交叉编译 ARM busybox for Tiny6410

busybox 下载网址：

http://www.busybox.net/source.html

$ git clone git://busybox.net/busybox.git

Initializing cgroup subsys cpu
Linux version 2.6.36-FriendlyARM-g3c85a8a (chenqiang@chenqiang-laptop) (gcc version 4.5.1 (ctng-1.8.1-FA) ) #6 PREEMPT Mon May 6 22:19:00 CST 2013
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: MINI6410
MINI6410: S70 selected
Memory policy: ECC disabled, Data cache writeback
CPU S3C6410 (id 0x36410101)
s3c6410_init_clocks: initialising clocks
S3C24XX Clocks, Copyright 2004 Simtec Electronics
camera: no parent clock specified
s3c6400_setup_clocks: registering clocks
s3c6400_setup_clocks: clkdiv0 = 01043310
s3c6400_setup_clocks: xtal is 12000000
S3C64XX: PLL settings, A=532000000, M=532000000, E=24000000
S3C64XX: HCLK2=266000000, HCLK=133000000, PCLK=66500000
mout_apll: source is fout_apll (1), rate is 532000000
mout_epll: source is epll (1), rate is 24000000
mout_mpll: source is mpll (1), rate is 532000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
usb-bus-host: source is clk_48m (0), rate is 48000000
s3c64xx_clk_doutmpll_get_rate: parent is 532000000
uclk1: source is dout_mpll (1), rate is 66500000
spi-bus: source is mout_epll (0), rate is 24000000
spi-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
irda-bus: source is mout_epll (0), rate is 24000000
camera: no parent clock specified
s3c64xx: 6291456 bytes SDRAM reserved for fimc at 0x5f9f8000
s3c64xx: 8388608 bytes SDRAM reserved for pp at 0x5f1f8000
s3c64xx: 8388608 bytes SDRAM reserved for tv at 0x5e9f8000
s3c64xx: 2097152 bytes SDRAM reserved for jpeg at 0x5e7f8000
s3c64xx: 16777216 bytes SDRAM reserved for pmem at 0x5d7f8000
s3c64xx: 33554432 bytes SDRAM reserved for pmem_gpu1 at 0x5b7f8000
s3c64xx: 8388608 bytes SDRAM reserved for pmem_adsp at 0x5aff8000
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat c07963c8, node_mem_map c084e000
  Normal zone: 512 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 65024 pages, LIFO batch:15
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: root=/dev/ram rdinit=/bin/sh console=ttySAC0,115200 androidboot.console=s3c2410_serial0 lcd=S70
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 169452k/169452k available, 92692k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xff600000 - 0xffe00000   (   8 MB)
    vmalloc : 0xd0800000 - 0xe0000000   ( 248 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc01f9000   (1988 kB)
      .text : 0xc01f9000 - 0xc0738000   (5372 kB)
      .data : 0xc075a000 - 0xc07969e0   ( 243 kB)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
        RCU-based detection of stalled CPUs is disabled.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:246
s3c64xx_init_irq: initialising interrupts
VIC @f4000000: id 0x00041192, vendor 0x41
VIC @f4010000: id 0x00041192, vendor 0x41
High resolution timer: rate = 66500000, HZ = 100
Console: colour dummy device 80x30
console [ttySAC0] enabled
Calibrating delay loop... 530.84 BogoMIPS (lpj=2654208)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
s3c64xx_dma_init: Registering DMA channels
s3c64xx_dma_init1: registering DMA 0 (d0808100)
s3c64xx_dma_init1: registering DMA 1 (d0808120)
s3c64xx_dma_init1: registering DMA 2 (d0808140)
s3c64xx_dma_init1: registering DMA 3 (d0808160)
s3c64xx_dma_init1: registering DMA 4 (d0808180)
s3c64xx_dma_init1: registering DMA 5 (d08081a0)
s3c64xx_dma_init1: registering DMA 6 (d08081c0)
s3c64xx_dma_init1: registering DMA 7 (d08081e0)
PL080: IRQ 73, at d0808000
s3c64xx_dma_init1: registering DMA 8 (d080c100)
s3c64xx_dma_init1: registering DMA 9 (d080c120)
s3c64xx_dma_init1: registering DMA 10 (d080c140)
s3c64xx_dma_init1: registering DMA 11 (d080c160)
s3c64xx_dma_init1: registering DMA 12 (d080c180)
s3c64xx_dma_init1: registering DMA 13 (d080c1a0)
s3c64xx_dma_init1: registering DMA 14 (d080c1c0)
s3c64xx_dma_init1: registering DMA 15 (d080c1e0)
PL080: IRQ 74, at d080c000
S3C6410: Initialising architecture
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c-i2c s3c2440-i2c: slave address 0x10
s3c-i2c s3c2440-i2c: bus frequency set to 377 KHz
s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.23.
