The difference between Failure and Success

最新推荐文章于 2022-04-01 16:56:52 发布
转载 最新推荐文章于 2022-04-01 16:56:52 发布 · 6.8k 阅读 · 0

本篇引用了本杰明·富兰克林的话强调了成功与失败之间的细微差别：几乎正确与完全正确的不同。成功往往取决于是否能在关键时刻做到尽善尽美。

The difference between failure and sucess is the difference between doing something almost right and doing something right.

--Benjamin Frnaklin

bright60
关注
The AI Journey: A Beginner’s Guide to Artificial Intelligence
AI天才研究院
10-11 921
作者：禅与计算机程序设计艺术 Artificial Intelligence (AI) is the field of computer science that aims to create intelligent machines that can learn, think like humans, make decisions, and interact with other systems. It has applications in fields such as robotics, image
RELATIONSHIP OF PSYCHOLOGICAL CAPITAL AND EMPLOYABILITY IN LIAOCHENG UNIVERSITY IN SHANDONG PROVINCE
qq_38086325的博客
11-03 4378
RELATIONSHIP OF PSYCHOLOGICAL CAPITAL AND EMPLOYABILITY IN LIAOCHENG UNIVERSITY IN SHANDONG PROVINCE A Doctoral Dissertation Presented to the Faculty of the College of Education Graduate Studies De La...
the different between crash recovery and media recovery
fufeihappy的专栏
07-31 558
The crash recovery process is a special form of recovery, which happens the first time an Oracle database instance is started after a crash (or SHUTDOWN ABORT). In crash recovery, the goal is to bri
【Verilog】the difference between 按位与 and 逻辑与
weixin_43699738的博客
07-21 1241
逻辑与 逻辑与的结果是1位数 0或1或x A = 4’b1010 B = 4’b1111 A && B = 1 先将多位数变为一位数（操作数每一位都是0，则逻辑值为0，若操作数中有以，则逻辑值为1），再对两个一位数进行与运算 按位与 逻辑与的结果与操作数位数相同 A = 4’b1010 B = 4’b1111 A & B = 1010 每一位对应做与运算，即为所求 ...
the difference between…
GAMELOFT9----纸上得来终觉浅，绝知此事要躬行
03-10 923
起因在于：重启服务器后有时候服务不会启动，而有时候又可以自动运行，唯一差别在于重启命令用的是reboot还是init 6. 后查了相关资料，竟然大有玄机： 对这两个操作使用man命令看到的内容如下： init 6 Stop the operating system and reboot to the state defined by the initdefault entry
The difference between this and $(this) in Jquery
马金波
05-28 182
Content$()this$(this)Reference $() $() , It’s jquery selectors. The selector allows you to manipulate groups of HTML elements or individual elements. In HTML DOM terminology: The selector allows you t...
What is the difference between inference and learning?
pandamax的博客
04-09 414
What-is-the-difference-between-inference-and-learning?
The Dfferents between Redirect and Forward-锻炼英文水平
weixin_30593443的博客
10-16 100
Maybe they are same on the surface. I want to tell you something about them. First , forward cat go anywhere in this web application;Redirect can go to any URL, including inside an outside of ...
Difference between enabled and userInteractionEnabled properties
迎着清晨的阳光，踏上梦想的旅程
07-08 832
I read through the documentation, and here are my findings. UIButton inherits from UIControl the boolean property enabled A Boolean value that determines whether the receiver is enabled. Specif
TED：Grit: The power of passion and perseverance（Angela Lee Duckworth）
当路danglu0010
04-01 4855
TED：Grit: The power of passion and perseverance
翻译如下文档 Add Advertising Command ======================= Command Code: 0x003e Controller Index: <controller id> Command Parameters: Instance (1 Octet) Flags (4 Octets) Duration (2 Octets) Timeout (2 Octets) Adv_Data_Len (1 Octet) Scan_Rsp_len (1 Octet) Adv_Data (0-255 Octets) Scan_Rsp (0-255 Octets) Return Parameters: Instance (1 Octet) This command is used to configure an advertising instance that can be used to switch a Bluetooth Low Energy controller into advertising mode. Added advertising information with this command will not be visible immediately if advertising is enabled via the Set Advertising command. The usage of the Set Advertising command takes precedence over this command. Instance information is stored and will be advertised once advertising via Set Advertising has been disabled. The Instance identifier is a value between 1 and the number of supported instances. The value 0 is reserved. With the Flags value the type of advertising is controlled and the following flags are defined: 0 Switch into Connectable mode 1 Advertise as Discoverable 2 Advertise as Limited Discoverable 3 Add Flags field to Adv_Data 4 Add TX Power field to Adv_Data 5 Add Appearance field to Scan_Rsp 6 Add Local Name in Scan_Rsp When the connectable flag is set, then the controller will use undirected connectable advertising. The value of the connectable setting can be overwritten this way. This is useful to switch a controller into connectable mode only for LE operation. This is similar to the mode 0x02 from the Set Advertising command. When the connectable flag is not set, then the controller will use advertising based on the connectable setting. When using non-connectable or scannable advertising, the controller will be programmed with a non-resolvable random address. When the system is connectable, then the identity address or resolvable private address will be used. Using the connectable flag is useful for peripheral mode support where BR/EDR (and/or LE) is controlled by Add Device. This allows making the peripheral connectable without having to interfere with the global connectable setting. If Scan_Rsp_Len is zero and connectable flag is not set and the global connectable setting is off, then non-connectable advertising is used. If Scan_Rsp_Len is larger than zero and connectable flag is not set and the global advertising is off, then scannable advertising is used. This small difference is supported to provide less air traffic for devices implementing broadcaster role. The Duration parameter configures the length of an Instance. The