exeption MCY1

I need a trigger usuing exeption MCY1 , Please let me know how to do it to when stock reaches to certain below level.

Steps to create Exception Message when Stock is below defined limit
T-Code: MCY1
1) Choose a Exception Name say ZSTOCK and Info structure S039
2) Now click on Characteristics tab and select Char Material by clicking Choose Char at Bottom
3) Now in the same screen Click on Requirements Tab and select Key figure Valuated Stock by clicking Choose Key Figures
4) Click on Define Requirement Tab at bottom and select Threshold value Radio button and Press Continue.Here enter < and Stock qty 10 (Means when Stock qty is <10 then this Exception will trigger)
5) Now Click on Follow up processing tab at Top and tick for Send mail and assign the person id to receive mail and Press back
6) Click on Char values tab to enter the Material nos for which u want to use this exception and SAVE

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/16573195/viewspace-674524/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/16573195/viewspace-674524/