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Switching to clocksource clock_source_timer2
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
ashmem: initialized
squashfs: version 4.0 (2009/01/31) Phillip Lougher
yaffs built May  3 2013 22:22:20 Installing.
io scheduler noop registered (default)
io scheduler cfq registered
S3C_LCD clock got enabled :: 133.000 Mhz
LCD TYPE :: Mini6410 will be initialized
Window[0] - FB1: map_video_memory: clear ff600000:00177000
            FB1: map_video_memory: dma=5a200000 cpu=ff600000 size=00177000
Window[0] - FB2: map_video_memory: clear ff6bb800:000bb800
            FB2: map_video_memory: dma=5a2bb800 cpu=ff6bb800 size=000bb800
Console: switching to colour frame buffer device 100x30
fb0: s3cfb frame buffer device
Window[1] - FB1: map_video_memory: clear ff800000:00177000
            FB1: map_video_memory: dma=59c00000 cpu=ff800000 size=00177000
Window[1] - FB2: map_video_memory: clear ff8bb800:000bb800
            FB2: map_video_memory: dma=59cbb800 cpu=ff8bb800 size=000bb800
fb1: s3cfb frame buffer device
backlight       initialized
leds    initialized
pwm     initialized
adc     initialized
s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
s3c6400-uart.3: s3c2410_serial3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10
loop: module loaded
pmem: 1 init
pmem_gpu1: 0 init
pmem_adsp: 0 init
S3C NAND Driver, (c) 2008 Samsung Electronics
MLC nand initialized, 2011 ported by FriendlyARM
S3C NAND Driver is using hardware ECC.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit)
Creating 3 MTD partitions on "NAND 2GiB 3,3V 8-bit":
0x000000000000-0x000000400000 : "Bootloader"
0x000000400000-0x000000c00000 : "Kernel"
0x000000c00000-0x000080000000 : "File System"
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
dm9000 Ethernet Driver, V1.31
eth0: dm9000a at d081e000,d0c00004 IRQ 108 MAC: 08:90:90:90:90:90 (chip)
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 64 td 64
s3c2410-ohci s3c2410-ohci: s3c2410_start_hc:
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000
s3c2410-ohci s3c2410-ohci: created debug files
s3c2410-ohci s3c2410-ohci: OHCI controller state
s3c2410-ohci s3c2410-ohci: OHCI 1.0, NO legacy support registers
s3c2410-ohci s3c2410-ohci: control 0x083 HCFS=operational CBSR=3
s3c2410-ohci s3c2410-ohci: cmdstatus 0x00000 SOC=0
s3c2410-ohci s3c2410-ohci: intrstatus 0x00000004 SF
s3c2410-ohci s3c2410-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
s3c2410-ohci s3c2410-ohci: hcca frame #0005
s3c2410-ohci s3c2410-ohci: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2)
s3c2410-ohci s3c2410-ohci: roothub.b 00000000 PPCM=0000 DR=0000
s3c2410-ohci s3c2410-ohci: roothub.status 00008000 DRWE
s3c2410-ohci s3c2410-ohci: roothub.portstatus [0] 0x00010101 CSC PPS CCS
s3c2410-ohci s3c2410-ohci: roothub.portstatus [1] 0x00000100 PPS
usb usb1: default language 0x0409
usb usb1: udev 1, busnum 1, minor = 0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: S3C24XX OHCI
usb usb1: Manufacturer: Linux 2.6.36-FriendlyARM-g3c85a8a ohci_hcd
usb usb1: SerialNumber: s3c24xx
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0xa006,0x2900,0x0000,ca827ba8,000f)
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: no over-current protection
hub 1-0:1.0: power on to power good time: 4ms
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0xa000,0x0000,0x0000,ca827b58,0004)
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0x2303,0x0008,0x0001,ca827b30,0000)
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0x2303,0x0008,0x0002,ca827b30,0000)
drivers/usb/core/inode.c: creating file '001'
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for aircable
usbcore: registered new interface driver aircable
USB Serial support registered for ark3116
usbcore: registered new interface driver ark3116
ark3116:v0.6:USB ARK3116 serial/IrDA driver
USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
usbcore: registered new interface driver belkin
belkin_sa: v1.3:USB Belkin Serial converter driver
USB Serial support registered for ch341-uart
usbcore: registered new interface driver ch341
USB Serial support registered for cp210x
usbcore: registered new interface driver cp210x
cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
USB Serial support registered for Reiner SCT Cyberjack USB card reader
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0xa300,0x0000,0x0001,ca88fe18,0004)
s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 1-0:1.0: port 1: status 0101 change 0001
