort are respectively the hostname, domain and port of the webcache instance. Is EndUserMonitoring logging Enabled s_isEndUserMonitoringEnabled Enable/Disable EndUserMonitoring logging. Allowed values are {true, false}. Setting this to 'true' enables EndUserMonitoring Logging and setting it to 'false' disables it. No value(null value) specified for this variable will disable EndUserMonitoring logging. Forms runtime file directory location s_forms_trace_dir This variable is used to specify the location of dump files produced as a result of a crash of any of the forms runtime executables. The dump files contains diagnostic information concerning what was happening when the process crashed. Forms Servlet JVM Options s_forms_jvm_options Forms Servlet JVM Options Forms OC4J Options s_forms_oc4j_options This variable is used to specify the system properties that should be passed to the Forms OC4J on instance startup. Forms Heartbeat s_forms_heartbeat Time in minutes to wait before the heartbeat message is sent by the Forms Client to the server to keep the connection alive. FORMS OC4J Instance Start Parameters s_forms_jvm_start_options The value of this variable contains the parameters that are passed to the JVM when starting the FORMS OC4J instance. FORMS OC4J Instance Stop Parameters s_forms_jvm_stop_options The value of this variable contains the parameters that are passed to the JVM when stopping the FORMS OC4J instance. Maximum block time (in milliseconds) for listener servlet s_forms_maxblocktime Maximum block time (in milliseconds) for listener servlet Forms Servlet URL s_forms_servlet_serverurl For the Servlet mode, this variable should be set to the Forms Servlet URL. For the Forms Socket Mode, this variable should be set to null. Number of frmweb process s_frmsrv_nprocs Specifies the number of frmweb process that are invoked at Forms Server startup Forms Servlet Comment s_forms_servlet_comment Removing the # enables starting of jserv processes for the forms group Use session cookie s_form_session_cookie Depending on the value of this variable, the Forms servlet uses session cookie to maintain the state of the session. Allowed values are {true, false}. If set to 'true', the session cookie is used to maintain the state of the session, else not. Number of JVMs for FORMS OC4J Instance s_forms_nprocs Specifies the number of JVM processes serving the forms OC4J Instance. Forms OC4J log rotation time s_forms_oc4j_log_rotation_time This parameter is used to specify the time interval in seconds for rotating the Forms OC4J log files. Forms OC4J log rotation size s_forms_oc4j_log_rotation_size This variable specifies the size of the log file in Kilo Bytes when Forms OC4J will rotate its log file. The default value for this variable is set to 10000KB. Enable FORMS OC4J Access log s_forms_oc4j_enable_access_log This variable is used to enable/disable OC4J access log for FORMS application. Setting the value of this variable to 'TRUE' will enable the access log. Forms Tabstop s_forms_tabstop This variable is used in appsweb.cfg to specify the TAB stop position in multiline text fields in Forms. Forms version s_forms_version This variable is used to set the Forms version in the Reports configuration template (rwbuilder_conf_1012.tmp). The rwbuilder_conf_1012.tmp template used to have the Forms version hardcoded to '10.1.2.0.2', and this value was not managed via a context variable. As a result, whenever the Oracle Home is upgraded, the Forms version in this template has to be modified accordingly. So, this variable was introduced to maintain the version of this Oracle home. This environment variable is available for customers having version 120.271.12010000.7 or higher of the file adxmlctx.tmp. N) OACORE OC4J (oacore_server): Variable Title OA_VAR Value OACORE OC4J Instance Start Parameters s_oacore_jvm_start_options The value of this variable contains the parameters that are passed to the JVM when starting the OACORE OC4J instance. OACORE OC4J Options s_oacore_oc4j_options This variable is used to specify the system properties that should be passed to the oacore OC4J on instance startup. OACORE OC4J Instance Stop Parameters s_oacore_jvm_stop_options The value of this variable contains the parameters that are passed to the JVM when stopping the OACORE OC4J instance. OACORE OC4J Instance Prepend LD_LIBRARY_PATH s_oacore_prepend_ld_lib_path This variable is used to specify path to the libraries that need to be prepended to the existing LD_LIBRARY_PATH for the OACORE OC4J Instance. For UNIX platforms, use ':' at the end of the directory list and to separate a list of directories. For Windows platforms, use ';' at the end of the directory list and to separate a list of directories. Prepend OACORE OC4J Classpath s_oacore_prepend_classpath This variable is used to specify one or more directories that contain custom libraries to be included in the OC4J classpath before the inclusion of JAVA_TOP. Append OACORE OC4J Classpath s_oacore_append_classpath This variable is used to specify one or more directories that contain custom libraries to be included in the OC4J classpath after the inclusion of JAVA_TOP. OACORE OC4J Instance LD_LIBRARY_PATH s_oacore_ld_lib_path This variable is used to specify LD_LIBRARY_PATH for the OACORE OC4J Instance. Load CZ Servlet s_load_cz_servlet This variable is used to determine whether Oracle Configurator servlet classes defined in orion-web.xml need to be loaded when OC4J server starts. The default value is set to '1' which means that the servlet is loaded. If you wish to disable this feature set the value '-1'. Start Email Center Outbox Processor s_load_emailcenter_servlet This variable is used to determine