操作系统：Redhat Linux 5.4 32bit
数据库：Oracle 10.2.0.1.0 32bit
下载文件：10201_database_linux32.zip
首先，同样需要执行安装前的检查。
解压安装文件后在database目录下存在一个response目录，静默安装可以使用该目录下的响应文件。
其中，enterprise.rsp对应界面安装中的企业版；standard.rsp对应标准版；custom.rsp对应定制版；dbca.rsp是DBCA静默方式的响应文件；emca.rsp是EMCA的响应文件；netca.rsp是NETCA的响应文件。
静默安装命令：
[oracle@localhost database]$ ./runInstaller -silent -responseFile /home/oracle/database/response/enterprise.rsp
以上命令采用默认设置进行安装，同时创建了一个默认的启动数据库。
一般情况下，需要对安装进行一些定制。此时就需要修改响应文件。以下是enterprise.rsp的详细说明。
####################################################### Copyright(c) Oracle Corporation 1998,2005. All rights reserved.
##
## 通过为下文列出的变量指定值来定制安装。
##
##
## 每个变量都有一个注释。注释说明了变量的类型。
##
##
## 请使用以下格式指定变量的值:
##
## 类型 示例
## String "Sample Value"
## Boolean True or False
## Number 1000
## StringList {"String value 1","String Value 2"}
##
## 指定为的变量是静默安装时必须的参数。
##
##
##
## This response file is generated by Oracle Software Packager.
##
#####################################################
RESPONSEFILE_VERSION=2.2.1.0.0
#------------------------------------------------------------------------------
#Name : UNIX_GROUP_NAME
#Datatype : String
#Description: inventory目录所属的UNIX用户组。
# 通常为oinstall。
#Example : UNIX_GROUP_NAME = "install"
#------------------------------------------------------------------------------
UNIX_GROUP_NAME=
#------------------------------------------------------------------------------
#Name : FROM_LOCATION
#Datatype : String
#Description: 文件products.xml的全路径。
#Example : FROM_LOCATION = "../stage/products.xml"
#------------------------------------------------------------------------------
FROM_LOCATION="../stage/products.xml"
#------------------------------------------------------------------------------
#Name : NEXT_SESSION_RESPONSE
#Datatype : String
#Description: 可选，指定下一会话的响应文件的全路径。
# 如果只给出了文件名称，将会在
# /oraInstall目录中查找该文件。该变量
# 只有当NEXT_SESSION设置为true时有效。
#Example: NEXT_SESSION_RESPONSE = "nextinstall.rsp"
#------------------------------------------------------------------------------
NEXT_SESSION_RESPONSE=
#------------------------------------------------------------------------------
#Name : ORACLE_HOME
#Datatype : String
#Description: Oracle主目录的全路径。
#Example : ORACLE_HOME = "/product/10.2.0/db_1"
#------------------------------------------------------------------------------
ORACLE_HOME=
#------------------------------------------------------------------------------
#Name : ORACLE_HOME_NAME
#Datatype : String
#Description: Oracle主目录名称。用于创建文件与服务。
#Example : ORACLE_HOME_NAME = "OraDbHome1"
#------------------------------------------------------------------------------
ORACLE_HOME_NAME=
#------------------------------------------------------------------------------
#Name : TOPLEVEL_COMPONENT
#Datatype : StringList
#Description: 当前会话安装的顶级组件。
#Example : TOPLEVEL_COMPONENT = {"oracle.server","10.2.0.1.0"}
#------------------------------------------------------------------------------
TOPLEVEL_COMPONENT={"oracle.server","10.2.0.1.0"}
#------------------------------------------------------------------------------
#Name : DEINSTALL_LIST
#Datatype : StringList
#Description: 卸载时卸载的顶级组件列表。
#Example : DEINSTALL_LIST = {"oracle.server","10.2.0.1.0"}
#------------------------------------------------------------------------------
DEINSTALL_LIST={"oracle.server","10.2.0.1.0"}
#------------------------------------------------------------------------------
#Name : SHOW_SPLASH_SCREEN
#Datatype : Boolean
#Description: 设置为true时显示OUI的初始启动画面。
# 静默安装自然需要设置为flase。
#Example : SHOW_SPLASH_SCREEN = true
#------------------------------------------------------------------------------
SHOW_SPLASH_SCREEN=false
#------------------------------------------------------------------------------
#Name : SHOW_WELCOME_PAGE
#Datatype : Boolean
#Description: 设置为true时显示OUI的欢迎界面。
#Example : SHOW_WELCOME_PAGE = false
#------------------------------------------------------------------------------
SHOW_WELCOME_PAGE=false
#------------------------------------------------------------------------------
#Name : SHOW_NODE_SELECTION_PAGE
#Datatype : Boolean
#Description: 设置为true时显示OUI的节点选择界面。
#
# 该变量仅用于执行Oracle Clusterware的升级。
#
#
#Example : SHOW_NODE_SELECTION_PAGE = false
#------------------------------------------------------------------------------
SHOW_NODE_SELECTION_PAGE=false
#------------------------------------------------------------------------------
#Name : SHOW_SUMMARY_PAGE
#Datatype : Boolean
#Description: 设置为true时显示OUI的概要界面。
#
# 概要界面显示了即将安装的组件列表。
#
#
#Example : SHOW_SUMMARY_PAGE = true
#------------------------------------------------------------------------------
SHOW_SUMMARY_PAGE=false
#------------------------------------------------------------------------------
#Name : SHOW_INSTALL_PROGRESS_PAGE
#Datatype : Boolean
#Description: 设置为true时显示OUI的安装进度界面。
#
#
# 该界面显示了当前的安装状态。包含了正在
# 安装的产品与复制的文件。
#
#
#Example : SHOW_INSTALL_PROGRESS_PAGE = true
#------------------------------------------------------------------------------
SHOW_INSTALL_PROGRESS_PAGE=false
#------------------------------------------------------------------------------
#Name : SHOW_CONFIG_TOOL_PAGE
#Datatype : Boolean
#Description: 设置为true时显示OUI的配置助手界面。
#
#
# This page shows the list of configuration assistants that are
# part of this installation and are configured to launch
# automatically. It shows the status of each assistant, including
# any failures with detailed information on why it failed.
#
#Example : SHOW_CONFIG_TOOL_PAGE = true
#------------------------------------------------------------------------------
SHOW_CONFIG_TOOL_PAGE=false
#------------------------------------------------------------------------------
#Name : SHOW_XML_PREREQ_PAGE
#Datatype : Boolean
#Description: This variable determines whether or not to show the prereq page.
