墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
300+累计阅读
346平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
虫师的guest项目，从django1.10 升级到2.1后，需做以下改动：
models中，外键加on_delete参数
event = models.ForeignKey(Event, on_delete=models.CASCADE)
在应用的目录下的urls.py的urlpatterns前面添加app_name='[app_name]'
app_name = '[sign]'
urlpatterns = [
MIDDLEWARE_CLASSES改成MIDDLEWARE
注释掉#'django.contrib.auth.middleware.SessionAuthenticationMiddleware',
OpenFOAM-v2006重叠网格挖洞问题实战：如何手动修复overset代码中的边缘识别缺陷
本文深入探讨了OpenFOAM-v2006中重叠网格挖洞问题的实战解决方案，重点修复overset代码中的边缘识别缺陷。通过逆向工程解析挖洞决策机制，设计最小侵入式的函数override方案，并建立多级验证体系，有效解决了网格挖洞区域覆盖不全的问题，提升了计算流体动力学模拟的准确性和可靠性。
虫师某本web接口开发及自动化（基于Python）学习总结
废话不多说，直接给总结。1、安装python后，内置pip库的问题，因为我的安装包‘python-3.6.3-amd64.exe’里面pip是最新的，但死活也用不了，更新也更新不了，因为是最新的，最后找到办法，强制重新安装到最新：python -m pip install --upgrade --force-reinstall pip 2、熟练使用python2后，安装python3是否共存的问题...
无监督低照度增强实战：用ZeroDCE和SCI拯救你的夜间照片（附PyTorch代码）
本文深入探讨了无监督低照度图像增强技术，重点解析了ZeroDCE和SCI两大代表性模型的核心原理与实战应用。通过对比分析两者的技术路径、网络结构及性能特点，并附上详细的PyTorch代码实现，旨在帮助读者掌握无需配对数据即可有效提升夜间照片画质的深度学习解决方案。
django由1.11版本升级到3.2版本的2个坑
这里先介绍第一个坑：
MATLAB实战：蓝牙GFSK调制解调全流程解析（附误码率优化技巧）
本文深入解析了蓝牙GFSK调制解调在MATLAB中的全流程实现，包括高斯滤波器设计、调制解调技术及误码率优化技巧。通过实战案例和代码示例，帮助工程师提升蓝牙通信系统的性能表现，特别是在降低误码率方面的有效方法。
《中国图书馆图书分类法》(第五版)详表(中图分类号查询表)
中文法分类
Django基础(40): 如何正确升级Django版本
Django的版本更新比较频繁，基本上一年至少升级一次。那么如何升级项目的Django版本呢? 一个简单解决方法是使用pip升级，如下所示。如果你不指定Django版本号, 那么pip将...
【cocos2dx面试题干货】--2021年最新cocos2dx面试干货（引擎篇）
【cocos2dx面试题干货】--2020年度最新cocos2dx面试干货（引擎篇 ） 大家好，我是Lampard~~ 经过春招一番艰苦奋战之后，我终于是进入了心仪的公司。 今天给大家分享一下我在之前精心准备的一套面试知识。 由于我面试的岗位是cocos2dx的开发岗，今天就先给大家分享一下引擎方面的知识。 本人亲测80%的引擎相关题目都...
django1.8.11升级到2.2.6
django1.8.11升级到2.2.6 原来的依赖包： Django==1.8.11 pymysql==0.6.7 MarkupSafe==0.23 Mako==1.0.4 httplib2==0.9.1 suds==0.4 celery==3.1.18 django-celery==3.2.1 supervisor==3.3.3 requests==2.9.1 django-rest-swa...
YOLOV5 自动刷图脚本实战（十五）之如何找到正确的门
DXF是一个2D游戏，我们所看到的人物移动，其实是后面的背景在移动，我们所看到的画面，不过是一个完整背景中的一个镜头视角而已想要正确找到门的坐标，我们需要对不同的地图中的每个房间做一些配置信息。
网工运维掌握OpenClaw这7大必备技能，自动化运维效率直接起飞
OpenClaw的核心就是它的技能系统。通过官方技能市场（clawhub.ai），你只需一条命令就能安装扩展，让AI代理变成你的“运维副手”。今天我就结合网工运维的真实痛点，精选7项最热门、最实用的OpenClaw技能（基于ClawHub下载量和实际测试），手把手教你安装、使用和进阶玩法。这些技能不是玩具，而是能直接提升运维效率10倍以上的生产力工具！安装后，你的OpenClaw代理就能自动处理Zabbix告警、总结syslog日志、更新Obsidian网络拓扑笔记、甚至通过n8n触发自动修复脚本。
【django升级】django从2.2.6版本升级到3.2.25
因为漏洞问题，客户要求把django从2.2.6版本升级到3.2.25版本，在此记录此次升级遇到的问题。
文档：亲测可用解决vnc灰屏，黑屏，鼠标大黑叉情况
主要解决vnc-viewer灰屏，黑屏，鼠标大黑叉等现象，详细见文档。
Django项目升级到2.2后报错的解决过程
用图片箭头标注的方式，详细解答了把Django项目升级到2.2后，项目中各个地方需要改动的代码，及注意事项
RU DOS版、EFI版32bit/64bit BIOS常用工具
DOS版、EFI版的RU工具，可用来查看IO、MEM、PCI、SMBIOS等资源。亲测在EFI SHELL下可用。
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
Django项目安装报错AttributeError: module ‘collections‘ has no attribute ‘Iterator‘
AttributeError: module 'collections' has no attribute 'Iterator'，这个保存问题是因为Django的版本和python的版本不匹配导致的。升级完，既可以正常创建项目啦。
最新的sdio 4.0 spec 协议标准 带书签 高清完整PDF版
Part-E1-SDIO-Specification-Ver4.00-Final-120220.pdf：最新的sdio 4.0 spec 协议标准 带书签 高清完整PDF版，包括SDIO 接口的外设，SDIO 接口官方协议等。
python怎么升级django_升级python django项目1.3到1.5
currently i have python project using django version 1.3 running on mountain lion OS and now i want to upgrade it to django 1.5. But when i put it and try to do python manage.py runserver i get an err...