whether the Email Center Outbox Processor is started when the OC4J server starts. The Outbox Processor is controlled via the InitializationServlet class defined in orion-web.xml. The default value is '-1', which means that the servlet is not loaded. If you wish to enable this feature set the value to '1'. Number of JVMs for OACORE OC4J Instance s_oacore_nprocs Specifies the number of JVM processes serving the oacore OC4J Instance. Oacore OC4J log rotation time s_oacore_oc4j_log_rotation_time This variable is used to set the time interval in seconds for rotating the Oacore OC4J log files. Oacore OC4J log rotation size s_oacore_oc4j_log_rotation_size This variable specifies the size of the log file in Kilo Bytes when oacore OC4J will rotate its log file. The default value for this variable is set to 10000KB. Enable OACORE OC4J Access log s_oacore_oc4j_enable_access_log This variable is used to enable/disable OC4J access log for OACORE application. Setting the value of this variable to 'TRUE' will enable the access log. Ignore comma in cookies named s_ignore_comma_in_cookies_named This variable is used to specify cookie names whose values contain a comma. Value for this context variable can be a single cookie name or list of cookie names separated by comma. This variable is used in opmn.xml as a part of OACORE JVM start parameters. OACORE OC4J Instance Java Compiler Options Parameters s_oacore_javac_options Used to pass command line options to the Java compiler. This context variable specifies platform specific java-compiler options used in server.xml via the &lt;java-compiler&gt; for OACORE OC4J instance. For additional information about these properties please refer to 'Oracle Containers for J2EE Configuration and Administration Guide'. O) Discoverer (oa_disco_server): Variable Title OA_VAR Value External Integrated Discoverer URL s_disco_url Set the value of this variable to the appropriate external integrated 10G Discoverer URL. An acceptable value for this parameter is a URL that includes protocol, host, domain and port. Discovery URL Prefix s_disco_eul_prefix Discovery URL prefix P) Metrics Server (oa_met_server): Variable Title OA_VAR Value Metrics Server Host s_methost Metrics server host Fully Qualified Metrics Server Domain Name s_metdomain Fully qualified domain name for the metrics server. Metrics Server Load Balancing Host s_leastloadedhost Metrics server load balancing host Metrics Server Error URL s_meterrorurl Metrics server error URL Q) Oracle MWA Server (oa_mwa_server): Variable Title OA_VAR Value MSCA Log Level s_mwaLogLevel Different log levels can be set for obtaining more debug information. MSCA Log Rotate s_mwaLogRotate Enable log rotation of files based on size (Yes/No). MSCA Log File Size s_mwaLogFileSize If log rotation is enabled, then rotation occurs when log file exceeds this size. MSCA Drop Connection Timeout s_mwaDropConnectionTimeout MSCA Server allows a client that was disconnected to reconnect within the time mentioned below in minutes. MSCA Stale Session Timeout s_mwaStaleSessionTimeout MSCA Stale Session Timeout. MSCA Server disconnects a client after the client is idle for mwa.StaleSessionTimeout minutes. MSCA Dispatcher Thread Count s_mwaDispatcherThreadCount Specify number of worker threads to start from the dispatcher process MSCA Dispatcher Clients Per Worker s_mwaDispatcherClientsPerWorker Specify number of clients that each dispatcher worker thread can handle MSCA Compatibility Setting for JVM s_mwaJVMb MSCA Compatability Setting for JVM MSCA LOV activation by ENTER s_mwaActivateLOVByEnter Used to specify whether user would like to retain old LOV behavior, i.e. LOV will be activated by ENTER or not Show Change Responsibility and Change Organization on submenus s_mwaSubmenuChangeOrgResp Specifies whether Change Responsibility and Change Organization menu items should appear on submenus; if TRUE, then these menu items will appear on the main menu and submenus; if FALSE, then these menu items will only appear on the main menu; the default value is FALSE. R) Oracle Web Server (oa_web_server): Variable Title OA_VAR Value Web Server Host s_webhost Web Server Host. External URL for Third Party Access to E-Business Suite s_external_url This is the URL that third party tools use to connect to the E-Business Suite. Oracle HTTP Server Directory Index Page s_directory_index This directive sets the list of resources to look for, when the client requests an index of the directory by specifying a / at the end of the directory name. You can specify multiple values separated by space for this variable and the server will return the first one it finds. Web Host entry point s_webentryhost The Host machine that accepts the http requests. Web domain entry point s_webentrydomain The domain of the host machine that accepts the http requests. Location for Lock files and pid files s_lock_pid_dir Location for Lock and pid files to be used for NetApp setup. Fully Qualified Web Server Domain Name s_webdomain This variable is used to set the fully qualified domain name of the web server. Server IP Address s_server_ip_address This is the IP address of the Web Host entry point (s_webentry_host) when configuring according to Oracle MetaLink Note 380490.1 or 380489.1. This value will be used by the dbc generation utility when registering this Web Host entry point with Oracle E-Business Suite. Oracle HTTP Server Process ID File s_web_pid_file Complete path to the Oracle HTTP Server Process ID File. URL Protocol s_url_protocol URL Protocol to be used. Allowed Values are {http, https}. Web SSL Directory s_web_ssl_directory Web SSL Directory. Local URL Protocol s_local_url_protocol Local URL Protocol. Allowed