[指导]HP ProBook/EliteBook/Zbook系列笔记本clover安装黑苹果

原文链接：https://www.tonymacx86.com/threads/guide-hp-probook-elitebook-zbook-using-clover-uefi-hotpatch-10-11.189416/

原文作者：RehabMan

   

前提(摘自国外原版教程)，这部分放在前面，是希望大家看一下，不要被吓到，后面的教程经过简化说明。

推荐大家阅读原版:https://www.tonymacx86.com/threads/guide-hp-probook-elitebook-zbook-using-clover-uefi-hotpatch-10-11.189416/，参照我的中文教程，应该不会有太多困难。

   

本教程适用于elitebook/probook/zbook下列机型：

- 6-series laptop (Sandy Bridge): HP Probook 4x30s, 6x60b, Elitebook 2x60p, 8x60p, 8x60w

- 7-series laptop (Ivy Bridge or Sandy Bridge): HP Probook 4x40s, 4x0 G0, 6x70b, Elitebook 8x70p, 2x70p, 9470m

- 8-series laptop (Haswell): HP 3x0 G1, Probook 4x0 G1/G2, Elitebook 8x0 G1, ZBook G1, Folio 1040 G1

- 9-series laptop (Broadwell): HP Probook 4x0/6x0/8x0/ZBook G2

- 100-series laptop (Skylake): HP ProBook 4x0 G3 is experimental (probably incomplete), but reported as working.

- 100-series laptop (Kabylake): HP ProBook 4x0 G4 is experimental (probably incomplete), supported with the 'beta' branch and is currently reported as working.

   

推荐兼容的无线网卡：

Here is the list of recommended compatible wifi cards:

- HP Probook 4x30s: the laptop has whitelist BIOS, so only usable card is HP-branded Atheros AR5B195 (HP part# 593127-001). You can also use a rebranded AR5BHB92 (AR9280).

- HP Probook 6x60b/5330m, HP Elitebook 8x60p/2x60p: the laptop has whitelist BIOS, so only usable card is HP-branded Broadcom 43224HMS (582564-001/582564-002)

- For laptops with NGFF/M.2 WiFi slot: BCM94352Z or BCM94350ZAE (? not tested/not recommended) or BCM943602BAED (works but may require additional antenna leads to be installed)

- Other laptop:

WIFI ONLY: Atheros AR9280/9285, Broadcom 4322/43224 (better OS X feature support)

WIFI+BT: AR5B195 (not recommended), Broadcom 43225HMB/4352HMB (better OS X feature support)

   

BIOS设置：

To start, set BIOS to defaults.

Then insure:

- UEFI boot is enabled (hybrid/with CSM for best result)

- secure boot is disabled

- disable fast boot

- IGPU graphics memory set to 64mb (Broadwell and Skylake)

- disable the serial port via BIOS option if available

- disable "LAN/WLAN switching" if available

- disable "Extended Idle Power States" if you find it under "Power Management Options"

- disable "Wake on LAN" and "Wake on USB"

- disable Firewire/IEEE 1394 if your laptop has it

   

特殊说明：

- Definitely copy RealtekRTL8111.kext and IntelMausiEthernet.kext to Clover/kexts/Other as having network support during post-install is required (the rest of this guide depends on it). An alternative is to copy FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, and ProBookAtheros.kext to Clover/kexts/Other. This will enable WiFi, provided you have compatible WiFi hardware already installed.

   

Note: FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext are available here: https://github.com/RehabMan/OS-X-Fake-PCI-ID. ProBookAtheros.kext is available in the 4x30s DSDT patch github: https://github.com/RehabMan/HP-ProBook-4x30s-DSDT-Patch (download the ZIP of the entire github project).

   

- GenericUSBXHCI.kext is not necessary with most laptops covered by this guide since AppleUSBXCHI.kext appears to work well natively. The exception is those laptops with 6-series chipsets. For these laptops you should use a USB2 port and USB2 flash drive. There is no support in the BIOS for booting from the NEC/Renesas ports anyway.

   

- Also copy HPFanReset.efi to EFI/Clover/drivers64UEFI. HPFanReset.efi is available here: https://bitbucket.org/RehabMan/hp-probook-4x30s-fan-reset/downloads

   

- Use the 'createinstallmedia' approach. It works well, and there is little chance for pilot error. This method also gives you an OS X recovery partition.

   

- It is best to use a USB2 stick. USB3 on 6-series ProBook/EliteBook will have issues.

   

- Some laptops will need to use the alternate DropTables as mentioned in the guide. Likely required for Sandy Bridge models with turbo boost enabled CPUs (eg. Core i5-2xxx, Core i7-2xxx, but not Core i3-2xxx).

   

wifi和蓝牙修复：

   

Depends on having compatible hardware. Use DPCIManager->PCI List to find out what you have. Compatible chipsets and the procedures for making them work are covered here: http://www.tonymacx86.com/network/104850-guide-airport-pcie-half-mini-v2.html

   

Note: If the device is not listed in post #1 of the linked WiFi guide, it is not supported. Intel WiFi, RaLink WiFi, and Realtek PCIe WiFi are simply not supported and must be replaced with something compatible.

   

Best choice: BCM94352HMB (or BCM94352Z if your laptop needs NGFF/M.2 2230). Also, the NGFF BCM94350ZAE is a possibility.

   

Note: BCM94352HMB is easy to find and generally is $20-$30. For BCM94352Z, read here: