InputStream 与 OutputStream 类

最新推荐文章于 2025-04-10 16:26:36 发布

网速20M

最新推荐文章于 2025-04-10 16:26:36 发布

阅读量797

点赞数

分类专栏： java io 学习文章标签： io流

本文链接：https://blog.youkuaiyun.com/baidu_14922873/article/details/80597110

版权

java io 学习专栏收录该内容

11 篇文章

订阅专栏

本文详细介绍了Java中的InputStream和OutputStream类，包括它们的主要方法如read()、write()、skip()等的功能与实现细节，并解释了如何使用这些方法进行数据读写操作。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

概述

这两个类都是抽象类抽象类。基于jdk1.8.0_77。

InputStream

MAX_SKIP_BUFFER_SIZE

MAX_SKIP_BUFFER_SIZE：最大跳过字节数组为2048。当要跳过当前输入流的一段时，首先定义一个数组，不断的去读取数据，直到读取了传入的n个长度，或者是读到流结束为止。返回跳过的字节个数。

public long skip(long n) throws IOException {

        long remaining = n;
        int nr;

        if (n <= 0) {
            return 0;
        }

        int size = (int)Math.min(MAX_SKIP_BUFFER_SIZE, remaining);
        byte[] skipBuffer = new byte[size];
        while (remaining > 0) {
            nr = read(skipBuffer, 0, (int)Math.min(size, remaining));
            if (nr < 0) {
                break;
            }
            remaining -= nr;
        }

        return n - remaining;
    }

read抽象方法

read()：抽象方法，读入下一个字节，返回的值为 0-255 之间的一个数字，如果读到了流的结尾，读不出数据，则返回 -1，

/**
     * Reads the next byte of data from the input stream. The value byte is
     * returned as an <code>int</code> in the range <code>0</code> to
     * <code>255</code>. If no byte is available because the end of the stream
     * has been reached, the value <code>-1</code> is returned. This method
     * blocks until input data is available, the end of the stream is detected,
     * or an exception is thrown.
     *
     * <p> A subclass must provide an implementation of this method.
     *
     * @return     the next byte of data, or <code>-1</code> if the end of the
     *             stream is reached.
     * @exception  IOException  if an I/O error occurs.
     */
    public abstract int read() throws IOException;

read重载方法

从数组的 off 位置读入 len 长度的字节数据到 b[] 数组中，最后返回读取的字节数。

 public int read(byte b[], int off, int len) throws IOException {
        if (b == null) {
            throw new NullPointerException();
        } else if (off < 0 || len < 0 || len > b.length - off) {
            throw new IndexOutOfBoundsException();
        } else if (len == 0) {
            return 0;
        }

        int c = read();
        if (c == -1) {
            return -1;
        }
        b[off] = (byte)c;

        int i = 1;
        try {
            for (; i < len ; i++) {
                c = read();
                if (c == -1) {
                    break;
                }
                b[off + i] = (byte)c;
            }
        } catch (IOException ee) {
        }
        return i;
    }

从流中读出数据到数组中

   public int read(byte b[]) throws IOException {
        return read(b, 0, b.length);
 }

available

返回一个可以读或者忽略的估计值，但是不准确。具体使用没有遇到过。实现应该是在其子类中实现，子类可能会抛出异常，所以需要先在父类中定义好。

 /**
     * Returns an estimate of the number of bytes that can be read (or
     * skipped over) from this input stream without blocking by the next
     * invocation of a method for this input stream. The next invocation
     * might be the same thread or another thread.  A single read or skip of this
     * many bytes will not block, but may read or skip fewer bytes.
     *
     * <p> Note that while some implementations of {@code InputStream} will return
     * the total number of bytes in the stream, many will not.  It is
     * never correct to use the return value of this method to allocate
     * a buffer intended to hold all data in this stream.
     *
     * <p> A subclass' implementation of this method may choose to throw an
     * {@link IOException} if this input stream has been closed by
     * invoking the {@link #close()} method.
     *
     * <p> The {@code available} method for class {@code InputStream} always
     * returns {@code 0}.
     *
     * <p> This method should be overridden by subclasses.
     *
     * @return     an estimate of the number of bytes that can be read (or skipped
     *             over) from this input stream without blocking or {@code 0} when
     *             it reaches the end of the input stream.
     * @exception  IOException if an I/O error occurs.
     */
    public int available() throws IOException {
        return 0;
    }

close

close 方法，此处为空实现，由子类去实现。

    /**
     * Closes this input stream and releases any system resources associated
     * with the stream.
     *
     * <p> The <code>close</code> method of <code>InputStream</code> does
     * nothing.
     *
     * @exception  IOException  if an I/O error occurs.
     */
    public void close() throws IOException {}

mark/reset/markSupport

mark 定义一个方法，在输入流中标记当前位置，使用 reset 方法可以当前读流的位置重置到mark标记的位置。readlimit 制定最大的重读数，相当于新建一个数组，将这段数据读入数组中，那么就可重复的读取这段数据，但是超过了数组大小，就无法重读这段数据了。这段理解有问题，只是说明意思，很多的类不支持这种。