values {http, https}. Apache JServ Protocol s_ajp_protocol This variable is used to set the protocol for communication between Oracle HTTP Server and OC4J. The allowed values are 'ajp' and 'ajps'. The value of this variable should be set to 'ajps' to enable SSL communication between Oracle HTTP Server and OC4J. Otherwise, it should be set to 'ajp'. By default, the value is set to 'ajp'. Enable/Disable use of AJPS protocol at the OC4J end s_oc4j_secure This variable is used in OC4J's configuration files to enable or disable the use of AJPS protocol for SSL communication with Oracle HTTP Server. The allowed values are 'true' and 'false'. This variable should be set to 'true' when SSL is configured for OC4J. Otherwise, it should be set to 'false'. By default, the value is set to 'false'. nable/Disable use of AJPS protocol at the Oracle HTTP Server end s_oc4j_ssl This variable is used in the Oracle HTTP Server's configuration files to enable or disable the use of AJPS protocol for SSL communication with OC4J. The value of this variable should be set to 'on' when SSL is configured for OC4J and to 'off' when SSL is not configured for OC4J. By default, the value of this variable is set to 'off'. SSLCertificateChainFile s_web_ssl_certchainfile File of PEM-encoded Server CA Certificates. Name of the wallet file used by webservices s_websrv_wallet_file This is the name of the wallet file used by webservices. Enable/disable SSL terminator configuration s_enable_sslterminator This variable is used to enable/disable the inclusion of the configuration file used for SSL terminated environments. By default the value of this variable is set to '#' which indicates that the configuration file is not included in the server configuration. To enable, the pound sign '#' must be removed. Sun Plugin version s_sun_plugin_ver Sun Plugin Version. Sun Desktop Plugin Type s_sun_plugin_type Type of Sun desktop plug-in used for running Forms on desktop clients. By default, the plugin type is 'jdk' since only 'jdk' is supported in R12. Sun JDK CLSID s_sun_clsid Class ID for referencing the JDK. JInitiator version (dots) s_jinit_ver_dot JInitiator version(dot separated syntax) JInitiator version (commas) s_jinit_ver_comma JInitiator version (comma separated syntax) JInitiator CLSID s_jinit_clsid CLSID for referencing the JInitiator. Fully Qualified Proxy Server Host Name s_proxyhost Fully Qualified Proxy Server Host Name. Proxy Server Port s_proxyport Proxy Server Port. Fully Qualified Proxy Bypass Domains s_proxybypassdomain Fully Qualified Domains which can bypass the Proxy Server. List of non proxy hosts for OC4J s_nonproxyhosts List of hosts that should be reached directly, bypassing the proxy. This is a list of regular expressions separated by | (pipe). For example: '*', '*.oracle.com', 'abc.oracle.com|def.oracle.com', '*.oracle.com|abc.xyz.com'. Any host matching one of the specified regular expressions will be reached through a direct connection instead of through a proxy Nodes in cluster configuration s_oc4j_cluster_nodes It is a list of Servers that are participating in the cluster configuration. For example, if two node exists in the configuration, then value will be appstier1.company.com:6000,appstier2.company.com:6000 on both the application tier servers. URL for Applications Portal s_apps_portal_url URL for Applications Portal. List of nodes that have access to Portlet Provider URLs s_trusted_portals Enter space separated values consisting of node names or fully qualified node names or IP addresses of client machines which will be allowed to access Portlet Provider URLs Sysadmin Mail ID s_sysadmin_mail Sysadmin Mail ID. WF:Workflow Mailer Framework Web Agent s_wfmail_agent This profile option specifies the host and port of the Web server that notification mailers use to generate the content for Oracle Applications Framework regions that are embedded in notifications. If this profile option is not set, notification mailers will use the same Web agent specified in the Application Framework Agent profile option. However, if necessary for load balancing purposes, you can optionally specify a different Web agent for notification mailers to use. Refer to workflow administrators guide for more information. Please note that this profile option can be updated only at the SITE level. Cookie Domain s_cookie_domain Specific Domain to which the Cookies will be accesible. Session toplevel domain comment s_topleveldomain_comment Users of Oracle Portal should uncomment this variable. IANA Characterset s_iana_cset IANA Characterset used by Oracle HTTP Web Server. Login Page URL s_login_page URL to the Login Page. Oracle HTTP Server Listen Parameter s_http_listen_parameter This variable is used to set the Oracle HTTP Server Listen Directive in httpd.conf. The default value for this variable is set to the value of the context variable %s_webport% which means that all network interfaces configured on the web server machine will listen on this port. If there is a requirement that only one network interface should listen on the specified port then the value of this variable should be changed to IP:port combination or the value of s_webhost.s_webdomain:port Oracle HTTPS Server Listen Parameter s_https_listen_parameter This variable is used to set the Oracle HTTPS Server Listen Directive in ssl.conf. The default value for this variable is set to the value of the context variable %s_webssl_port% which means that all network interfaces configured on the web server machine will listen on this port. If there is a requirement that only one network interface should listen on the specified port then the value of this variable should be changed to IP:port combination