本文记录了使用捐赠的10-Gig Myricom NICs在新组装的机器上安装并测试HAProxy的过程。测试结果达到了9.897 Gbps的带宽和35128 hits/s的性能指标，这可能是开源负载均衡器迄今达到的最高比特率。值得注意的是，大多数商业产品因硬件设计限制通常只能达到4Gbps。
News, March 30th, 2008
I finally assembled my new machines and installed the donated 10-Gig Myricom NICs. I ran a few benchmarks. Result: new bandwidth records set for HAPoxy: 9.897 Gbps and 35128 hits/s! It's possibly the highest bitrate achieved to date with an opensource load-balancer! BTW, even most commercial ones are commonly limited to 4 Gbps by hardware design. What's a bit frustrating for a precision-tweaker like me is that those NICs work out-of-the box on dirt cheap hardware, there's almost no joy passing beyond the first 4 Gbps :-)
作者Willy TARREAU是linux 内核的2.4主要维护者之一。
具体的请看：
http://haproxy.1wt.eu/10g.html
I finally assembled my new machines and installed the donated 10-Gig Myricom NICs. I ran a few benchmarks. Result: new bandwidth records set for HAPoxy: 9.897 Gbps and 35128 hits/s! It's possibly the highest bitrate achieved to date with an opensource load-balancer! BTW, even most commercial ones are commonly limited to 4 Gbps by hardware design. What's a bit frustrating for a precision-tweaker like me is that those NICs work out-of-the box on dirt cheap hardware, there's almost no joy passing beyond the first 4 Gbps :-)
作者Willy TARREAU是linux 内核的2.4主要维护者之一。
具体的请看：
http://haproxy.1wt.eu/10g.html
扫一扫
871
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