如何解决在创建Django应用时出现ModuleNotFoundError: No module named ‘distutils‘报错情况
需要注意的是，如果你使用的是虚拟环境，还要先确保虚拟环境已经启用，我在创建此虚拟环境时遇到与另一个虚拟环境包冲突的情况，解决办法是把另外一个虚拟环境更名即可。此时Django项目就成功建立了，这个办法可以解决使用鼠标创建Django项目时总是报错，只创建虚拟环境而无法成功创建Django项目的问题。原文链接：https://blog.youkuaiyun.com/qq_52543294/article/details/140778517。此报错说是缺少distutils模块，实则是pip出了问题。
python3.7+django3.1.4+mysql5.7环境搭建
https://www.wolfcode.com.cn/info/95/参考 >> yum update 但是当yum update的时候出现上面这个错误，这时候就要去修改下ONBOOT 改成yes位置在 >/>vi/etc/sysconfig/network-scripts/ifcfg-enxxxx 具体名可以用tab键选中 改成yes后重启虚拟机 登录后可以用 ping baidu.com 看看网络是否正常 Minimal 版本的 执...
Unable to create the django_migrations table ((1064, “You have an error in your SQL syntax； check
在使用Django进行项目构建时，执行迁移过程中报错 原因 Django2.1不再支持MySQL5.5，必须5.6版本以上 解决方式 Django降级 pip install Django==2.0.0 -i https://pypi.douban.com/simple mysql升级
python怎么升级django,升级python django项目1.3到1.5
currently i have python project using django version 1.3 running on mountain lion OS and now i want to upgrade it to django 1.5. But when i put it and try to do python manage.py runserver i get an err...
centos7安装mysqlclient踩坑记录
centos7安装mysqlclient踩坑记录 服务器环境为centos7 使用Django3.1部署一个小项目 安装mysqlclient的过程中报错 [root@guest download]# pip3.9 install mysqlclient Collecting mysqlclient Using cached mysqlclient-2.0.2.tar.gz (88 kB) Using legacy 'setup.py install' for mysqlclient, since pa
Django 创建第一个web项目
Python运维开发
Django系利问题解决
问题：python django-amdin startproject mysite #it's ok cd mysite python manage.py migrate #error报错代码：Traceback (most recent call last): File "manage.py", line 17, in <module> "Couldn't import Django
django3+mysql8
1、python manage.py makemigrations报错， 原因和解决方法：https://www.jianshu.com/p/e6e6293af2dc 主要就是mysql8.0的问题。 目前最新的mysql8.0对用户密码的加密方式为caching_sha2_password, django暂时还不支持这种新增的加密方式。只需要将用户加密方式改为老的加密方式即可。 1、打开Mysqlsh 2、连接mysql：\connect root@127.0.0.1:3306 输入密码 n 3
python处理报错_Python 入门级报错处理
问题1：Missing parentheses in call to 'print'原因:因为Python2.X和Python3.X不兼容。我安装的是Python3.X，但是我试图运行的却是Python2.X 的代码。所以上面的语法在python3中是错误的。在python3中，你需要将print后面的语句加括号，正确的写法：print ("hello world")问题2：创建项目报错，djan...
Django-django.core.exceptions.ImproperlyConfigured: SQLite 3.9.0 or later is required (found 3.7.17)
运行Django报错，原因是因为SQLite版本过低，需要升级 下载源码包：wget https://www.sqlite.org/2021/sqlite-autoconf-3350500.tar.gz（这里上官网https://www.sqlite.org自己找一下） 解压：tar -zxvf sqlite-autoconf-3350500.tar.gz 进入到目录：cd sqlite-autoconf-3350500 初始化并编译安装： ./configure --prefix=/usr/..
Django安装入门：从虚拟环境到跑通测试服务器的完整指南
在Python Web开发中，依赖管理与环境隔离是项目落地的首要环节。虚拟环境通过创建独立的Python运行空间，避免不同项目间的包版本冲突，是保证Django等框架稳定运行的基石。pip作为Python官方包管理器，承担着安装、升级与验证第三方库的核心职责。理解这些基础概念后，开发者才能顺畅地完成Django的安装与项目初始化。Django作为流行的Web框架，内置ORM、Admin后台与测试工具，其项目结构涉及manage.py、settings.py、urls.py等关键文件。通过创建最小Django
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
433
扫一扫