#Example : SHOW_XML_PREREQ_PAGE = true
#------------------------------------------------------------------------------
SHOW_XML_PREREQ_PAGE=false
#------------------------------------------------------------------------------
#Name : SHOW_ROOTSH_CONFIRMATION
#Datatype : Boolean
#Description: Set to true if the Confirmation dialog asking to run the root.sh
# script. in OUI needs to be shown.
#Example: SHOW_ROOTSH_CONFIRMATION = false
#------------------------------------------------------------------------------
SHOW_ROOTSH_CONFIRMATION=true
#------------------------------------------------------------------------------
#Name : SHOW_END_SESSION_PAGE
#Datatype : Boolean
#Description: Set to true if the end of session page in OUI needs to be shown.
#
# This page shows if the installation is successful or not.
#
#Example : SHOW_END_SESSION_PAGE = true
#------------------------------------------------------------------------------
SHOW_END_SESSION_PAGE=false
#------------------------------------------------------------------------------
#Name : SHOW_EXIT_CONFIRMATION
#Datatype : Boolean
#Description: Set to true if the confirmation when exiting OUI needs to be shown.
#Example : SHOW_EXIT_CONFIRMATION = true
#------------------------------------------------------------------------------
SHOW_EXIT_CONFIRMATION=false
#------------------------------------------------------------------------------
#Name : NEXT_SESSION
#Datatype : Boolean
#Description: Set to true to allow users to go back to the File Locations page
# for another installation. This flag also needs to be set to true
# in order to process another response file
# (see NEXT_SESSION_RESPONSE).
#Example : NEXT_SESSION = true
#------------------------------------------------------------------------------
NEXT_SESSION=false
#------------------------------------------------------------------------------
#Name : NEXT_SESSION_ON_FAIL
#Datatype : Boolean
#Description: Set to true to allow users to invoke another session even if
# current install session has failed. This flag is only relevant
# if NEXT_SESSION is set to true.
#Example : NEXT_SESSION_ON_FAIL = true
#------------------------------------------------------------------------------
NEXT_SESSION_ON_FAIL=false
#------------------------------------------------------------------------------
#Name : SHOW_DEINSTALL_CONFIRMATION
#Datatype : Boolean
#Description: Set to true if deinstall confimation is needed during a deinstall
# session.
#Example : SHOW_DEINSTALL_CONFIRMATION = true
#------------------------------------------------------------------------------
SHOW_DEINSTALL_CONFIRMATION=false
#------------------------------------------------------------------------------
#Name : SHOW_DEINSTALL_PROGRESS
#Datatype : Boolean
#Description: Set to true if deinstall progress is needed during a deinstall
# session.
#Example : SHOW_DEINSTALL_PROGRESS = true
#------------------------------------------------------------------------------
SHOW_DEINSTALL_PROGRESS=false
#------------------------------------------------------------------------------
#Name : RESTART_SYSTEM
#Datatype : Boolean
#Description: Set to true to allow automatic restart of the system, if set to
# false then installer will exit without restarting, no exit
# confirmation dialog is shown
#Example : RESTART_SYSTEM = false
#------------------------------------------------------------------------------
RESTART_SYSTEM=
#------------------------------------------------------------------------------
#Name : RESTART_REMOTE_SYSTEM
#Datatype : Boolean
#Description: Set to true to allow automatic restart of the remote systems, if
# set to false then installer will not restart the remote systems,
# no exit confirmation dialog is shown
#Example : RESTART_REMOTE_SYSTEM = false
#------------------------------------------------------------------------------
RESTART_REMOTE_SYSTEM=
#------------------------------------------------------------------------------
#Name : REMOVE_HOMES
#Datatype : StringList
#Description: List of the homes to be removed during a deinstall session. Each
# home is represented by its full path.
#Example : REMOVE_HOMES = {,, ...}
#------------------------------------------------------------------------------
REMOVE_HOMES=
#------------------------------------------------------------------------------
#Name : ORACLE_HOSTNAME
#Datatype : String
#Description: This variable holds the hostname of the system as set by the
# user.
#
# It can be used to force the installation to use an alternative
# hostname rather than using the first hostname found on the
# system (e.g., for systems with multiple hostnames and network
# interfaces).
#
#Example : ORACLE_HOSTNAME =
#------------------------------------------------------------------------------
ORACLE_HOSTNAME=
#------------------------------------------------------------------------------
#Name : SHOW_END_OF_INSTALL_MSGS
#Datatype : Boolean
#Description: Set to true if the text on end of install screen is to be shown.
# The text is always available under
# /install/readme.txt.
#Example : SHOW_END_OF_INSTALL_MSGS = true
#------------------------------------------------------------------------------
SHOW_END_OF_INSTALL_MSGS=false
#------------------------------------------------------------------------------
#Name : CLUSTER_NODES
#Datatype : StringList
#Description: This variable represents the cluster node names selected by the
# user for installation.
#Example : CLUSTER_NODES = {"node1","node2"}
#------------------------------------------------------------------------------
CLUSTER_NODES=
#------------------------------------------------------------------------------
#Name : COMPONENT_LANGUAGES
#Datatype : StringList
#Description: Languages in which the components will be installed.