    /**
     * Marks the current position in this input stream. A subsequent call to
     * the <code>reset</code> method repositions this stream at the last marked
     * position so that subsequent reads re-read the same bytes.
     *
     * <p> The <code>readlimit</code> arguments tells this input stream to
     * allow that many bytes to be read before the mark position gets
     * invalidated.
     *
     * <p> The general contract of <code>mark</code> is that, if the method
     * <code>markSupported</code> returns <code>true</code>, the stream somehow
     * remembers all the bytes read after the call to <code>mark</code> and
     * stands ready to supply those same bytes again if and whenever the method
     * <code>reset</code> is called.  However, the stream is not required to
     * remember any data at all if more than <code>readlimit</code> bytes are
     * read from the stream before <code>reset</code> is called.
     *
     * <p> Marking a closed stream should not have any effect on the stream.
     *
     * <p> The <code>mark</code> method of <code>InputStream</code> does
     * nothing.
     *
     * @param   readlimit   the maximum limit of bytes that can be read before
     *                      the mark position becomes invalid.
     * @see     java.io.InputStream#reset()
     */
    public synchronized void mark(int readlimit) {}

markSupport ,当前流是否支持标记

    /**
     * Tests if this input stream supports the <code>mark</code> and
     * <code>reset</code> methods. Whether or not <code>mark</code> and
     * <code>reset</code> are supported is an invariant property of a
     * particular input stream instance. The <code>markSupported</code> method
     * of <code>InputStream</code> returns <code>false</code>.
     *
     * @return  <code>true</code> if this stream instance supports the mark
     *          and reset methods; <code>false</code> otherwise.
     * @see     java.io.InputStream#mark(int)
     * @see     java.io.InputStream#reset()
     */
    public boolean markSupported() {
        return false;
    }

reset 方法：我有时候都认为markSupport、mark、reset这三个方法是为数组类的流准备的，比如StringBufferInputStream/ByteArrayInputStream准备的。

/**
     * Repositions this stream to the position at the time the
     * <code>mark</code> method was last called on this input stream.
     *
     * <p> The general contract of <code>reset</code> is:
     *
     * <ul>
     * <li> If the method <code>markSupported</code> returns
     * <code>true</code>, then:
     *
     *     <ul><li> If the method <code>mark</code> has not been called since
     *     the stream was created, or the number of bytes read from the stream
     *     since <code>mark</code> was last called is larger than the argument
     *     to <code>mark</code> at that last call, then an
     *     <code>IOException</code> might be thrown.
     *
     *     <li> If such an <code>IOException</code> is not thrown, then the
     *     stream is reset to a state such that all the bytes read since the
     *     most recent call to <code>mark</code> (or since the start of the
     *     file, if <code>mark</code> has not been called) will be resupplied
     *     to subsequent callers of the <code>read</code> method, followed by
     *     any bytes that otherwise would have been the next input data as of
     *     the time of the call to <code>reset</code>. </ul>
     *
     * <li> If the method <code>markSupported</code> returns
     * <code>false</code>, then:
     *
     *     <ul><li> The call to <code>reset</code> may throw an
     *     <code>IOException</code>.
     *
     *     <li> If an <code>IOException</code> is not thrown, then the stream
     *     is reset to a fixed state that depends on the particular type of the
     *     input stream and how it was created. The bytes that will be supplied
     *     to subsequent callers of the <code>read</code> method depend on the
     *     particular type of the input stream. </ul></ul>
     *
     * <p>The method <code>reset</code> for class <code>InputStream</code>
     * does nothing except throw an <code>IOException</code>.
     *
     * @exception  IOException  if this stream has not been marked or if the
     *               mark has been invalidated.
     * @see     java.io.InputStream#mark(int)
     * @see     java.io.IOException
     */
    public synchronized void reset() throws IOException {
        throw new IOException("mark/reset not supported");
    }

