install NVIDIA-driver from run-file

最新推荐文章于 2024-11-07 15:10:32 发布

NikitaC

最新推荐文章于 2024-11-07 15:10:32 发布

阅读量310

点赞数

CC 4.0 BY-SA版权

文章标签：开发语言

本文链接：https://blog.youkuaiyun.com/chenpeizhi/article/details/133606717

本文详细指导如何在AWSEC2的p2.x实例上通过NVIDIArunfile下载并安装最新版本的NVIDIA驱动，包括停止X服务器、执行安装脚本、验证驱动安装等步骤。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

https://www.nvidia.com/download/index.aspx

check the version of driver you need, mine is px.2

To install the NVIDIA graphics driver from the NVIDIA run file on an AWS EC2 instance (e.g., p2.x instance), you can follow these steps:

Connect to Your EC2 Instance:
Use SSH to connect to your EC2 instance. Replace your-instance-ip with the actual public IP address or DNS name of your instance and use the appropriate SSH key file.
```
ssh -i /path/to/your/keyfile.pem ec2-user@your-instance-ip
```
Download the NVIDIA Driver:
You can download the NVIDIA driver run file from the NVIDIA website or from another trusted source. For example, to download version 460.106.00, you can use wget:
```
wget http://us.download.nvidia.com/tesla/460.106.00/NVIDIA-Linux-x86_64-460.106.00.run
```
Be sure to check the NVIDIA website for the latest driver version and update the URL accordingly.

Make the Downloaded File Executable:

chmod +x NVIDIA-Linux-x86_64-460.106.00.run

Stop the X Server:
Before installing the driver, it’s a good practice to stop the X server to prevent conflicts. You can do this by running:
```
sudo systemctl stop display-manager
```
The command may vary depending on your Linux distribution and display manager.
Run the NVIDIA Driver Installer:
```
sudo ./NVIDIA-Linux-x86_64-460.106.00.run
```
Follow the on-screen prompts to install the driver. You may need to accept the NVIDIA Software License Agreement and choose various installation options.
Reboot Your EC2 Instance:
```
sudo reboot
```
Rebooting the instance will load the new NVIDIA driver.
Verify the Driver Installation:

After your instance has rebooted, you can verify that the NVIDIA driver is installed and working correctly by running:
```
nvidia-smi
```
This command should display information about your GPU.

Please note that the process of installing the NVIDIA driver may vary slightly depending on the specific Linux distribution and instance type you are using. Always check the NVIDIA documentation and AWS documentation for any instance-specific considerations.