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0x2301,0x0010,0x0001,ca88fe48,0000)
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0xa300,0x0000,0x0002,ca88fe18,0004)
usbcore: registered new interface driver cyberjack
cyberjack: v1.01 Matthias Bruestle
cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
USB Serial support registered for DeLorme Earthmate USB
USB Serial support registered for HID->COM RS232 Adapter
USB Serial support registered for Nokia CA-42 V2 Adapter
usbcore: registered new interface driver cypress
cypress_m8: v1.10:Cypress USB to Serial Driver
USB Serial support registered for debug
usbcore: registered new interface driver debug
USB Serial support registered for Digi 2 port USB adapter
USB Serial support registered for Digi 4 port USB adapter
usbcore: registered new interface driver digi_acceleport
digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver
USB Serial support registered for Edgeport 2 port adapter
USB Serial support registered for Edgeport 4 port adapter
USB Serial support registered for Edgeport 8 port adapter
USB Serial support registered for EPiC device
usbcore: registered new interface driver io_edgeport
io_edgeport: v2.7:Edgeport USB Serial Driver
USB Serial support registered for Edgeport TI 1 port adapter
hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0xa300,0x0000,0x0001,ca873e18,0004)
hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0x2303,0x0004,0x0001,ca873db8,0000)
USB Serial support registered for Edgeport TI 2 port adapter
usbcore: registered new interface driver io_ti
io_ti: v0.7mode043006:Edgeport USB Serial Driver
USB Serial support registered for empeg
usbcore: registered new interface driver empeg
empeg: v1.3:USB Empeg Mark I/II Driver
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
USB Serial support registered for funsoft
usbcore: registered new interface driver funsoft
USB Serial support registered for Garmin GPS usb/tty
usbcore: registered new interface driver garmin_gps
garmin_gps: v0.33:garmin gps driver
USB Serial support registered for hp4X
usbcore: registered new interface driver hp4X
hp4x: v1.00:HP4x (48/49) Generic Serial driver
USB Serial support registered for PocketPC PDA
usbcore: registered new interface driver ipaq
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0xa300,0x0000,0x0001,ca873d88,0004)
s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
ipaq: v1.0:USB PocketPC PDA driver
USB Serial support registered for IPWireless converter
usbcore: registered new interface driver ipwtty
ipw: v0.4:IPWireless tty driver
USB Serial support registered for IR Dongle
usbcore: registered new interface driver ir-usb
ir_usb: v0.5:USB IR Dongle driver
USB Serial support registered for iuu_phoenix
usbcore: registered new interface driver iuu_phoenix
iuu_phoenix: v0.12:Infinity USB Unlimited Phoenix driver
USB Serial support registered for Keyspan - (without firmware)
USB Serial support registered for Keyspan 1 port adapter
USB Serial support registered for Keyspan 2 port adapter
USB Serial support registered for Keyspan 4 port adapter
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0x2301,0x0014,0x0001,ca873db8,0000)
usb 1-1: new full speed USB device using s3c2410-ohci and address 2
usbcore: registered new interface driver keyspan
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0x2303,0x0004,0x0001,ca873db8,0000)
keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
USB Serial support registered for Keyspan PDA
USB Serial support registered for Keyspan PDA - (prerenumeration)
USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
usbcore: registered new interface driver keyspan_pda
keyspan_pda: v1.1:USB Keyspan PDA Converter driver
USB Serial support registered for KL5KUSB105D / PalmConnect
usbcore: registered new interface driver kl5kusb105d
kl5kusb105: v0.4:KLSI KL5KUSB105 chipset USB->Serial Converter driver
USB Serial support registered for KOBIL USB smart card terminal
usbcore: registered new interface driver kobil
kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
USB Serial support registered for MCT U232
usbcore: registered new interface driver mct_u232
mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
USB Serial support registered for Moschip 2 port adapter
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0xa300,0x0000,0x0001,ca873d88,0004)
s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
mos7720: 2.1:Moschip USB Serial Driver
usbcore: registered new interface driver moschip7720