or the value of webhost.webdomain:port HTTP Server core file location s_core_dest Location where the HTTP Server can dump the core file. Maximum Number of clients that can connect s_maxclients This directive sets the limit on the number of Simultaneous HTTP requests that can be supported. The maximum allowed value for MaxClients is 8192. Enable Keep-Alive connections s_keepalive The persistent connection feature of HTTP/1.1 to provide long-lived HTTP sessions which allow multiple requests to be sent over the same TCP connection. OHS timeout s_keepalive_timeout This directive sets the number of seconds OHS will wait for a subsequent request before closing the connection. Number of requests that an individual http process will handl s_maxrequests_perchild This directive sets the number of requests that an individual http child server process would handle. The maximum allowed value for this variable depends on the capacity of the system and also on the number of simultaneous users. By default, the value of this variable is set to '0'. Number of http requests allowed per connection s_maxkeepalive_requests This directive sets the number of http requests allowed per connection when KeepAlive directive is set to ON. The maximum allowed value for this variable depends on the capacity of the system and also on the number of simultaneous users. By default, this is set to '0'. Number of minimum idle http server processes s_minspare_servers This directive sets the desired minimum number of idle http server processes. Number of maximum idle http server processes s_maxspare_servers This directive sets the desired maximum number of idle http server processes. Number of Oracle HTTP Server child processes created on startup s_startServers Sets the value of the Oracle HTTP (Apache) server directive 'StartServers' in httpd.conf. StartServers directive sets the number of child server processes created on startup. As the number of processes is dynamically controlled depending on the load, there is usually little reason to adjust this parameter. For more details, please refer to http://download.oracle.com/docs/cd/B15904_01/web.1012/q20206/mod/mpm_common.html#startservers Oracle HTTP Server Limit Request Field Size s_limitrequestfieldsize The LimitRequestFieldSize directive allows the server administrator to reduce or increase the limit on the allowed size of an HTTP request header field. A server needs this value to be large enough to hold any one header field from a normal client request Oracle HTTP Server Limit Request Field s_limitrequestfields The LimitRequestFields directive allows the server administrator to modify the limit on the number of request header fields allowed in an HTTP request. A server needs this value to be larger than the number of fields that a normal client request might include. The number of request header fields used by a client rarely exceeds 20, but this may vary among different client implementations, often depending upon the extent to which a user has configured their browser to support detailed content negotiation Oracle HTTP Server Limit Request Body s_limitrequestbody The LimitRequestBody directive allows the user to set a limit on the allowed size of an HTTP request message body within the context in which the directive is given (server, per-directory, per-file or per-location). If the client request exceeds that limit, the server will return an error response instead of servicing the request. The size of a normal request message body will vary greatly depending on the nature of the resource and the methods allowed on that resource Oracle HTTP Server Limit Request Line s_limitrequestline The LimitRequestLine directive allows the server administrator to reduce the limit on the allowed size of a client's HTTP request-line below the normal input buffer size compiled with the server. Since the request-line consists of the HTTP method, URI, and protocol version, the LimitRequestLine directive places a restriction on the length of a request-URI allowed for a request on the server. A server needs this value to be large enough to hold any of its resource names, including any information that might be passed in the query part of a GET request Help Web Agent s_help_web_agent If HELP_WEB_AGENT profile is set, the value is used for the construction of all Help related URLs. This allows multiple application installations to share a common help system. Optional override. Custom SQL location s_customsql_path Custom SQL reports feature within OAM lets users generate HTML and text reports based on the SQL scripts they register. Applications Session Timeout s_sesstimeout Sets the value of EBS profile option ICX_SESSION_TIMEOUT via afwebprf.sql. The value of s_sesstimeout is specified in milliseconds, but the value of the profile option ICX_SESSION_TIMEOUT is set in minutes. The ICX: Session Timeout profile sets the maximum number of minutes to wait before invalidating an idle ICX Session. OC4J Session Timeout s_oc4j_sesstimeout Defines OC4J's servlet session timeout in minutes. It is specified in orion-web.xml of all the web modules deployed under each OC4J instances. A negative value indicates no timeout. A value of 0 results in an immediate timeout. Default value is 30 minutes. The value for the OC4J session timeout should be equivalent to or higher than the Applications session timeout (s_sesstimeout). For more details, please refer to http://download.oracle.com/docs/cd/B25221_04/web.1013/b14426/sessions.htm JInitiator Progress Dialog s_java_showprogress Feature to show the progress of downloading of JInitiator JAR files. Ohs log rotation time s_ohs_log_rotation_time This variable specifies the Hour of day when