#
# The following choices are available. The value should contain
# only one of these choices.
# en, : English
# fr, : French
# ar, : Arabic
# bn, : Bengali
# pt_BR,: Brazilian Portuguese
# bg, : Bulgarian
# fr_CA,: Canadian French
# ca, : Catalan
# hr, : Croatian
# cs, : Czech
# da, : Danish
# nl, : Dutch
# ar_EG,: Egyptian
# en_GB,: English (United Kingdom)
# et, : Estonian
# fi, : Finnish
# de, : German
# el, : Greek
# iw, : Hebrew
# hu, : Hungarian
# is, : Icelandic
# in, : Indonesian
# it, : Italian
# ja, : Japanese
# ko, : Korean
# es, : Latin American Spanish
# lv, : Latvian
# lt, : Lithuanian
# ms, : Malay
# es_MX,: Mexican Spanish
# no, : Norwegian
# pl, : Polish
# pt, : Portuguese
# ro, : Romanian
# ru, : Russian
# zh_CN,: Simplified Chinese
# sk, : Slovak
# sl, : Slovenian
# es_ES,: Spanish
# sv, : Swedish
# th, : Thai
# zh_TW,: Traditional Chinese
# tr, : Turkish
# uk, : Ukrainian
# vi, : Vietnamese
#
#Example : COMPONENT_LANGUAGES = {"en"}
#------------------------------------------------------------------------------
COMPONENT_LANGUAGES={"en"}
#------------------------------------------------------------------------------
#Name : INSTALL_TYPE
#Datatype : String
#Description: Installation type of the component.
#
# The following choices are available. The value should contain
# only one of these choices.
# EE : Enterprise Edition
# SE : Standard Edition
# Custom : Custom
#Example : INSTALL_TYPE = "EE"
#------------------------------------------------------------------------------
INSTALL_TYPE="EE"
###############################################################################
# #
# Dialog: PRIVILEGED OPERATING SYSTEM GROUPS #
# ------------------------------------------ #
# Provide values for the OS groups you wish to grant OSDBA and OSOPER #
# privileges. If the user performing the install is a member of the group #
# "dba", then that will be used unless specified otherwise below. #
# #
###############################################################################
#------------------------------------------------------------------------------
# Name : s_nameForDBAGrp
# Datatype : String
# Description: The OS group to be granted OSDBA privileges
# Example : s_nameForDBAGrp = "dba"
#------------------------------------------------------------------------------
s_nameForDBAGrp=
#------------------------------------------------------------------------------
# Name : s_nameForOPERGrp
# Datatype : String
# Description: The OS group to be granted OSOPER privileges
# Example : s_nameForDBAGrp = "oper"
#------------------------------------------------------------------------------
s_nameForOPERGrp=
###############################################################################
# #
# Dialog: SELECT CONFIGURATION OPTION #
# ----------------------------------- #
# Please note that you must specificy values for all three entries below in #
# order to supress the Configuration Option Dialog. Even if you choose not #
# to configure an ASM instance, you must specify values for s_ASMSYSPassword #
# and s_ASMSYSPasswordAgain in order for the dialog not to be displayed. If #
# you choose to create a database or perform. a software-only installation, #
# simply leave set these passwords to "". They will be ignored, but are #
# required for proper screen supression. #
# #
###############################################################################
#------------------------------------------------------------------------------
# Name : n_configurationOption
# Datatype : Number
# Description: Determines the type of configuration to perform. for the session.
#
# This entry should be specified as an number. The valid values
# that you can use map to the following options:
# 1 - Create a Database
# 2 - Configure an ASM instance
# 3 - Install Software Only
#
# Example : n_configurationOption=1
#------------------------------------------------------------------------------
n_configurationOption=
#------------------------------------------------------------------------------
# Name : s_ASMSYSPassword
# Datatype : String
# Description: ASM SYS Password
#------------------------------------------------------------------------------
s_ASMSYSPassword=""
#------------------------------------------------------------------------------
# Name : s_ASMSYSPasswordAgain
# Datatype : String
# Description: ASM Sys password confirmation
#------------------------------------------------------------------------------
s_ASMSYSPasswordAgain=""