USB Serial support registered for Moschip 7840/7820 USB Serial Driver
mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver
usbcore: registered new interface driver mos7840
USB Serial support registered for moto-modem
usbcore: registered new interface driver moto-modem
USB Serial support registered for navman
usbcore: registered new interface driver navman
USB Serial support registered for ZyXEL - omni.net lcd plus usb
usbcore: registered new interface driver omninet
omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
USB Serial support registered for opticon
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0x2301,0x0014,0x0001,ca873db8,0000)
usbcore: registered new interface driver opticon
USB Serial support registered for oti6858
usbcore: registered new interface driver oti6858
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
USB Serial support registered for qcaux
usb 1-1: ep0 maxpacket = 8
usbcore: registered new interface driver qcaux
USB Serial support registered for Qualcomm USB modem
usbcore: registered new interface driver qcserial
safe_serial: v0.1:USB Safe Encapsulated Serial
USB Serial support registered for safe_serial
usb 1-1: default language 0x0409
usbcore: registered new interface driver safe_serial
USB Serial support registered for siemens_mpi
usb 1-1: udev 2, busnum 1, minor = 1
usb 1-1: New USB device found, idVendor=05e3, idProduct=0606
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Hub 2.0
usb 1-1: usb_probe_device
usb 1-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver siemens_mpi
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Driver for Siemens USB/MPI adapter
hub 1-1:1.0: usb_probe_interface
hub 1-1:1.0: usb_probe_interface - got id
hub 1-1:1.0: USB hub found
Version 0.1 09/26/2005 Thomas Hergenhahn@web.de http://libnodave.sf.net
hub 1-1:1.0: 4 ports detected
hub 1-1:1.0: standalone hub
hub 1-1:1.0: individual port power switching
hub 1-1:1.0: individual port over-current protection
hub 1-1:1.0: power on to power good time: 44ms
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
hub 1-1:1.0: local power source is good
hub 1-1:1.0: enabling power on all ports
sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
USB Serial support registered for SPCP8x5
usbcore: registered new interface driver spcp8x5
spcp8x5: v0.10:SPCP8x5 USB to serial adaptor driver
USB Serial support registered for Quatech SSU-100 USB to Serial Driver
usbcore: registered new interface driver ssu100
ssu100: v0.1:Quatech SSU-100 USB to Serial Driver
USB Serial support registered for symbol
drivers/usb/core/inode.c: creating file '002'
usbcore: registered new interface driver symbol
USB Serial support registered for TI USB 3410 1 port adapter
USB Serial support registered for TI USB 5052 2 port adapter
hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0xa300,0x0000,0x0001,ca873e18,0004)
usbcore: registered new interface driver ti_usb_3410_5052
ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
USB Serial support registered for Handspring Visor / Palm OS
USB Serial support registered for Sony Clie 3.5
USB Serial support registered for Sony Clie 5.0
usbcore: registered new interface driver visor
visor: USB HandSpring Visor / Palm OS driver
USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
USB Serial support registered for Connect Tech - WhiteHEAT
usbcore: registered new interface driver whiteheat
whiteheat: v2.0:USB ConnectTech WhiteHEAT driver
USB Serial support registered for vivopay-serial
usbcore: registered new interface driver vivopay-serial
vivopay_serial: v1.0:ViVOpay USB Serial Driver
USB Serial support registered for zio
usbcore: registered new interface driver zio
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
android init
android_probe pdata: c0760c40
android_bind
android_bind_config
android_usb gadget: android_usb ready
hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0xa300,0x0000,0x0002,ca873e18,0004)
s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0x2301,0x0010,0x0002,ca873e48,0000)
hub 1-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0xa300,0x0000,0x0002,ca873e18,0004)
Registered gadget driver 'android_usb'
f_adb init
android_register_function adb
f_mass_storage init
fsg_probe pdev: c0760860, pdata: c0760bc8
android_register_function usb_mass_storage
android_usb gadget: Mass Storage Function, version: 2009/09/11
android_usb gadget: Number of LUNs=1
 lun0: LUN: removable file: (no medium)
adb_bind_config
mice: could not register psaux device, error: -16