opmn process will rotate its log file. By default, this is set to '0' which means that the log will be rotated exactly at midnight. Opmn log rotation time s_opmn_log_rotation_time This variable specifies the Hour of day when opmn process will rotate its log file. By default, this is set to '0' which means that the log will be rotated exactly at midnight. Opmn log rotation size s_opmn_log_rotation_size This variable specifies the size of the log file in Kilo Bytes when opmn will rotate its log file. The default value for this variable is set to 1500000 KB Load AppsWSProvider Servlet s_load_appswsprovider_servlet This variable is used to enable/disable loading of the AppsWSProvider servlet when oc4j starts up. To enable loading of the servlet, the value of the context variable must be set to '1'. To disable loading of the servlet, the value must be set to '-1'. By default, the default value of the variable is set to '-1'. Load AppSearch Servlet s_load_appsearch_servlet This variable is used to enable/disable loading of the AppSearch servlet when oc4j starts up. To enable loading of the servlet, the value of the context variable must be set to '1'. To disable loading of the servlet, the value must be set to '-1'. By default, the value of the variable is set to '-1'. Load AppSearchMeta Servlet s_load_appsearchmeta_servlet The AppSearchMeta servlet is used as part of Secure Entreprise Search to enable the communication between the Search Modeler and E-Business Suite. This variable is used to enable/disable loading of the AppSearchMeta servlet when oc4j starts up. To enable loading of the servlet, the value of the context variable must be set to '1'. To disable loading of the servlet, the value must be set to '-1'. By default, the value of the variable is set to '-1'. Load MapViewer Servlet s_load_mapviewer_servlet This variable is used to enable/disable loading of the MapViewer servlet when oc4j starts up. To enable loading of the servlet, the value of the context variable must be set to '1'. To disable loading of the servlet, the value must be set to '-1'. By default, the value of the variable is set to '-1'. Load SOA Provider Servlet s_load_soaprovider_servlet This variable is used to enable/disable loading of the SOA Provider servlet when oc4j starts up. To enable loading of the servlet, the value of the context variable must be set to '1'. To disable loading of the servlet, the value must be set to '-1'. By default, the value of the variable is set to '-1'. Load OXTA Servlet s_load_oxta_servlet This variable is used to enable/disable loading of the Oracle XML Transport Agent servlet when oc4j starts up. To enable loading of this servlet, set this variable to '1'. To disable loading of this servlet, set this variable to '-1'. By default, the value is set to '1' Oracle SOA Provider User Nam s_soaprovider_user This variable is used to set the Oracle SOA Provider User Name for establishing Database connections. Connection pool size for OXTA servlets s_oxtainpool_size Size of the connection pool the OXTA servlets will get connection from when serving incoming requests. Setting this to a very high value would result in performance degradation while setting to very low values may result in the OXTA requests to wait longer for getting a connection. By default, its value is '1'. JDBC driver file name s_txk_jdbc_zip JDBC driver name. JDBC NLS character set library name s_txk_jdbc_nls The JDBC thin driver uses this library to convert between different character sets. The context value management system automatically maintains this variable and it should not be manually modified. Java 1.4 uses nlscharset12.zip, Java 1.5 and Java 1.6 use orai18n.zip. Long Running JVM s_long_running_jvm Indicates that JVM is expected to have a long lifespan if this value is true. XML Parser Path s_xmlparser Complete path to the Oracle XML Parser java archive file. Maximum jdbc pool size s_fnd_max_jdbc_connections fnd_max_jdbc_connections is the maximum jdbc pool size. This is the sum of the number of available connections and the number of locked connections. FND JDBC Statement Cache Size s_fnd_jdbc_stmt_cache_size This parameter controls how many parsed SQL statements are retained in the JDBC cache. Re-execution of statements stored in the JDBC statement cache will not require a reparse operation and will therefore be highly optimized. It should not be increased to an extreme value because maintaining this cache takes up memory in the JVM. We would recommend a value between 200 and 400. DBC File Name s_dbc_file_name This variable sets the value for the DBC file name. Make sure that you enter the file name without the extension. Apps JDBC URL s_apps_jdbc_connect_descriptor Configure this variable only when you have an Oracle RAC Database instance. Please see Note 388577.1 for more information on RAC and discussion of the value for this variable. Enable or disable the generation of the applications jdbc connect descriptor s_jdbc_connect_descriptor_generation The value of this variable determines whether the jdbc connect descriptor is regenerated and the value of the context variable s_apps_jdbc_connect_descriptor is updated. Acceptable values for this context variable are true (default) or false. Set this value to false when using a custom apps jdbc connect descriptor. Apps JDBC Connect Alias s_apps_jdbc_connect_alias Configure this variable only when you have an Oracle RAC Database instance. This variable can have a value of either a load balanced connect descriptor or an instance specific connect descriptor. Please see Note 388577.1 for more information. Application Server Security Authentication s_appserverid_authentication Application Server