###############################################################################
# #
# Dialog: SELECT DATABASE CONFIGURATION #
# ------------------------------------- #
# If you chose n_performUpgrade=0 (Do not Upgrade an existing database) and #
# n_configurationOption=1 (Create a Database) then you need to specify the #
# type of database you wish to create. This can be done by selecting one of #
# the three starter database types or by choosing the Advanced configuration #
# option wish allows you to completely customize your database using the #
# DBCA. #
# #
# If you did not choose n_performUpgrade=0 and n_configurationOption=1 #
# then you need not specify values for n_dbType or s_responseFileName. #
# #
###############################################################################
#------------------------------------------------------------------------------
# Name : n_dbType
# Datatype : Number
# Description: Determines the type of database to create.
#
# This entry should be specified as a number. The valid values
# you can specify map to the following options:
# 1 - General Purpose Starter Database
# 2 - Transaction Processing Starter Database
# 3 - Data Warehouse Starter Database
# 4 - Advanced Configuration
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
#
# Example : n_dbType=1
#------------------------------------------------------------------------------
n_dbType=
#------------------------------------------------------------------------------
# Name : s_responseFileName
# Datatype : String
# Description: Stores the location of the DBCA response file for an Advanced
# Configuration.
#
# If you chose to perform. a silent Advanced Configuration by
# specifying n_dbType=4 above, then you need to specify a number
# of additional Advanced Configuration parameters in a response
# file that is used by the DBCA. A template of this response file
# can be found on the installation media in response/dbca.rsp. Use
# this file to completely customize the silent database
# configuration, and set s_responseFileName to the location of
# this response file.
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType=4
#
# Example : oracle.assistants.server:s_responseFileName = "/tmp/dbca.rsp"
#------------------------------------------------------------------------------
oracle.assistants.server:s_responseFileName=
###############################################################################
# #
# Dialog: SPECIFY DATABASE CONFIGURATION OPTIONS #
# ---------------------------------------------- #
# If you chose n_performUpgrade=0 (Do Not Upgrade an existing database), #
# n_configurationOption=1 (Create a Database), and n_dbType = 1, 2 or 3 #
# (i.e., you chose to create a Starter Database), then you can specify the #
# following additional properties of your database here: #
# 1. Database SID and Global Database Name (s_dbSid, s_globalDBName) #
# 2. Database Character Set (s_dbRetChar) #
# 3. Whether you want Example Schemas (b_loadExampleSchemas) #
# #
###############################################################################
#------------------------------------------------------------------------------
# Name : s_globalDBName
# Datatype : String
# Description: The Starter Database Global Database Name
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
#
# Example : s_globalDBName = "mydb.mydomain.com"
#------------------------------------------------------------------------------
s_globalDBName=
#------------------------------------------------------------------------------
# Name : s_dbSid
# Datatype : String
# Description: The Starter Database SID.
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
#
# Example : s_dbSid = "orcl"
#------------------------------------------------------------------------------
s_dbSid=
#------------------------------------------------------------------------------
# Name : s_dbRetChar
# Datatype : String
# Description: The Starter Database Characterset
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
#
# Example : s_dbRetChar = "WE8ISO8859P1"
#------------------------------------------------------------------------------
s_dbRetChar="WE8ISO8859P1"