mice: PS/2 mouse device common for all mice
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0xa300,0x0000,0x0002,ca873e18,0004)
s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0x2301,0x0010,0x0002,ca873e48,0000)
input: gpio-keys as /devices/platform/gpio-keys/input/input0
S3C Touchscreen driver, (c) 2010 FriendlyARM
touchscreen got loaded successfully : 12 bits
touchscreen-1wire       initialized
backlight-1wire initialized
input: TouchScreen Pipe as /devices/virtual/input/input1
one_wire_status: 4
ts-if   initialized
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0xa300,0x0000,0x0002,ca873e18,0004)
using rtc device, s3c, for alarms
s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
Linux video capture interface: v2.00
usbcore: registered new interface driver usbvision
USBVision USB Video Device Driver for Linux : 0.9.10
usbcore: registered new interface driver pvrusb2
pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
pvrusb2: Debug mask is 31 (0x1f)
usbcore: registered new interface driver zr364xx
zr364xx: Zoran 364xx
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0xa300,0x0000,0x0002,ca873e18,0004)
usbcore: registered new interface driver stkwebcam
gspca: main v2.10.0 registered
usbcore: registered new interface driver hdpvr
one_wire_status: 4
usbcore: registered new interface driver s2255
s3c-fimc: controller 0 registered successfully
s3c-fimc: controller 1 registered successfully
FIMC Driver, 2010 ported by FriendlyARM http://www.arm9.net
ov965x: probe
s3c-fimc: i2c transfer error
s3c-fimc: i2c transfer error
s3c-fimc: i2c transfer error
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0xa300,0x0000,0x0002,ca873e18,0004)
s3c-fimc: i2c transfer error
s3c-fimc: ov965x: Product ID fb:fb Manufacturer ID fb:fb
parent clock for camera: 266.000 MHz, divisor: 11
one_wire_status: 2
[CAM]RESET CAM.
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(ca877800,0xa300,0x0000,0x0002,ca873e18,0004)
hub 1-0:1.0: debounce: port 2: total 125ms stable 100ms status 0x100
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
S3C PostProcessor Driver v3.12, (c) 2009 Samsung Electronics
S3C6410 TV encoder Driver, (c) 2008 Samsung Electronics
 S3C6410 TV encoder Driver init OK.
S3C6410 TV scaler Driver, (c) 2008 Samsung Electronics
 S3C6410 TV scaler Driver init OK.
S3C JPEG Driver, (c) 2007 Samsung Electronics
s3c-g2d: Driver loaded succesfully
s3c-g2d: Module initialized.
s3c_g3d: clock enabled
s3c-g3d: detected FIMG-3DSE version 1.5.0
s3c-g3d: Driver loaded succesfully
s3c-g3d: Module initialized.
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
one_wire_status: 4
Bluetooth: HCILL protocol initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (24000000 Hz)
one_wire_status: 2
Registered led device: mmc0::
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 2: mmc_bus (24000000 Hz)
one_wire_status: 4
s3c6400_setup_sdhci_cfg_card: CTRL 2=c0004120, 3=80808080
Registered led device: mmc1::
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
asoc: AC97 HiFi <-> s3c-ac97 mapping ok
s3c6400_setup_sdhci_cfg_card: CTRL 2=c0004100, 3=00008080
mmc0: new high speed SD card at address b368
mmcblk0: mmc0:b368 SMISD 1.85 GiB
 mmcblk0: p1
s3c6400_setup_sdhci_cfg_card: CTRL 2=c0004120, 3=80808080
ALSA device list:
  #0: MINI6410 (WM9713)
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
one_wire_status: 2
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
s3c-rtc s3c64xx-rtc: setting system clock to 2000-02-01 08:04:58 UTC (949392298)
Freeing init memory: 1988K
qc test log V2: Hello Tiny6410~~
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   1048576 bytes (1024 KiB)
UBI: logical eraseblock size:    1032192 bytes
UBI: smallest flash I/O unit:    8192
UBI: VID header offset:          8192 (aligned 8192)
UBI: data offset:                16384
one_wire_status: 5
UBI: max. sequence number:       70
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "File System"
UBI: MTD device size:            2036 MiB
UBI: number of good PEBs:        2033
UBI: number of bad PEBs:         3
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
one_wire_status: 2
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 2033
UBI: number of PEBs reserved for bad PEB handling: 20
UBI: max/mean erase counter: 2/0
UBI: image sequence number:  1378164781
one_wire_status: 2
UBI: background thread "ubi_bgt0d" started, PID 883
UBI error: ubi_create_volume: cannot create volume 1, error -28

$ mount -t proc proc /proc

$ mount -t sysfs sys /sys