arptables

 arptables v0.0.8

Usage: arptables -[AD] chain rule-specification [options]
       arptables -[RI] chain rulenum rule-specification [options]
       arptables -D chain rulenum [options]
       arptables -[LFZ] [chain] [options]
       arptables -[NX] chain
       arptables -E old-chain-name new-chain-name
       arptables -P chain target [options]
       arptables -h (print this help information)

Commands:
Either long or short options are allowed.
  --append  -A chain        Append to chain
  --delete  -D chain        Delete matching rule from chain
  --delete  -D chain rulenum
                Delete rule rulenum (1 = first) from chain
  --insert  -I chain [rulenum]
                Insert in chain as rulenum (default 1=first)
  --replace -R chain rulenum
                Replace rule rulenum (1 = first) in chain
  --list    -L [chain]        List the rules in a chain or all chains
  --flush   -F [chain]        Delete all rules in  chain or all chains
  --zero    -Z [chain]        Zero counters in chain or all chains
  --new     -N chain        Create a new user-defined chain
  --delete-chain
            -X [chain]        Delete a user-defined chain
  --policy  -P chain target
                Change policy on chain to target
  --rename-chain
            -E old-chain new-chain
                Change chain name, (moving any references)
Options:
  --source    -s [!] address[/mask]
                source specification
  --target     -d [!] address[/mask]
                destination specification
  --arhln      -a [!] length[/mask]
                               hardware address length
  --source-hw  -z [!] address[/mask]
                               source hardware address
  --target-hw  -y [!] address[/mask]
                               target hardware address
  --arhln      -a [!] length[/mask]
                               Hardware address length
  --arpop      -p [!] operation[/mask]
                               ARP operation
  --arhrd      -h [!] hrd[/mask]
                               ARP hardware address
  --arpro      -w [!] plen[/mask]
                               ARP protocol address format
  --in-interface -i [!] input name[+]
                network interface name ([+] for wildcard)
  --jump    -j target
                target for rule (may load target extension)
  --numeric    -n        numeric output of addresses and ports
  --out-interface -o [!] output name[+]
                network interface name ([+] for wildcard)
  --table    -t table    table to manipulate (default: `filter')
  --verbose    -v        verbose mode
  --line-numbers        print line numbers when listing
  --exact    -x        expand numbers (display exact values)
  --modprobe=<command>        try to insert modules using this command
  --set-counters PKTS BYTES    set the counter during insert/append
[!] --version    -V        print package version.

Standard v0.0.8 options:
(If target is DROP, ACCEPT, RETURN or nothing)

mangle target v0.0.8 options:
--mangle-ip-s IP address
--mangle-ip-d IP address
--mangle-hw-s hardware (MAC) address
--mangle-hw-d hardware (MAC) address
--mangle-target target (DROP, CONTINUE or ACCEPT -- default is ACCEPT)




果然好用 阿