nginx重试机制proxy_next_upstream

本文深入解析Nginx作为反向代理服务器时的重试机制,包括如何配置proxy_next_upstream和proxy_next_upstream_tries参数来实现容错和负载均衡,以及这些参数的具体作用。

nginx作为反向代理服务器,后端RS有多台服务器,上层通过一定机制保证容错和负载均衡。

nginx的重试机制就是容错的一种

官方链接:http://nginx.org/en/docs/http/ngx_http_proxy_module.html#proxy_next_upstream

proxy_next_upstream error | timeout | invalid_header | http_500 | http_502 | http_503 | http_504 | http_403 | http_404 | http_429 | non_idempotent | off ...;
Default:    proxy_next_upstream error timeout;
Context:    http, server, location

指定应将请求传递到下一个服务器的情况:
error             # 与服务器建立连接,向其传递请求或读取响应头时发生错误;
timeout           # 在与服务器建立连接,向其传递请求或读取响应头时发生超时;
invalid_header    # 服务器返回空的或无效的响应;
http_500          # 服务器返回代码为500的响应;
http_502          # 服务器返回代码为502的响应;
http_503          # 服务器返回代码为503的响应;
http_504          # 服务器返回代码504的响应;
http_403          # 服务器返回代码为403的响应;
http_404          # 服务器返回代码为404的响应;
http_429          # 服务器返回代码为429的响应(1.11.13);
non_idempotent    # 通常,请求与 非幂等 方法(POST,LOCK,PATCH)不传递到请求是否已被发送到上游服务器(1.9.13)的下一个服务器; 启用此选项显式允许重试此类请求;
off               # 禁用将请求传递给下一个服务器。

下面还有一个参数影响重试次数,0表示不限制。:

Syntax:     proxy_next_upstream_tries number;
Default:    proxy_next_upstream_tries 0;
Context:    http, server, location

举例如下:

复制代码

upstream app-proxy {
    server 192.168.5.100:8080;
    server 192.168.5.101:8080;
    check interval=2000 rise=1 fall=3 timeout=3000 type=http;
    check_keepalive_requests 1;
#    check_http_send "HEAD /status/status.html HTTP/1.1\r\n\r\n"; 
    check_http_send "GET /status/status.html HTTP/1.1\r\nConnection: close\r\nHost: localhost\r\n\r\n"; 
    check_http_expect_alive http_2xx http_3xx;
}

location / {
      proxy_pass         http://app-proxy;
      proxy_next_upstream error timeout http_500 http_502 http_503 http_504;
      proxy_next_upstream_tries 3;
      proxy_connect_timeout 60s;
      proxy_read_timeout 60s;
      proxy_send_timeout 60s;
      proxy_pass_request_headers      on;
      proxy_set_header   Host             $host:$server_port;
      proxy_set_header   X-Real-IP        $remote_addr;
      proxy_set_header   X-Forwarded-For  $proxy_add_x_forwarded_for;
      set $domain default;

复制代码

 

<think>根据提供的引用和用户问题,用户遇到了"nginx: [emerg] 'proxy_next_upstream' directive is not allowed here"错误。这个错误通常是因为指令被放置在了错误的上下文中。 引用[1]、[3]、[4]都涉及了类似的错误(如upstream、stream、server指令的位置错误),解决方法都是将指令移到正确的上下文中。特别是引用[1]和[3]明确指出,upstream块必须放在http块内,server块外。 同样,proxy_next_upstream指令也有其特定的上下文要求。根据Nginx官方文档,proxy_next_upstream指令只能用于http、server或location块中,但不能在upstream块中使用。 用户错误信息显示proxy_next_upstream指令被放在了不允许的位置,很可能是放在了upstream块中。正确的做法应该是将proxy_next_upstream放在location块中(或server块、http块中)。 因此,解决方案是: 1. 检查nginx配置文件,找到proxy_next_upstream指令所在位置。 2. 如果它在upstream块内,将其移出并放到对应的location块或server块中。 示例: 错误配置(在upstream块中使用proxy_next_upstream): ```nginx upstream my_backend { server 127.0.0.1:8080; proxy_next_upstream error timeout; # 错误:不能在upstream块中使用 } ``` 正确配置(将proxy_next_upstream移到location块): ```nginx upstream my_backend { server 127.0.0.1:8080; } server { listen 80; server_name example.com; location / { proxy_pass http://my_backend; proxy_next_upstream error timeout; # 正确:在location块中使用 } } ``` 这样修改后,重新加载Nginx配置即可解决错误。 </think>### 解决 Nginx `proxy_next_upstream` 指令位置错误的方法 当出现 `nginx: [emerg] 'proxy_next_upstream' directive is not allowed here` 错误时,核心原因是**指令被放置在错误的配置上下文中**。根据引用内容[1][3][4]的解决思路和 Nginx 官方规范,解决方法如下: #### 错误原因分析 1. `proxy_next_upstream` **只能出现在特定上下文**: - ✅ 允许位置:`http` 块、`server` 块或 `location` 块内 - ❌ 禁止位置:`upstream` 块、配置文件根层级或其他模块内部 2. 常见错误场景: ```nginx # 错误示例:放在 upstream 块内 upstream my_backend { server 127.0.0.1:8080; proxy_next_upstream error timeout; # 此处不允许! } ``` #### 正确解决方案 将 `proxy_next_upstream` **移到对应的 `location` 或 `server` 块中**: ```nginx # 正确位置:在 location/server 块内 upstream my_backend { server 127.0.0.1:8080; } server { listen 80; server_name example.com; location / { proxy_pass http://my_backend; proxy_next_upstream error timeout; # ✅ 正确位置 proxy_next_upstream_timeout 3s; # 相关超时参数 } } ``` #### 验证与重载配置 1. 检查配置文件语法: ```bash nginx -t # 输出应显示 "syntax is ok" ``` 2. 重载 Nginx: ```bash nginx -s reload ``` #### 关键注意事项 1. **指令层级关系**: - `upstream` 定义后端服务器组(仅包含 `server` 指令) - `proxy_*` 系列指令属于**请求处理逻辑**,必须放在 `location` 或 `server` 中 2. 典型参数组合(在 `location` 块内): ```nginx proxy_next_upstream error timeout http_500 http_502; proxy_next_upstream_tries 3; # 最大重试次数 proxy_next_upstream_timeout 2s; # 重试超时 ``` > ⚠️ 如果错误涉及模块缺失(如引用[2]的 `stream` 模块问题),需重新编译 Nginx 添加对应模块,但 `proxy_next_upstream` 属于核心模块无需额外编译[^1][^2][^3][^4]。 --- ### 相关问题 1. `proxy_next_upstream` 和 `proxy_pass` 的配置顺序是否有严格要求? 2. 如何调试 Nginxupstream 请求重试机制? 3. 除了位置错误,还有哪些原因会导致 Nginx 报 `directive is not allowed here` 错误? 4. `proxy_next_upstream` 支持哪些具体的错误类型(如超时、连接拒绝等)?
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值