composite VS. inheritance

本文深入探讨了面向对象编程中继承和组合的概念,解释了它们如何帮助简化代码修改,同时强调了继承可能导致的脆弱封装问题。通过对比实例,说明了何时应该使用继承或组合来实现代码复用。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

原帖link:http://www.javaworld.com/jw-11-1998/jw-11-techniques.html?page=3

Inheritance:

When you establish an inheritance relationship between two classes, you get to take advantage of dynamic binding andpolymorphism. Dynamic binding means the JVM will decide at runtime which method implementation to invoke based on the class of the object. Polymorphism means you can use a variable of a superclass type to hold a reference to an object whose class is the superclass or any of its subclasses.

One of the prime benefits of dynamic binding and polymorphism is that they can help make code easier to change. If you have a fragment of code that uses a variable of a superclass type, such as Fruit, you could later create a brand new subclass, such as Banana, and the old code fragment will work without change with instances of the new subclass. If Bananaoverrides any of Fruit's methods that are invoked by the code fragment, dynamic binding will ensure that Banana's implementation of those methods gets executed. This will be true even though class Banana didn't exist when the code fragment was written and compiled.

In an inheritance relationship, superclasses are often said to be "fragile," because one little change to a superclass can ripple out and require changes in many other places in the application's code. 

For example, if you change the return type of a public method in class Fruit (a part of Fruit's interface), you can break the code that invokes that method on any reference of type Fruit or any subclass of Fruit. In addition, you break the code that defines any subclass of Fruit that overrides the method. Such subclasses won't compile until you go and change the return value of the overridden method to match the changed method in superclassFruit.

Inheritance is also sometimes said to provide "weak encapsulation," because if you have code that directly uses a subclass, such asApple, that code can be broken by changes to a superclass, such as Fruit. One of the ways to look at inheritance is that it allows subclass code to reuse superclass code. For example, if Appledoesn't override a method defined in its superclass FruitApple is in a sense reusing Fruit's implementation of the method. But Appleonly "weakly encapsulates" the Fruit code it is reusing, because changes to Fruit's interface can break code that directly usesApple.

总结:对于inheritance,如果你改变了base class的code,不仅derived class可能编译不过或者不能运行,连使用了derived class的code部分也不能reuse了。所以是"weak encapsulation"

Composite:

Composition provides an alternative way for Apple to reuse Fruit's implementation ofpeel(). Instead of extending FruitApple can hold a reference to a Fruit instance and define its own peel() method that simply invokes peel() on the Fruit.

In the composition approach, the subclass becomes the "front-end class," and the superclass becomes the "back-end class." With inheritance, a subclass automatically inherits an implemenation of any non-private superclass method that it doesn't override. With composition, by contrast, the front-end class must explicitly invoke a corresponding method in the back-end class from its own implementation of the method. This explicit call is sometimes called "forwarding" or "delegating" the method invocation to the back-end object. The composition approach to code reuse provides stronger encapsulation than inheritance, because a change to a back-end class needn't break any code that relies only on the front-end class. 

总结:

1. It is easier to change the interface of the back-end class then base class. 
    Composite: the change of the interface of the back-end class needs the change of the front-end class implementation, But not necessarily the change of the front-end interface.
    Inheritance: the change of base class interface  not only ripple down the inheritance hierarchy to derived class, but can also ripple out to code that uses just the derived class interface.

2. Composition allows you to delay the creation of back-end objects until (and unless) they are needed, as well as changing the back-end objects dynamically throughout the lifetime of the front-end object. 

3. It is easier to add new subclasses (inheritance) than it is to add new front-end classes (composition), because inheritance comes with polymorphism.

什么时候使用:

1. Make sure inheritance models the is-a relationship, for example, banana is a fruit. An important question to ask yourself when you think you have an is-a relationship is whether that is-a relationship will be constant throughout the lifetime of the application and, with luck, the lifecycle of the code. For example, you might think that an Employee is-aPerson, when really Employee represents a role that a Person plays part of the time. What if the person becomes unemployed? What if the person is both an Employee and a Supervisor? Such impermanent is-a relationships should usually be modelled with composition.

