AIX mkramdisk

最新推荐文章于 2019-07-25 22:48:57 发布

转载最新推荐文章于 2019-07-25 22:48:57 发布 · 194 阅读

本文介绍如何使用mkramdisk命令创建不同大小的RAM磁盘，并演示了如何在RAM磁盘上建立JFS和JFS2文件系统的过程。通过具体实例展示了从创建RAM磁盘到挂载使用的完整步骤。

Examples
1 To create a new ram disk using a default 512-byte block size, and the size is 500 MBs (1048576 * 512), enter:

mkramdisk 1048576
/dev/rramdisk0

The /dev/rramdisk0 ramdisk is created.
2 To create a new ramdisk with a size of 500 Megabytes, enter:

mkramdisk 500M
/dev/rramdisk0

The /dev/rramdisk0 ramdisk is created. Note that the ramdisk has the same size as example 1 above.
3 To create a new ram disk with a 2-Gigabyte size, enter:

mkramdisk 2G
/dev/rramdisk0
4 To set up a RAM disk that is approximately 20 MB in size and create a JFS file system on that RAM disk, enter the
following commands:

mkramdisk 40000
ls -l /dev | grep ram
mkfs -V jfs /dev/ramdiskx
mkdir /ramdisk0
mount -V jfs -o nointegrity /dev/ramdiskx /ramdiskx
x is the logical RAM disk number.

To set up a RAM disk that is approximately 20 MB in size and create a JFS2 file system on that RAM disk, enter the
following commands:

mkramdisk 40000
ls -l /dev | grep ram
/sbin/helpers/jfs2/mkfs -V jfs2 /dev/ramdiskx
mkdir /ramdiskx
mount -V jfs2 -o log=NULL /dev/ramdiskx /ramdiskx
x

is the logical RAM disk number. Note: For both JFS and JFS2, for using a file system on a RAM disk, the RAM disk must
be pinned.

Files
/usr/sbin/mkramdisk
Contains the mkramdisk command.

[@more@]

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/350519/viewspace-1056389/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/350519/viewspace-1056389/