Process Order API - How To Scripts

本文档汇集了ProcessOrder API的各种“如何做”脚本,包括订单创建、更新、取消等操作,并覆盖从Oracle Order Management 11.5到12.2.3版本。提供了详细的脚本说明及应用示例。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

In this Document

 Purpose
 Questions and Answers
 References

APPLIES TO:

Oracle Order Management - Version 11.5 to 12.2.3 [Release 11.5 to 12.2]
Information in this document applies to any platform.
***Checked for relevance on 08-Sep-2014*** 

PURPOSE

This document is a compilation of Process Order API 'How To' Scripts

QUESTIONS AND ANSWERS

Note Number
Script Description
Document 364316.1How does one import Credit Card Payments using Process Order API ?
Document 427947.1How does one process orders from different operating units using Process Order API ?
Document 470741.1How Does One Book An Order Using Process Order API ?
Document 745369.1How Does One Update Order Header Details Using Process Order API For R12 ?
Document 746783.1Script To Create An Order With One Line
Document 746787.1Process Order API In Order Management
Document 746796.1Script To Add A New Line To An Existing Order
Document 746797.1Script To Cancel An Existing Order
Document 746798.1Script To Cancel An Existing Order Line
Document 746802.1Script To Update An Existing Order Line
Document 746803.1Script To Reserve an Order Line
Document 746804.1Script To Unreserve An Order Line
Document 746808.1Script To Split An Order Line
Document 746809.1Script To Delete An Order
Document 746810.1Script To Delete An Order Line
Document 746811.1Script To Apply Hold in Sales Order
Document 746812.1Script To Release Hold In A Sales Order
Document 755135.1How does one update Unit Price using Process Order API?
Document 811264.1How Does One Book An Order Using OE_INBOUND_INT.PROCESS_ORDER() ?
Document 869085.1Process Order API In Order Management - R12 Updates
Document 1128445.1Need Script To Apply Hold using Process Order API in R12 ?
Document 1907954.1Seeded API Not Generating Trxn_Extension_id In Oe_payments Table For ACH Payment Type Information

 

Still Have Questions? 
To discuss this information further with Oracle experts and industry peers, we encourage you to review, join or start a discussion in the My Oracle Support Order Management EBS Community


Let us know your feedback! 
We hope you find this information useful. Our desire is to provide the right information when you need it. Please let us know how we are doing. To provide feedback on this note: 
1. Select the "Rate this document" link. Depending on how you are viewing the note, you will find the link on the: 
  a) bottom left when viewing the note in a separate window. 
  b) upper right when viewing the note in the My Oracle Support window. 
2. In the resulting pop-up box, enter your comments and ratings for the document. 
3. Select Send Rating.

REFERENCES

NOTE:1396053.1  - How to apply a HOLD at Line Level using an API ?
NOTE:1066731.1  - Is There Any Documentation for the OE_HOLDS_PUB API?
### TDA4VM U-Boot Configuration and Usage Tutorial For the Texas Instruments (TI) TDA4VM platform, configuring and using U-Boot involves several key steps to ensure proper initialization of the system before loading an operating system or application. The process starts with setting up the hardware correctly. Configuring SW8 and SW9 dip switches into SD card boot mode is essential as part of initial setup procedures[^1]. Once these settings are confirmed, inserting a properly prepared SD card that contains the necessary bootloader files including U-Boot will allow the board to start from this medium when powered on. After powering up the device successfully through the described method, accessing the command line interface typically requires logging in as `root` without needing additional credentials during development phases[^2]. To delve deeper specifically into U-Boot: #### Setting Up Environment Variables Environment variables within U-Boot play a critical role in defining how the bootloader operates. These can be set via commands directly at the U-Boot prompt after gaining access post-boot sequence completion. Commonly adjusted parameters include those specifying memory addresses where kernel images should reside once loaded along with other important configurations like IP address assignment methods for network operations if applicable. ```bash setenv ipaddr 192.168.0.10 setenv serverip 192.168.0.1 saveenv ``` These examples demonstrate basic networking environment variable assignments which might prove useful depending upon intended use cases involving remote file transfers over Ethernet connections between host machines and target boards running U-Boot. #### Loading Kernel Image Using TFTP Protocol Transferring binary payloads such as Linux kernels onto RAM buffers inside embedded systems often leverages protocols supported by U-Boot. One common approach employs Trivial File Transfer Protocol (TFTP), facilitating straightforward downloads initiated either manually or scripted automatically based on predefined paths stored among previously mentioned environmental properties. ```bash tftpboot ${loadaddr} /path/to/kernel.img go ${loadaddr} ``` This pair of instructions first fetches then executes code located remotely relative to what has been specified under `${loadaddr}` placeholder symbolizing destination location within volatile storage space allocated temporarily while executing tasks outside persistent filesystem contexts. #### Customizing Boot Arguments Passed To OS Kernels Tailoring arguments passed down ultimately influences behavior exhibited throughout subsequent stages following successful invocation past early-stage firmware layers managed hereunder control structures implemented natively alongside core functionalities provided out-of-the-box but extendable according to project requirements. ```bash setenv bootargs "console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw" bootm ${loadaddr} ``` Above snippet illustrates appending console output redirection together with designating active partition serving as root filesystem mount point besides read-write permissions flagging – all crucial aspects affecting overall performance characteristics observable later downstream processes contingent upon accurate parameterization applied upstream accordingly prior launch sequences commence execution flow transition points bridging low-level abstractions towards higher-order constructs embodied fully formed runtime environments ready hosting applications atop solid foundations laid meticulously beforehand ensuring stability reliability efficiency across diverse scenarios encountered field deployments real-world conditions varying widely case-by-case basis. --related questions-- 1. How does one customize U-Boot's default environment variables? 2. What tools are available for debugging issues related to U-Boot on TI platforms? 3. Can you provide guidance on integrating custom scripts into U-Boot for automated testing purposes? 4. Are there any specific considerations when updating U-Boot versions on TDA4VM devices?
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值