郭景霞拼图

最新推荐文章于 2025-08-18 09:11:43 发布

原创最新推荐文章于 2025-08-18 09:11:43 发布 · 269 阅读

0 ·

CC 4.0 BY-SA版权

博客内容提及为郭景霞编写了拼图片小脚本，虽未详细说明脚本具体内容，但核心围绕此脚本展开，体现了信息技术中脚本编写的相关内容。

以下是为郭景霞写的拼图片小脚本

# -*- coding: utf-8 -*-
import sys
reload(sys)
sys.setdefaultencoding('utf-8')
import os
import math
from PIL import Image,ImageDraw,ImageFont

if __name__ == '__main__' :
    path = 'D:/Recombination/inputImg/'
    pall,xyRatio = [], []
    for i in os.listdir(path):
        im=Image.open(path+i)
        (x,y) = im.size
        pall.append(im.size)
        xyRatio.append(x/(1.00000*y))
    if abs(1.*max(xyRatio)/(1.*min(xyRatio))-1)> 0.05:
        print  '横竖比差异超过5%，影响整体拼图效果，本次退出。请重新调整尺寸'
        sys.exit()
    HorW=(raw_input("请输入你的排版方式，H竖向，W横向 H or W ？，然后回车\n")).lower()
    #perRowCount 为每行多少字
    perRowCount=int(raw_input("请输入该方向需要多少张图，然后回车\n"))
    #fileCount为多少文件数
    fileCount= len(pall)

    #print perRowCount,fileCount,int(math.ceil(fileCount*1.00/int(perRowCount)))
    xlist,ylist = [],[]
    for xsize , ysize in pall :
        ylist.append(ysize)
        xlist.append(xsize)
    #ymin ,xmin 文件中高宽的最小值
    ymin ,xmin = min(ylist),min(xlist)

    if HorW == 'h':
        times = 0
        #rowCount为多少行数
        rowCount = int(math.ceil(fileCount*1.0000/perRowCount))
        #设置生成的新图片尺寸大小
        newImg = Image.new("RGBA",(xmin*rowCount,ymin*perRowCount),(217,214,203))
        rowCount_times = rowCount
        for i in os.listdir(path):
            print i ,times
            imgFrom = Image.open(path + i)
            imgFrom = imgFrom.resize((xmin,ymin))
            if((times%perRowCount == 0) ):
                rowCount_times = rowCount_times - 1
            y1 = ymin *(1+ times%perRowCount)
            y0 = ymin *(0+ times%perRowCount)
            x1 = (rowCount_times+1) * xmin
            x0 = (rowCount_times+0) * xmin
            newImg.paste(imgFrom.crop((0,0,xmin,ymin)),(x0,y0,x1,y1))
            times += 1
    if HorW == 'w':
        #colstep 第x列，
        colstep = perRowCount
        times = 0
        #rowCount为多少行数
        rowCount = int(math.ceil(fileCount*1.0000/perRowCount))
        #设置生成的新图片尺寸大小
        newImg = Image.new("RGBA",(xmin*perRowCount ,ymin*rowCount),(217,214,203))
        for i in os.listdir(path):
            print i
            imgFrom = Image.open(path + i)
            imgFrom = imgFrom.resize((xmin,ymin))
            colstep = times/perRowCount
            y1 = (colstep+1) * ymin
            x1 = (perRowCount -times%perRowCount) * xmin
            y0 = (colstep+0) * ymin
            x0 = (perRowCount -times%perRowCount-1) * xmin
            #newImg.paste(imgFrom.crop((0,0,xmin,ymin)),(0,0,xmin,ymin))
            print x0,y0,x1,y1
            newImg.paste(imgFrom.crop((0,0,xmin,ymin)),(x0,y0,x1,y1))
            times += 1

    newImg.show()
    newImg.save("D:/Recombination/ImgnewImg.png","PNG")