#------------------------------------------------------------------------------
# Name : b_loadExampleSchemas
# Datatype : Boolean
# Description: This variable controls whether to load Example Schemas onto the
# starter database or not.
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
#
# Example : b_loadExampleSchemas=false
#------------------------------------------------------------------------------
b_loadExampleSchemas=false
###############################################################################
# #
# Dialog: SELECT DATABASE MANAGEMENT OPTION #
# ----------------------------------------- #
# If you chose n_performUpgrade=0 (Do Not Upgrade an existing database), #
# n_configurationOption=1 (Create a Database), and n_dbType = 1, 2 or 3 #
# (i.e., you chose to create a Starter Database), then you can specify the #
# following management options for your Starter Database: #
# 1. Whether to use Database Control or Grid Control to manage your database #
# (b_useDBControl) #
# 2. If you choose to use Database Control, you can choose to receive Email #
# Notifications for critical alerts (b_receiveEmailNotification, #
# s_dlgEMSMTPServer, and s_dlgEMEmailAddress) #
# 3. If you choose to use Grid Control you must specify the Management #
# service that you wish to use. (s_dlgEMCentralAgentSelected) #
# #
###############################################################################
#------------------------------------------------------------------------------
# Name : b_useDBControl
# Datatype : Boolean
# Description: Determines whether to use Database Control or Grid Control to
# manage the database.
#
# This variable also controls the following variables depending on
# its value:
# true: - b_receiveEmailNotification
# - s_dlgEMSMTPServer
# - s_dlgEMEmailAddress
# false:- s_dlgEMCentralAgentSelected
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
#
# Example : b_useDBControl=true
#------------------------------------------------------------------------------
b_useDBControl=true
#------------------------------------------------------------------------------
# Name : b_receiveEmailNotification
# Datatype : Boolean
# Description: Determines whether to receive email notification for critical
# alerts when using DB control.
#
# If set to true, this variable also requires the following
# variables to be set:
# - s_dlgEMSMTPServer
# - s_dlgEMEmailAddress
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_useDBControl=true
#
# Example : b_receiveEmailNotification=false
#------------------------------------------------------------------------------
b_receiveEmailNotification=false
#------------------------------------------------------------------------------
# Name : s_dlgEMSMTPServer
# Datatype : String
# Description: Determines the SMTP server used for email notifications.
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_useDBControl=true
# b_receiveEmailNotification=true
#
# Example : s_dlgEMSMTPServer = "mysmtp.mydomain.com"
#------------------------------------------------------------------------------
s_dlgEMSMTPServer=
#------------------------------------------------------------------------------
# Name : s_dlgEMEmailAddress
# Datatype : String
# Description: Determines the email address the notifications are sent to.
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_useDBControl=true
# b_receiveEmailNotification=true
#
# Example : s_dlgEMEmailAddress = "myemail@mydomain.com"
#------------------------------------------------------------------------------
s_dlgEMEmailAddress=
#------------------------------------------------------------------------------
# Name : s_dlgEMCentralAgentSelected
# Datatype : String
# Description: Determines the Management Service to use if Grid Control is
# selected to manage the database.
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_useDBControl=false
#
# Example : s_dlgEMCentralAgentSelected = "http://myem.mydomain.com:4889/em/upload"
#------------------------------------------------------------------------------
s_dlgEMCentralAgentSelected=
###############################################################################
# #
# Dialog: SPECIFY DATABASE STORAGE OPTION #
# --------------------------------------- #
# If you chose n_performUpgrade=0 (Do Not Upgrade an existing database), #
# n_configurationOption=1 (Create a Database), and n_dbType = 1, 2 or 3 #
# (i.e., you chose to create a Starter Database), then you can specify the #
# type of storage options for your Starter Database using the entries below. #
# #
###############################################################################
#------------------------------------------------------------------------------
# Name : n_dbStorageType
# Datatype : Number
# Description: Determines the type of storage to use for the the database.
#
# This entry should be specified as an number. The valid values
# that you can use map to the following options:
# 1 - Place the data files on a file system
# 2 - Use Automatic Storage Management (ASM)
# 3 - Place the datafiles on raw partitions
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
#
#------------------------------------------------------------------------------
n_dbStorageType=
#------------------------------------------------------------------------------
# Name : s_mountPoint
# Datatype : String
# Description: Location on the file system where you want to place your data
# files
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# n_dbStorageType = 1
#
#------------------------------------------------------------------------------
s_mountPoint=
#------------------------------------------------------------------------------
# Name : s_rawDeviceMapFileLocation
# Datatype : String
# Description: Specifies the location of a the raw devices mapping file.
#
# If you are using raw storage, you must place each tablespace,
# redo log, control file, etc. on a separate raw partition. The
# raw devices mapping file contains a mapping that tells the the
# Database Configuration Assistant (DBCA) which tablespace, redo
# log, etc. to put in which raw device. See the installation
# guide for more information on the raw devices mapping file.
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# n_dbStorageType = 3
#
#------------------------------------------------------------------------------
s_rawDeviceMapFileLocation=
###############################################################################
# #
# Dialog: SPECIFY BACKUP AND RECOVERY OPTIONS #
# ------------------------------------------- #
# If you chose n_performUpgrade=0 (Do Not Upgrade an existing database), #
# n_configurationOption=1 (Create a Database), and n_dbType = 1, 2 or 3 #
# (i.e., you chose to create a Starter Database), then you can specify the #
# out-of-box backup and recovery options for your database using the entries #
# below. #
# #
###############################################################################
#------------------------------------------------------------------------------
# Name : b_enableAutoBackup
# Datatype : Boolean
# Description: Determines whether to enable automated backups or not.
#
# If you set this entry to TRUE, then values for the the following
# additional entries also need to be set:
# - b_useFileSystemForRecovery
# - s_dlgRBORecoveryLocation
# - s_dlgRBOUsername
# - s_dlgRBOPassword
#
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
#
# Example : b_enableAutoBackup=true
#------------------------------------------------------------------------------
b_enableAutoBackup=false
#------------------------------------------------------------------------------
# Name : b_useFileSystemForRecovery
# Datatype : Boolean
# Description: Determines whether to use a file system or ASM for storing files
# related to backup and recovery of your database.
#
# If set to TRUE, then the file system will be used. If set to
# FALSE, then ASM will be used. This entry is only relevant if
# b_enableAutoBackup is set to TRUE above.
#
# If you set this entry to TRUE (use the file system), then you
# should also specify a value for:
# - s_dlgRBORecoveryLocation
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_enableAutoBackup=true
#
# Example : b_useFileSystemForRecovery=true
#------------------------------------------------------------------------------
b_useFileSystemForRecovery=true
#------------------------------------------------------------------------------
# Name : s_dlgRBORecoveryLocation
# Datatype : String
# Description: If using a file system for storing backup and recovery files,
# this entry is used for specifying the location on the file
# system for storing these files..
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_enableAutoBackup=true
# b_useFileSystemForRecovery=true
#
# Example : s_dlgRBORecoveryLocation="/u01/app/oracle/flash_recovery_area"
#------------------------------------------------------------------------------
s_dlgRBORecoveryLocation=
#------------------------------------------------------------------------------
# Name : s_dlgRBOUsername
# Datatype : String
# Description: Regardless of the type of storage you choose for backup and
# recovery, if you decide to enable automated backups, a job will
# be scheduled to run daily at 2:00 AM to backup your database.
#
# This job will run as the operating system user that you specify
# using this entry.
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_enableAutoBackup=true
#
# Example : s_dlgRBOUsername = "oracle"
#------------------------------------------------------------------------------
s_dlgRBOUsername=
#------------------------------------------------------------------------------
# Name : s_dlgRBOUsername
# Datatype : String
# Description: Regardless of the type of storage you choose for backup and
# recovery, if you decide to enable automated backups, a job will
# be scheduled to run daily at 2:00 AM to backup your database.
#
# This job will run as the operating system user specified by
# the above entry s_dlgRBOUsername. This entry stores the
# the password for the above operating system user.
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_enableAutoBackup=true
#
#------------------------------------------------------------------------------
s_dlgRBOPassword=
###############################################################################
# #
# Dialog: CONFIGURE AUTOMATIC STORAGE MANAGEMENT #
# ---------------------------------------------- #
# If you chose n_performUpgrade=0 (Do Not Upgrade an existing database), #
# n_configurationOption=1 (Create a Database), n_dbType = 1, 2 or 3, and #
# n_dbStorageType=2 (use ASM) #
# #
# -- OR -- #
# #
# If you chose n_performUpgrade=0 (Do Not Upgrade an existing database), #
# n_configurationOption=1 (Create a Database), n_dbType = 1, 2 or 3, #
# b_enableAutoBackup=true, and b_useFileSystemForRecovery=false (use ASM #
# for backup and recovery) #
# #
# -- OR -- #
# #
# If you chose n_performUpgrade=0 and n_configurationOption=2 (configure #
# Automatic Storage Management) #
# #
# Then you need to specify configuration parameters for your Automatic #
# Storage Management instance. Do so using the entries below. #
# #
# -------------- #
# #
# NOTE: For single instance configurations of ASM, Cluster #
# Synchronization Services (CSS) must be configured as root prior to the #
# the creation of the ASM instance using the DBCA. Thus, for silent #
# configurations of Automatic Storage Management, the DBCA will not be #
# launched automatically at the end of the installation. This will give #
# you the opportunity to run root.sh after the installation portion is #
# is complete but before configuration begins. #
# #
# Instead, the values you enter here are stored for later use. After you run #
# root.sh, you can execute the file: #
# #
# $ORACLE_HOME/cfgtoollogs/configToolAllCommands #
# #
# This will launch the configuration tools using the values saved from this #
# response file. #
# #
###############################################################################
#------------------------------------------------------------------------------
#Name : s_dlgASMCfgDiskGroupName
#Datatype : String
#Description: Stores the name of the disk group you are creating within ASM
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# n_dbStorageType = 2
#
# -- OR --
#
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_enableAutoBackup=true
# b_useFileSystemForRecovery=false
#
# -- OR --
#
# n_configurationOption=2
# n_performUpgrade=0
#
# Example : s_dlgASMCfgDiskGroupName="DATA"
#------------------------------------------------------------------------------
s_dlgASMCfgDiskGroupName="DATA"