Security Authentication can take one of the following values {ON, OFF, SECURE}. OFF - Server security is not checked. Any application server machine can access the database. ON - Some level of trust is required to access the database. Either the Application Server is registered with the database or the module and version ID are known to be trusted. SECURE - Full trust is required for access to the database. Only registered Application Server machines and trusted code modules may connect. Web entry protocol s_webentryurlprotocol This parameter is used to set the web entry url protocol. Acceptable values for this parameter are http or https. Apache OptionsLink Directive s_options_symlinks !CAUTION! Oracle recommends not to change the default value of this parameter. If you change the default value then you will expose yourself to security vulnerability and performance degradation of your site. Session Check Frequency s_sessionCheck_frequency Time interval in milli seconds before checking for invalid sessions in a Servlet zone. Oracle HTTP Server Timeout s_ohstimeout This parameter stands for the amount of time (in seconds) the Oracle HTTP Server will wait for certain events(GET,POST,PUT etc) before failing a request Apache Log Level s_apache_loglevel Possible values include: debug, info, notice, warn, error, crit, alert, emerg. SSL Log Level s_ssl_loglevel This context variable is used to set the SSL Log Level. Possible values for this context variable are: none, error, warn, info, trace and debug. By default, the value is set to 'warn'. Oracle HTTP Server Administrator e-mail address s_ohs_serveradmin This is the email address that the server includes in any error messages sent to the client. Property dontChunkRequests for HTTPClient.jar s_httpclient_dontChunkRequests Indicates the dontChunkRequests property value for HTTPClient.jar. Possible values are true and false. Number of outbound threads s_outbound_threads Number of OXTA threads to be used for simultaneous outbound message sending. Setting this to a very high value would result in performance degradation while setting to very low values may result in the OXTA requests to wait longer for getting a connection. By default, the value of this variable is set to '1'. OXTAOutUseProxy s_oxta_proxy If this property is set to true, the proxy specified by OXTAOutProxyHost and OXTAOutProxyPort is used to send messages to the destination OXTAOutProxyHost s_oxta_proxyhost Fully Qualified proxy server hostname for the Oracle XML Transport Agent (OXTA). OXTAOutProxyPort s_oxta_proxyport Proxy port for the Oracle XML Transport Agent (OXTA). TrustStoreType s_ssl_truststoretype The keystore file type of the key material used for the trust manager. KeyStoreType s_ssl_keystoretype The keystore file type of the key material used for the key manager. TrustStore s_ssl_truststore Location of the key material for the trust manager. KeyStore s_ssl_keystore Location of the key material for the key manager. TrustManagerAlgorithm s_ssl_trustmanageralgorithm Default trust manager factory algorithm name as specified in the Java security properties. If no such property exists, this variable stores an implementation-specific default. KeyManagerAlgorithm s_ssl_keymanageralgorithm Default key manager factory algorithm name specified in the Java security properties. If no such property exists, this variable stores an implementation-specific default. Optimizer Home s_optit_home This variable is used to specify the location of the optimizer suite home. Parameter to enable/disable URL Firewall s_enable_urlfirewall This variable is used to enable or disable the URL Firewall required for DMZ configurations. By default the value of this variable is set to '#' which indicates that the URL firewall is disabled. To enable the URL firewall, the pound sign '#' must be removed. List of nodes that have access to Oracle HTTP Server administration pages s_admin_ui_access_nodes This variable is used to set the list of machines that are allowed to access the administration pages. Enter space separated values consisting of node names or fully qualified node names or IP addresses of client machines which will be allowed to access the administration pages. Minimum buffer size maintained by the pool s_fnd_jdbc_buffermin This is the minimum buffer size that should be maintained by the applications database connection pool. Acceptable values are positive integers less than integer:MAX Maximum buffer size maintained by the poo s_fnd_jdbc_buffermax This is the maximum buffer size that should be maintained by the applications database connection pool.Acceptable values are positive integers less than integer:MAX Time interval to check the buffer size s_fnd_jdbc_buffer_decay_interval This is the time interval in seconds the maintenance thread checks the buffer size .Acceptable values are positive integers less than integer:MAX Maximum number of available objects that should be removed in a thread cycle s_fnd_jdbc_buffer_decay_size This is the maximum number of connections that will be removed during any one thread cycle .Acceptable values are positive integers less than integer:MAX Enable/Disable pl/sql query s_fnd_jdbc_usable_check This variable indicates whether a simple pl/sql query should be performed to check whether the connection is usable before giving a connection to the client. Acceptable values are true or false Enable/Disable AOL security context and NLS state check s_fnd_jdbc_context_check This variable indicates whether the AOL security context and NLS state should be obtained from the database server session instead of the java client when the connection is returned to the pool. Acceptable values are true or false Free pl/sql state s_fnd_jdbc_plsql_reset This variable indicates whether the pl/sql state should be freed before the applications database connection pool gives the connection to the client. JDBC process escape s_jdbc_proc_esc This variable is used to enable or disable JDBC escape processing mechanism. Changing this parameter value has performance implications. Maximum capacity of JDBC Cached Buffer Size s_jdbc_max_cached_buffersize This variable is used in the DBC file to set the maximum capacity of JDBC cached buffer. A buffer whose capacity is bigger than this value is not pooled. Changing the value of this variable has performance implications. Custom DBC Parameters s_custom_dbc_params This variable holds a space separated custom dbc parameter list of name value pairs. For e.g. 