OutputStream

write抽象类

write()：抽象函数，由具体类去实现。传入的为 int 类型，int为四个字节，低8位被使用，高24位被忽略

/**
     * Writes the specified byte to this output stream. The general
     * contract for <code>write</code> is that one byte is written
     * to the output stream. The byte to be written is the eight
     * low-order bits of the argument <code>b</code>. The 24
     * high-order bits of <code>b</code> are ignored.
     * <p>
     * Subclasses of <code>OutputStream</code> must provide an
     * implementation for this method.
     *
     * @param      b   the <code>byte</code>.
     * @exception  IOException  if an I/O error occurs. In particular,
     *             an <code>IOException</code> may be thrown if the
     *             output stream has been closed.
     */
    public abstract void write(int b) throws IOException;

write方法重载

write，将字节数组的 off 位置开始，写入 len 个长度

    /**
     * Writes <code>len</code> bytes from the specified byte array
     * starting at offset <code>off</code> to this output stream.
     * The general contract for <code>write(b, off, len)</code> is that
     * some of the bytes in the array <code>b</code> are written to the
     * output stream in order; element <code>b[off]</code> is the first
     * byte written and <code>b[off+len-1]</code> is the last byte written
     * by this operation.
     * <p>
     * The <code>write</code> method of <code>OutputStream</code> calls
     * the write method of one argument on each of the bytes to be
     * written out. Subclasses are encouraged to override this method and
     * provide a more efficient implementation.
     * <p>
     * If <code>b</code> is <code>null</code>, a
     * <code>NullPointerException</code> is thrown.
     * <p>
     * If <code>off</code> is negative, or <code>len</code> is negative, or
     * <code>off+len</code> is greater than the length of the array
     * <code>b</code>, then an <tt>IndexOutOfBoundsException</tt> is thrown.
     *
     * @param      b     the data.
     * @param      off   the start offset in the data.
     * @param      len   the number of bytes to write.
     * @exception  IOException  if an I/O error occurs. In particular,
     *             an <code>IOException</code> is thrown if the output
     *             stream is closed.
     */
    public void write(byte b[], int off, int len) throws IOException {
        if (b == null) {
            throw new NullPointerException();
        } else if ((off < 0) || (off > b.length) || (len < 0) ||
                   ((off + len) > b.length) || ((off + len) < 0)) {
            throw new IndexOutOfBoundsException();
        } else if (len == 0) {
            return;
        }
        for (int i = 0 ; i < len ; i++) {
            write(b[off + i]);
        }
    }

write，将数组内元素全部写入流中

   /**
     * Writes <code>b.length</code> bytes from the specified byte array
     * to this output stream. The general contract for <code>write(b)</code>
     * is that it should have exactly the same effect as the call
     * <code>write(b, 0, b.length)</code>.
     *
     * @param      b   the data.
     * @exception  IOException  if an I/O error occurs.
     * @see        java.io.OutputStream#write(byte[], int, int)
     */
    public void write(byte b[]) throws IOException {
        write(b, 0, b.length);
    }

flush

flush：如果是数组类的输出流，则强制数组内的字节写出。如果是文件流这种的，该方法仅仅保证之前写出的流传递给操作系统去写，却不能保证这些数据被立即写到文件中。

    /**
     * Flushes this output stream and forces any buffered output bytes
     * to be written out. The general contract of <code>flush</code> is
     * that calling it is an indication that, if any bytes previously
     * written have been buffered by the implementation of the output
     * stream, such bytes should immediately be written to their
     * intended destination.
     * <p>
     * If the intended destination of this stream is an abstraction provided by
     * the underlying operating system, for example a file, then flushing the
     * stream guarantees only that bytes previously written to the stream are
     * passed to the operating system for writing; it does not guarantee that
     * they are actually written to a physical device such as a disk drive.
     * <p>
     * The <code>flush</code> method of <code>OutputStream</code> does nothing.
     *
     * @exception  IOException  if an I/O error occurs.
     */
    public void flush() throws IOException {
    }

close

close，关闭输出流

/**
     * Closes this output stream and releases any system resources
     * associated with this stream. The general contract of <code>close</code>
     * is that it closes the output stream. A closed stream cannot perform
     * output operations and cannot be reopened.
     * <p>
     * The <code>close</code> method of <code>OutputStream</code> does nothing.
     *
     * @exception  IOException  if an I/O error occurs.
     */
    public void close() throws IOException {
    }