#------------------------------------------------------------------------------
#Name : s_dlgASMCfgDiskDiscoveryString
#Datatype : String
#Description: The Disk Discovery path contains a set of regular expressions
# that are used to identify candidate disks for ASM to use.
#
# By default, ASM searches in a platform-specific location for
# candidate disks. See the installation guide for more details
# on the Disk Discovery Path. If disks are located in the
# operating system specific default location, you need not change
# the value of this variable.
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# n_dbStorageType = 2
#
# -- OR --
#
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_enableAutoBackup=true
# b_useFileSystemForRecovery=false
#
# -- OR --
#
# n_configurationOption=2
# n_performUpgrade=0
#
# Example : s_dlgASMCfgDiskDiscoveryString="/dev/raw/*"
#------------------------------------------------------------------------------
s_dlgASMCfgDiskDiscoveryString=
#------------------------------------------------------------------------------
#Name : n_dlgASMCfgRedundancySelected
#Datatype : Number
#Description: Specifies the redundancy level that Automatic Storage Management
# will use.
#
# This entry must be specified as one of the following numbers
# which map to different redundancy levels:
# 1 - External redundancy (no mirroring)
# 2 - Normal redundancy (two-way mirroring)
# 3 - High redundancy (three-way mirroring)
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# n_dbStorageType = 2
#
# -- OR --
#
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_enableAutoBackup=true
# b_useFileSystemForRecovery=false
#
# -- OR --
#
# n_configurationOption=2
# n_performUpgrade=0
#
# Example : n_dlgASMCfgRedundancySelected=2
#------------------------------------------------------------------------------
n_dlgASMCfgRedundancySelected=
#------------------------------------------------------------------------------
# Name : sl_dlgASMCfgSelectableDisks
# Datatype : StringList
# Description: Specifies the disks that can be made part of the disk group
# created during the installation.
#
# This list of disks contains the path to the disk in question
# and the size of the disk in MB. Specify the disks you
# wish to use for ASM storage as alternative pairs of
# , .
#
# The set of disks you wish to use should be specified in two
# places - this variable as well as the following variable:
# - sl_dlgASMCfgDiskSelections
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# n_dbStorageType = 2
#
# -- OR --
#
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_enableAutoBackup=true
# b_useFileSystemForRecovery=false
#
# -- OR --
#
# n_configurationOption=2
# n_performUpgrade=0
#
# Example : sl_dlgASMCfgSelectableDisks={"/dev/raw/asm1","1800","/dev/raw/asm2","1800","/dev/raw/asm3","1800","/dev/raw/asm4","1800"}
#------------------------------------------------------------------------------
sl_dlgASMCfgSelectableDisks=
#------------------------------------------------------------------------------
# Name : sl_dlgASMCfgDiskSelections
# Datatype : StringList
# Description: Specifies the disks that will be made part of the disk group
# created during the installation.
#
# This list of disks contains the path to the disk in question
# and the size of the disk in MB. Specify the disks you
# wish to use for ASM storage as alternative pairs of
# , .
#
# The set of disks you wish to use should be specified in two
# places - this variable as well as the following variable:
# - sl_dlgASMCfgSelectableDisks
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# n_dbStorageType = 2
#
# -- OR --
#
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_enableAutoBackup=true
# b_useFileSystemForRecovery=false
#
# -- OR --
#
# n_configurationOption=2
# n_performUpgrade=0
#
# Example : sl_dlgASMCfgDiskSelections={"/dev/raw/asm1","1800","/dev/raw/asm2","1800","/dev/raw/asm3","1800","/dev/raw/asm4","1800"}