'param1=value1 param2=value2 param3=value3'. These values will be seeded in to the dbc file during AutoConfig execution. S) OAFM OC4J (oafm_server): Variable Title OA_VAR Title OAFM OC4J Instance Start Parameters s_oafm_jvm_start_options The value of this variable contains the parameters that are passed to the JVM when starting the OAFM OC4J instance. OAFM OC4J Options s_oafm_oc4j_options This variable is used to specify the system properties that should be passed to the OAFM OC4J on instance startup. OAFM OC4J Instance Stop Parameters s_oafm_jvm_stop_options The value of this variable contains the parameters that are passed to the JVM when stopping the OAFM OC4J instance. Number of JVMs for OAFM OC4J Instance s_oafm_nprocs This specifies the number of JVM processes serving the OAFM OC4J Instance. Enable OAFM OC4J Access log s_oafm_oc4j_enable_access_log This context variable is used to enable/disable OC4J access log for OAFM and MapViewer application. Setting the value to 'TRUE' will enable the access log. T) Forms c4ws Server (forms-c4ws_server): Variable Title OA_VAR Value FORMS-C4WS OC4J Instance Start Parameters s_forms-c4ws_jvm_start_options OC4J requires that some java-options be passed to start and stop commands. These options are derived internally by OPMN, are not defined in opmn.xml configuration, and cannot be overridden. This context variable specifies ADDITIONAL java-options used in opmn.xml via the &lt;module-data&gt; for FORMS-C4WS OC4J instance startup. These java-options include JVM parameters and system properties for OC4J. For additional information about these properties please refer to 'Oracle Containers for J2EE Configuration and Administration Guide'. More details on JVM parameters can be found at http://blogs.sun.com/watt/resource/jvm-options-list.html and http://java.sun.com/javase/technologies/hotspot/vmoptions.jsp FORMS-C4WS OC4J Options s_forms-c4ws_oc4j_options Sets the FORMS-C4WS OC4J runtime options in opmn.xml. OC4J processes require that these options be passed in as part of the start or stop commands. These options cannot be overridden. For more details, please refer to http://download.oracle.com/docs/cd/B25221_04/core.1013/b15976/oc4j.htm#i1019859 FORMS-C4WS OC4J Instance Stop Parameters s_forms-c4ws_jvm_stop_options OC4J requires that some java-options be passed to start and stop commands. These options are derived internally by OPMN, are not defined in opmn.xml configuration, and cannot be overridden. This context variable specifies ADDITIONAL java-options used in opmn.xml via the &lt;module-data&gt; for FORMS-C4WS OC4J instance shutdown. These java-options include JVM parameters and system properties for OC4J. For additional information about these properties refer to 'Oracle Containers for J2EE Configuration and Administration Guide'. More details on JVM parameters can be found at http://blogs.sun.com/watt/resource/jvm-options-list.html and http://java.sun.com/javase/technologies/hotspot/vmoptions.jsp Number of JVMs for FORMS-C4WS OC4J Instance s_forms-c4ws_nprocs Specifies the number of java processes OPMN starts for FORMS-C4WS OC4J instance. It is used to set the numprocs parameter of &lt;process-set&gt; tag in opmn.xml. Refer to http://download.oracle.com/docs/cd/B25221_04/core.1013/b15976/common.htm for more details. Enable FORMS-C4WS OC4J Access log s_forms-c4ws_oc4j_enable_access_log This context variable is used to enable/disable OC4J access log for FORMS-C4WS application. Setting the value of this variable to 'TRUE' will enable the access log. X11 Display for FORMS-C4WS OC4J Service Instance s_forms-c4ws_display Used by the FORMS-C4WS OC4J Service Instance, this display must always be accessible during runtime. Should be set to an active and authorized X Windows display, and should point to a machine that is always available to the Applications instance. Enable headless operation for Java, for FORMS-C4WS OC4J Service Instance s_forms-c4ws_java_awt_headless 'Headless' operation refers to the ability to run a Java program without a monitor, mouse or keyboard. In UNIX environments, it usually means that X or an equivalent windowing system does not have to be present. Headless Java operation would mean that a server side Java program should be able to use the full J2SE or J2EE API without a GUI environment being present. This means that all AWT calls to manipulate components, graphics, fonts, printing etc. should be functional. Set this value to true to enable headless operation or set it to false (default value) to disable it. U) Oracle Fulfillment Server (jtff_server): Variable Title OA_VAR Value Oracle Fulfillment Server Instance Id s_ServerInstanceID Identifies the One-to-One Fulfillment Server instance that gets started when jtffmctl.sh is run. Oracle Fulfillment Maximum Number of Threads s_MaxBatchThreads Specifies the maximum number of threads on the One-to-One Fulfillment