环境
AIX 6.1
GI和oracle版本 12.1.0.2
两节点RAC
故障现象1:
执行安装前检查时,出现WARNING
grid[df_custdb1]/ora12c/orasoft/grid> ./runcluvfy.sh stage -pre crsinst -n df_custdb1,df_custdb2 -fixup -verbose
WARNING:
PRVG-11322 : One or more node names "df_custdb1,df_custdb2" contain one or more of the following invalid characters "_"
故障现象2:
安装grid时,出现报错。

[INS-30131] Initial setup required for the execution of installer validations failed.
PRVG-11322 : One or more node names "df_custdb1 " contain one or more of the following invalid characters "_"
原因:aix主机名有下划线导致。从orace 12.1.0.2 开始,主机名不支持下划线。支持横杆“-”。
参考文档:1957895.1
解决方法:将主机名中的下划线修改为横杠“-”,问题解决。
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/24626891/viewspace-2109536/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/24626891/viewspace-2109536/
本文介绍在AIX6.1环境下安装Oracle 12.1.0.2 RAC过程中遇到的两个故障现象及解决办法。一是主机名包含下划线导致的WARNING提示;二是安装时因主机名无效字符引发的错误。文章提供了具体解决方案,并指出正确的主机名设置。
1259

被折叠的 条评论
为什么被折叠?



