配置dhcp自动获取地址

原创

于 2020-12-05 22:27:07 发布 · 849 阅读

CC 4.0 BY-SA版权

这篇博客详细记录了如何在华为路由器上配置DHCP服务，包括设置接口IP地址，启用DHCP服务，创建IP地址池，并为接口选择全局DHCP地址。通过这些步骤，使得GigabitEthernet0/0/0和GigabitEthernet0/0/1接口能够自动获取IP地址。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

在这里插入图片描述
Please press enter to start cmd line!
##########################################################

Dec 5 2020 22:04:29-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.

Dec 5 2020 22:04:29-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEt
hernet0/0/1 has turned into UP state.

sy
system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]
[Huawei]int
[Huawei]interface g
[Huawei]interface GigabitEthernet 0/0/0
[Huawei-GigabitEthernet0/0/0]ip ad
[Huawei-GigabitEthernet0/0/0]ip address 192.168.1.150 255.255.255.0
Dec 5 2020 22:05:50-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[2]:The line protocol
IP on the interface GigabitEthernet0/0/0 has entered the UP state.
[Huawei-GigabitEthernet0/0/0]
[Huawei-GigabitEthernet0/0/0]q
[Huaw