#------------------------------------------------------------------------------
sl_dlgASMCfgDiskSelections=
###############################################################################
# #
# Dialog: SELECT ASM DISK GROUP #
# ----------------------------- #
# If you chose n_performUpgrade=0 (Do Not Upgrade an existing database), #
# n_configurationOption=1 (Create a Database), n_dbType = 1, 2 or 3, and #
# n_dbStorageType=2 (use ASM) #
# #
# -- OR -- #
# #
# If you chose n_performUpgrade=0 (Do Not Upgrade an existing database), #
# n_configurationOption=1 (Create a Database), n_dbType = 1, 2 or 3, #
# b_enableAutoBackup=true, and b_useFileSystemForRecovery=false (use ASM #
# for backup and recovery) #
# #
# -- AND -- #
# #
# If you are installing on a system where an ASM instance already exists #
# #
# Then you can use the existing ASM instance for storage. As part of the #
# the installation, you cannot create a new disk group in this case. You can #
# only use one of the existing Disk groups in your existing ASM instance. #
# #
# If there is not enough free space in your existing disk group to store #
# the additional data that you wish to store, then the installer will allow #
# you to add existing disks to the disk group you select to use. This can #
# be done silently by specifying the values for: #
# #
# - s_dlgASMCfgDiskGroupName #
# - s_dlgASMCfgDiskDiscoveryString #
# - n_dlgASMCfgRedundancySelected #
# - sl_dlgASMCfgSelectableDisks #
# - sl_dlgASMCfgDiskSelections #
# #
# in the section above. #
# #
# If you wish to create a new database, store database or backup and #
# recovery files in an existing ASM instance, and create new disks groups #
# for this purpose (rather than having to use an existing disk group, then #
# you should perform. a software only installation and then use the Database #
# Configuruation Assistant (DBCA) to create disk groups in an existing ASM #
# instance. #
# #
###############################################################################
#------------------------------------------------------------------------------
# Name : sl_dlgASMDskGrpSelectedGroup
# Datatype : StringList
# Description: Specifies the existing disk group in an existing ASM instance
# that you want to use for storage.
#
# The disk group must be specified as a set of entries in a
# string list. The entries in the string list consist of the
# 1. disk group name
# 2. the total space in the disk group (in MB)
# 3. the available space in the disk group (in MB)
# 4. the redundancy level of the disk group
#
# These values can be obtained easily by executing the following
# command from the Oracle Home where your existing ASM instance
# is running (you must set the ORACLE_HOME environment variable
# prior to running the command):
#
# $ORACLE_HOME/bin/kfod p=groups _asmsid='+ASM'
#
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# n_dbStorageType = 2
#
# -- OR --
#
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_enableAutoBackup=true
# b_useFileSystemForRecovery=false
#
# Example : sl_dlgASMDskGrpSelectedGroup={"DATA","3600","3498","NORMAL"}
#------------------------------------------------------------------------------
sl_dlgASMDskGrpSelectedGroup={" "," "," "," "}
###############################################################################
# #
# Dialog: SELECT DATABASE MANAGEMENT OPTION (ASM only configuration) #
# ------------------------------------------------------------------ #
# If you chose n_performUpgrade=0 (Do Not Upgrade an existing database), #
# and n_configurationOption=2 (Confiugure an ASM instance) and if you already #
# have installed an Enterprise Manager Grid Control Agent on the system, you #
# have the option of centrally managing your ASM instance. You can do so by #
# setting the variables below. #
# #
# NOTE: If you choose to Configure an ASM instance in its own ORACLE_HOME, #
# (which is recommended) there is no option to manage this instance using #
# Database Control. Grid Control Management is an option that you can #
# configure from the installation if you already have an Grid Control Agent #
# installed. You can always install a Grid Control Agent after configuration #
# which will discover and allow you to manage this instance. In addition, #
# you can manage the ASM instance using Database Control once you configure #
# a database that uses the ASM instance (using the Database Control that is #
# is configured with that database.) #
# #
###############################################################################
#------------------------------------------------------------------------------
# Name : b_centrallyManageASMInstance
# Datatype : Boolean
# Description: Governs whether the ASM instance is to be managed by Grid
# Control or not.
#
# Note that this option is only relevant if you choose
# n_configurationOption=2 (Configure an ASM instance), and if
# you already have a Grid Control Agent on the system that can
# be used for central management. If you have such an Agent, and
# you wish to use it to centrally manage your ASM instance, then
# you must also set the following variable as documented above,
# which specifies which Management Service you wish to use:
# - s_dlgEMCentralAgentSelected
#
# Example : b_centrallyManageASMInstance=true
#------------------------------------------------------------------------------
b_centrallyManageASMInstance=true
###############################################################################
# #
# Dialog: SPECIFY DATABASE SCHEMA PASSWORDS #
# ----------------------------------------- #
# If you chose n_performUpgrade=0 (Do Not Upgrade an existing database), #
# n_configurationOption=1 (Create a Database), and n_dbType = 1, 2 or 3 #
# (i.e., you chose to create a Starter Database), then you can specify the #
# the passwords for the following four schemas in your starter database: #
# SYS #
# SYSTEM #
# SYSMAN (used by Enterprise Manager) #
# DBSNMP (used by Enterprise Manager) #
# #
# You can choose to use the same password for all accounts (not recommended) #
# or you can specify different passwords for each account (recommended) #
# #
###############################################################################
#------------------------------------------------------------------------------
# Name : b_useSamePassword
# Datatype : Boolean
# Description: Determines whether the same password is set for each database
# schema or whether different passwords should be specified.
#
# If b_useSamePassword=true, then you must specify the password
# that will be used for all accounts using:
# - s_superAdminSamePasswd
# - s_superAdminSamePasswdAgain
#
# If b_useSamePassword=false, then you must specify the passwords
# the will be used for each account using:
# - sl_superAdminPasswds
# - sl_superAdminPasswdsAgain
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
#
# Example : b_useSamePassword=false
#------------------------------------------------------------------------------
b_useSamePassword=true
#------------------------------------------------------------------------------
# Name : s_superAdminSamePasswd
# Datatype : String
# Description: Stores the password to be used for all accounts.
#
# NOTE: In order to perform. the silent install successfully, you
# must specify the same password in both variables:
# - s_superAdminSamePasswd
# - s_superAdminSamePasswdAgain
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_useSamePassword=true
#
#------------------------------------------------------------------------------
s_superAdminSamePasswd=
#------------------------------------------------------------------------------
# Name : s_superAdminSamePasswdAgain
# Datatype : String
# Description: Stores the password to be used for all accounts.
#
# NOTE: In order to perform. the silent install successfully, you
# must specify the same password in both variables:
# - s_superAdminSamePasswd
# - s_superAdminSamePasswdAgain
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_useSamePassword=true
#
#------------------------------------------------------------------------------
s_superAdminSamePasswdAgain=
#------------------------------------------------------------------------------
# Name : s_superAdminSamePasswd
# Datatype : String
# Description: Stores the password to be used for each of the database schemas
# SYS, SYSTEM, SYSMAN, and DBSNMP.
#
# NOTE: In order to perform. the silent install successfully, you
# must specify the same passwords for each schema using both:
# - sl_superAdminSamePasswds
# - sl_superAdminSamePasswdsAgain
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_useSamePassword=false
#
# Example : sl_superAdminPasswds = {"","","",""}
#------------------------------------------------------------------------------
sl_superAdminPasswds=
#------------------------------------------------------------------------------
# Name : s_superAdminSamePasswdAgain
# Datatype : String
# Description: Stores the password to be used for each of the database schemas
# SYS, SYSTEM, SYSMAN, and DBSNMP.
#
# NOTE: In order to perform. the silent install successfully, you
# must specify the same passwords for each schema using both:
# - sl_superAdminSamePasswds
# - sl_superAdminSamePasswdsAgain
#
# Pre-requsites for setting this variable:
# n_configurationOption=1
# n_performUpgrade=0
# n_dbType = 1, 2, or 3
# b_useSamePassword=false
#
# Example : sl_superAdminPasswdsAgain = {"","","",""}
#------------------------------------------------------------------------------