2. Don't use inheritance just to get code reuse. If all you really want is to reuse code and there is no is-a relationship in sight, use composition.
Don't use inheritance just to get at polymorphism. If all you really want is polymorphism, but there is no natural is-a relationship, use composition with interfaces. I'll be talking about this subject next month.


资源下载链接为: https://pan.quark.cn/s/1bfadf00ae14 “STC单片机电压测量”是一个以STC系列单片机为基础的电压检测应用案例,它涵盖了硬件电路设计、软件编程以及数据处理等核心知识点。STC单片机凭借其低功耗、高性价比和丰富的I/O接口,在电子工程领域得到了广泛应用。 STC是Specialized Technology Corporation的缩写,该公司的单片机基于8051内核,具备内部振荡器、高速运算能力、ISP(在系统编程)和IAP(在应用编程)功能,非常适合用于各种嵌入式控制系统。 在源代码方面,“浅雪”风格的代码通常简洁易懂,非常适合初学者学习。其中,“main.c”文件是程序的入口,包含了电压测量的核心逻辑;“STARTUP.A51”是启动代码,负责初始化单片机的硬件环境;“电压测量_uvopt.bak”和“电压测量_uvproj.bak”可能是Keil编译器的配置文件备份,用于设置编译选项和项目配置。 对于3S锂电池电压测量,3S锂电池由三节锂离子电池串联而成,标称电压为11.1V。测量时需要考虑电池的串联特性,通过分压电路将高电压转换为单片机可接受的范围,并实时监控,防止过充或过放,以确保电池的安全和寿命。 在电压测量电路设计中,“电压测量.lnp”文件可能包含电路布局信息,而“.hex”文件是编译后的机器码,用于烧录到单片机中。电路中通常会使用ADC(模拟数字转换器)将模拟电压信号转换为数字信号供单片机处理。 在软件编程方面,“StringData.h”文件可能包含程序中使用的字符串常量和数据结构定义。处理电压数据时,可能涉及浮点数运算,需要了解STC单片机对浮点数的支持情况,以及如何高效地存储和显示电压值。 用户界面方面,“电压测量.uvgui.kidd”可能是用户界面的配置文件,用于显示测量结果。在嵌入式系统中,用
资源下载链接为: https://pan.quark.cn/s/abbae039bf2a 在 Android 开发中,Fragment 是界面的一个模块化组件,可用于在 Activity 中灵活地添加、删除或替换。将 ListView 集成到 Fragment 中,能够实现数据的动态加载与列表形式展示,对于构建复杂且交互丰富的界面非常有帮助。本文将详细介绍如何在 Fragment 中使用 ListView。 首先,需要在 Fragment 的布局文件中添加 ListView 的 XML 定义。一个基本的 ListView 元素代码如下: 接着,创建适配器来填充 ListView 的数据。通常会使用 BaseAdapter 的子类,如 ArrayAdapter 或自定义适配器。例如,创建一个简单的 MyListAdapter,继承自 ArrayAdapter,并在构造函数中传入数据集: 在 Fragment 的 onCreateView 或 onActivityCreated 方法中,实例化 ListView 和适配器,并将适配器设置到 ListView 上: 为了提升用户体验,可以为 ListView 设置点击事件监听器: 性能优化也是关键。设置 ListView 的 android:cacheColorHint 属性可提升滚动流畅度。在 getView 方法中复用 convertView,可减少视图创建,提升性能。对于复杂需求,如异步加载数据,可使用 LoaderManager 和 CursorLoader,这能更好地管理数据加载,避免内存泄漏,支持数据变更时自动刷新。 总结来说,Fragment 中的 ListView 使用涉及布局设计、适配器创建与定制、数据绑定及事件监听。掌握这些步骤,可构建功能强大的应用。实际开发中,还需优化 ListView 性能,确保应用流畅运
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值