value is in seconds. A value of 0 indicates a default value is chosen for the Duration. The default is 2 seconds. If only one advertising Instance has been added, then the Duration value will be ignored. It only applies for the case where multiple Instances are configured. In that case every Instance will be available for the Duration time and after that it switches to the next one. This is a simple round-robin based approach. The Timeout parameter configures the life-time of an Instance. In case the value 0 is used it indicates no expiration time. If a timeout value is provided, then the advertising Instance will be automatically removed when the timeout passes. The value for the timeout is in seconds. Powering down a controller will invalidate all advertising Instances and it is not possible to add a new Instance with a timeout when the controller is powered down. When a Timeout is provided, then the Duration subtracts from the actual Timeout value of that Instance. For example an Instance with Timeout of 5 and Duration of 2 will be scheduled exactly 3 times, twice with 2 seconds and once with one second. Other Instances have no influence on the Timeout. Re-adding an already existing instance (i.e. issuing the Add Advertising command with an Instance identifier of an existing instance) will update that instance's configuration. An instance being added or changed while another instance is being advertised will not be visible immediately but only when the new/changed instance is being scheduled by the round robin advertising algorithm. Changes to an instance that is currently being advertised will cancel that instance and switch to the next instance. The changes will be visible the next time the instance is scheduled for advertising. In case a single instance is active, this means that changes will be visible right away. A pre-requisite is that LE is already enabled, otherwise this command will return a "rejected" response. This command can be used when the controller is not powered and all settings will be programmed once powered. This command generates a Command Complete event on success or a Command Status event on failure. Possible errors: Failed Rejected Not Supported Invalid Parameters Invalid Index
11-28
我们正在翻译一个关于蓝牙低功耗（BLE）广告命令的技术文档。需要保持专业术语准确性和格式美观。 重点注意： 1. 命令结构采用分层缩进展示参数 2. 技术术语统一（如"advertising"译为"广播"） ...
The Differences Between Successful People and Unsuccessful People
热门推荐
03-20 6万+
A few weeks ago I received a postcard in the mail from the CEO of Petra Coach, the creator of Align Software and a fellow member of Entrepreneurs Organization. I've never met him, but Andy Bailey an
the difference between OTHER THAN and RATHER THAN
Mr.Daozhi的博客
09-11 398
other than' implies two or more choices that are equally important or that you feel neutral about. Let's say you could either go fishing or go swimming, and you don't have a preference: Other than goi...
The H.264 Advanced Video Compression Standard(second edtion) Chapter 1 学习摘要
04-14 1280
Chapter 1  Introduction 1.1 a change of scene Video compression or video encoding is the process of reducing the amount of data required to represent a digital video signal, prior to transmission
基于YOLO的摩托车头盔检测.zip
01-07
基于YOLO的摩托车头盔检测.zip
基于LOS算法+反步控制的水下航行器AUVUUV三维路径跟踪控制研究（Matlab代码实现）
最新发布
01-07
基于LOS算法+反步控制的水下航行器AUVUUV三维路径跟踪控制研究（Matlab代码实现）内容概要：本文研究基于LOS（Line-of-Sight）算法与反步控制相结合的水下航行器（AUV/UUV）三维路径跟踪控制方法，并提供了完整的Matlab代码实现。通过构建水下航行器的动力学模型，结合LOS导引策略实现路径跟踪，利用反步控制方法设计控制器以保证系统稳定性与跟踪精度，有效应对海洋环境中的外部干扰与模型不确定性。文中详细阐述了控制算法的设计过程、稳定性分析及仿真验证，展示了在复杂三维路径下的良好跟踪性能。; 适合人群：具备自动控制理论、非线性控制基础及Matlab/Simulink仿真能力的研究生、科研人员及从事水下机器人控制开发的工程技术人员。; 使用场景及目标：①用于水下无人航行器路径跟踪控制系统的算法设计与仿真验证；②学习LOS导引法与反步控制在非线性系统中的综合应用；③为海洋机器人运动控制、自动驾驶等领域提供技术参考与代码实现模板。; 阅读建议：建议结合控制理论基础知识，逐步理解LOS算法的几何原理与反步控制的递推设计思想，重点分析Lyapunov稳定性证明过程，并通过Matlab代码调试与仿真实验加深对算法性能的理解。
基于YOLOv8的实时目标检测Web应用.zip
01-07
基于YOLOv8的实时目标检测Web应用.zip
基于PyQt5的YOLO标注工具集.zip
01-07
基于PyQt5的YOLO标注工具集.zip
What is the difference between commit and push?
06-22
The terms "commit" and "push" in Git refer to different stages of the version control process. Here’s a clear distinction between them: ### Commit A **commit** saves changes to the local repository. It creates a snapshot of the current state of the files in your working directory and adds it to the project's history. This action is entirely local and does not affect any remote repositories. - **Command**: ```bash git commit -m "Your commit message" ``` - **Purpose**: To record changes in the local repository with a descriptive message. ### Push A **push** sends your committed changes from the local repository to a remote repository (like GitHub, GitLab, etc.). This step updates the remote repository with your latest commits, making your changes accessible to collaborators. - **Command**: ```bash git push origin main ``` - **Purpose**: To upload local commits to the remote repository, allowing others to access your changes. ### Summary - **Commit**: Saves changes locally in the repository history. - **Push**: Sends local commits to the remote repository. Understanding these differences is crucial for effective collaboration and version control management. ### Knowledge Points - **Local vs Remote Repositories**: Commits are local; pushes update remote repositories. - **Version Control Workflow**: Commits capture changes; pushes share them. - **Collaboration**: Pushes enable team members to access your changes.
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值