sl_superAdminPasswdsAgain=
###############################################################################
# #
# Dialog: UPGRADE AN EXISTING DATABASE #
# ------------------------------------ #
# Databases prior to 10.2.0.1.0 may be upgraded after the installation using #
# the Database Upgrade Assistant. If you have databases prior to 10g #
# Release 2 (10.2.0.1.0) on your system, then the installation displays a #
# dialog allowing you to upgrade one of those databases directly from the #
# installation. If any of your databases use ASM for storage, you can choose #
# to upgrade just the ASM instance, just the database, or both. #
# #
###############################################################################
#------------------------------------------------------------------------------
# Name : n_performUpgrade
# Datatype : Number
# Description: Determines whether to perform. an upgrade during the installation
# or not.
#
# If n_performUpgrade=1, then an upgrade will be performed at the
# end of the installation. In this case, you must also specify
# the values of one or both of the following:
# - n_upgradeDB
# - n_upgradeASM
#
# IMPORTANT INFO: If n_performUpgrade=0, then an upgrade will not
# be performed, and you can choose to create a new database using
# the variables as documented above. However, if you set
# n_performUpgrade=0, then use the following values ONLY for the
# respective variables:
# - n_upgradeDB=0
# - s_dbOHSelectedForUpgrade=""
# - s_dbSIDSelectedForUpgrade=""
# - n_upgradeASM=0
# - s_dbSelectedUsesASM="no"
#
# Example : n_performUpgrade=0
#------------------------------------------------------------------------------
n_performUpgrade=0
#------------------------------------------------------------------------------
# Name : n_upgradeDB
# Datatype : Number
# Description: Specifies whether the user wishes to perform. an upgrade of a
# database (in addition to or as opposed to upgrading an ASM
# instance)
#
# This value must be specified as a number, which maps to the
# following behavior.:
# 1 - Upgrade a database
# 0 - Do Not Upgrade a Database
#
# If n_upgradeDB=1, then you must also specify values for the
# following variables:
# - s_dbOHSelectedForUpgrade
# - s_dbSIDSelectedForUpgrade
#
# Pre-requsites for setting this variable:
# n_performUpgrade=1
#
# Example : n_upgradeDB = 1
#------------------------------------------------------------------------------
n_upgradeDB=0
#------------------------------------------------------------------------------
# Name : s_dbOHSelectedForUpgrade
# Datatype : String
# Description: Specifies the Oracle Home of the database you wish to upgrade.
#
# If s_dbOHSelectedForUpgrade is set to something other than "",
# then you must also specify values for the following variable:
# - s_dbSelectedUsesASM
#
# Pre-requsites for setting this variable:
# n_performUpgrade=1
# n_upgradeDB=1
#
# Example : s_dbOHSelectedForUpgrade = "/u01/app/oracle/9.2.0/db"
#------------------------------------------------------------------------------
s_dbOHSelectedForUpgrade=""
#------------------------------------------------------------------------------
# Name : s_dbSIDSelectedForUpgrade
# Datatype : String
# Description: Specifies the SID (for single instance) or database name (for
# RAC of the database you wish to upgrade.
#
# Pre-requsites for setting this variable:
# n_performUpgrade=1
# n_upgradeDB=1
#
# Example : s_dbSIDSelectedForUpgrade = "orcl"
#------------------------------------------------------------------------------
s_dbSIDSelectedForUpgrade=""
#------------------------------------------------------------------------------
# Name : n_upgradeASM
# Datatype : Number
# Description: Specifies whether the user wishes to perform. an upgrade of the
# ASM instance (in addition to or as opposed to upgrading a
# database)
#
# This value must be specified as a number, which maps to the
# following behavior.:
# 1 - Upgrade ASM
# 0 - Do Not Upgrade ASM
#
# Pre-requsites for setting this variable:
# n_performUpgrade=1
#
# Example : n_upgradeASM = 1
#------------------------------------------------------------------------------
n_upgradeASM=0
#------------------------------------------------------------------------------
#Name : s_dbSelectedUsesASM
#Datatype : Boolean
#Description: "Yes" if db selected uses ASM, else "No"
#Component : oracle.server
# Pre req:
# n_performUpgrade=1
# n_upgradeDB=1
#------------------------------------------------------------------------------
s_dbSelectedUsesASM="no"
###############################################################################
# #
# ENTRIES LISTED IN THIS SECTION SHOULD NOT BE MODIFIED. THEY ARE NEEDED IN #
# THE RESPONSE FILE FOR PROPER FUNCTIONING OF THE SILENT INSTALLATION, BUT #
# THEY SHOULD NOT BE MODIFIED. #
# #
###############################################################################
#------------------------------------------------------------------------------
#Name : sl_upgradableSIDBInstances
# sl_upgradableRACDBInstances
#Datatype : Boolean
#Description: Contains the upgradable DB instances
#Component : oracle.server
#------------------------------------------------------------------------------
############################################
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
############################################
sl_upgradableSIDBInstances={}
sl_upgradableRACDBInstances={}
#------------------------------------------------------------------------------
#Name : n_dbSelection
#Datatype : Number
#Description: row selected in the spread table of upgradable DB instances
#Component : oracle.server
#------------------------------------------------------------------------------
############################################
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
############################################
n_dbSelection=0
#------------------------------------------------------------------------------
#Name : b_stateOfUpgradeASMCheckbox
#Datatype : Boolean
#Description: stores the state of checkbox in UI
#Component : oracle.server
#------------------------------------------------------------------------------
############################################
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
############################################
b_stateOfUpgradeASMCheckbox=false
#------------------------------------------------------------------------------
#Name : b_stateOfUpgradeDBCheckbox
#Datatype : Boolean
#Description: stores the state of checkbox in UI
#Component : oracle.server
#------------------------------------------------------------------------------
############################################
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
############################################
b_stateOfUpgradeDBCheckbox=false
#------------------------------------------------------------------------------
#Name : b_oneClick
#Datatype : Boolean
#Description: Governs one-click behavior
#------------------------------------------------------------------------------
############################################
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
############################################
b_oneClick=false
#------------------------------------------------------------------------------
#Name : s_dlgASMCfgRedundancyValue
#Datatype : String
#Description: Redundancy Value
#Component : oracle.server
#------------------------------------------------------------------------------
############################################
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
############################################
s_dlgASMCfgRedundancyValue=""
#------------------------------------------------------------------------------
#Name : s_dlgASMCfgExistingFreeSpace
#Datatype : String
#Description: Existing Freee Space
#Component : oracle.server
#------------------------------------------------------------------------------
############################################
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
############################################
s_dlgASMCfgExistingFreeSpace="0"
#------------------------------------------------------------------------------
#Name : s_dlgASMCfgNewDisksSize
#Datatype : String
#Description: New Disks Size
#Component : oracle.server
#------------------------------------------------------------------------------
############################################
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
############################################
s_dlgASMCfgNewDisksSize=""
#------------------------------------------------------------------------------
#Name : s_dlgASMCfgAdditionalSpaceNeeded
#Datatype : String
#Description: Additional Space Needed for ASM configuration
#Component : oracle.server
#------------------------------------------------------------------------------
############################################
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
############################################
s_dlgASMCfgAdditionalSpaceNeeded="0 MB"
来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/24945919/viewspace-743024/，如需转载，请注明出处，否则将追究法律责任。
转载于:http://blog.itpub.net/24945919/viewspace-743024/
扫一扫
960
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