Server that gets started when jtffmctl.sh is run. Oracle Fulfillment Turnoff Low Priority Monitors s_TurnOffLowPriorityMonitor Specifies that the monitors of low priority be turned off on the One-to-One Fulfillment Server instance that gets started when jtffmctl.sh is run. Oracle Fulfillment Server Debug String s_jto_debug_string A comma-separated list indicating the items for which to log debug information for the Oracle Fulfillment Server. Oracle Fulfillment Server Log Level s_jto_log_level Logging level for the Oracle Fulfillment Server. For each number specified from 1-n, the server will write an extra layer of chained exception traces to the error log. The exceptions are chained together so that the source of the errors as they occur can be traced. Oracle Fulfillment Server RightFax Fax Enabler s_jto_fax_enabler Indicates the Java class that the Fulfillment Server is to use for sending faxes. This class must implement the oracle.apps.jtf.fm.engine.disp.FaxEnabler interface to be used as a fax enabler. Oracle Fulfillment Server RightFax Print Enabler s_jto_print_enabler This flag indicates the Java class that the Fulfillment Server is to use for sending print jobs to the printer. This class must implement the oracle.apps.jtf.fm.engine.disp.PrintEnabler interface to be used as a print enabler. Oracle Fulfillment Server RightFax zip Location s_jto_rfjava_loc RFJavaInt.zip is the zip file containing the Java integration classes provided by RightFax upon installation. That file should be included the classpath of the Fulfillment Server in order to successfully dispatch fax or print requests through RightFax. JSP cache directory s_jsp_cache_dir This variable is used to set the .jsp cache directory. Please refer to JSP Developer's guide for more information on the usage of this variable. Parameter to enable JSR-45 debugging support s_jsp_jsr45_dbg This variable is used to enable JSR-45 debugging support. Valid settings are file: to generate an SMAP file, class: to embed debugging info in the generated class, none: to generate no debugging information. Please refer to JSP Developer's guide for more information on the usage of these variables. Parameter to enable printing of stack trace s_jsp_dbg_mode This variable is used to enable printing the stack trace when certain runtime execeptions occur. Valid settings are true: to generate a stack trace, false: to turn off printing of the stack trace. Please refer to JSP Developer's guide for more information on the usage of these variables. Whether JSP-generated classes are automatically reloaded s_jsp_main_mode This variable is used to specify whether JSP-generated classes are automatically reloaded or JSP pages are automatically retranslated when JSP changes are made. Valid settings are recompile: container will check the timestamp of the jsp page since the last load, reload: container will check the timestamp of classes generated by the jsp translator, justrun: container will not perform any timestamp checking. Please refer to JSP Developer's guide for more information on the usage of these variables. Oracle Fulfillment Server Enabler Classpath s_jto_enabler_classpath A classpath that specifies the location of custom enabler code (if present) Oracle Fulfillment Server Log Warning Flag s_jto_show_warnings By default, warnings do not show up in the error log. If this flag is not set, then the first time a warning appears a single message shows up in the events log signifying that a warning had been issued. The default is 'false'. Oracle Fulfillment Server Id s_jto_server_id Identifies the One-to-One Fulfillment Server that gets started when jtffmctl.sh is run. Classpath to be used by the Oracle Fulfillment Server s_jto_classpath Classpath to be used by the Oracle Fulfillment Server V) Connection Manager Server (oa_cman_server): Variable Title OA_VAR Value Oracle Connection Manager Host s_cmanhost Oracle Connection Manager Host Oracle Connection Manager Domain Name s_cmandomain Fully Qualified Domain Name for the Oracle Connection Manager host References NOTE:745580.1 - How To Apply Patches On Shared Application Tier File System Environment

此文档是否有帮助?   是 否   文档详细信息       类型:   状态:   上次主更新:   上次更新:     HOWTO   PUBLISHED   2014-1-25   2015-9-24   相关产品   Oracle Applications Technology Stack   信息中心       Information Center: E-Business Suite Utilities (Cloning, Autoconfig, Patching) [1375925.2] Information Center: Patching E-Business Suite Utilities (AD, Clone, Autoconfig) [1377810.2] Information Center: Troubleshooting E-Business Suite Utilities [1377828.2] Information Center: Overview EBS Technology Stack OID and SSO and OAM [1461465.2] Information Center: Using EBS Technology Stack Java [1462269.2] 显示更多   文档引用       How To Apply Patches On Shared Application Tier File System Environment [745580.1]   最近查看   Receiving java.io.FileNotFoundException for the files under java.io.tmpdir during publishing [1449213.1] APPS Packages Become Invalid With ORA-600 [pfri.c: pfri8: plio mismatch] [1323867.1] How To Add a New Disk(s) to An Existing Diskgroup on RAC Cluster or Standalone ASM Configuration (Best Practices). [557348.1] WANT TO RUN ACTUAL COST PROCESS AND CREATE ACCOUNTING IN FINAL MODE FOR INVENTORY ORGANISATION. [1073571.1] Javacache.log flooded With Java.lang.OutOfMemoryError Error Messages [1604874.1] 显示更多

未找到您要查找的产品?

相关内容

产品

• Oracle E-Business Suite > Applications Technology > Technology Components > Oracle Applications Technology Stack > Autoconfig Engine > Feature Requests

关键字

12.0.1; ADCONFIG.PL; APPLICATION INSTALLATIONS; AUTOCONFIG; CONTEXT

错误

SDK.GIF

返回页首

 

Copyright (c) 2015, Oracle. All rights reserved.   Legal Notices and Terms of Use   Privacy Statement