android BitmapFacty.Options的用法

本文介绍在Android开发中如何使用BitmapFactory.Options优化大图片加载,避免内存溢出。讲解了inJustDecodeBounds、inPreferredConfig、inSampleSize等关键配置项的作用及使用方法。

通常我们在开发android应用程序时,在加载图片时常常需要与Bitmap打交道,一般会使用BitmapFactory中提供的相关decode方法获取;

如果一张很大的图片,我们不加处理直接decode的话常常会抛出oom即 out of memory的异常。为了尽量避免这种情况的发生,我们就会

用到BitmapFactory中的一个内部类Options提供相关选项进行设置。

 inJustDecodeBounds 如果将其设为true的话,在decode时将会返回null,通过此设置可以去查询一个bitmap的属性,比如bitmap的长与宽,而不占用内存大小。

 

inPreferredConfig  通过设置此值可以用来降低内存消耗,默认为ARGB_8888: 每个像素4字节. 共32位。 
     Alpha_8: 只保存透明度,共8位,1字节。 
     ARGB_4444: 共16位,2字节。 
     RGB_565:共16位,2字节。 
     如果不需要透明度,可把默认值ARGB_8888改为RGB_565,节约一半内存。 

 

inSampleSize 对大图片进行压缩,可先设置Options.inJustDecodeBounds,获取Bitmap的外围数据,宽和高等。然后计算压缩比例,进行压缩。

inPurgeable与inInputShareable 二个是并列使用,如果设置了inPurgeable = false,则inInputShareable的值会被忽略;这二个选项的作用主要是便于系统及时

回收bitmap占用的内存; inPurgeable:设置为True,则使用BitmapFactory创建的Bitmap用于存储Pixel的内存空间,在系统内存不足时可以被回收,当应用需要再次访问

该Bitmap的Pixel时,系统会再次调用BitmapFactory 的decode方法重新生成Bitmap的Pixel数组。 设置为False时,表示不能被回收。 

 inInputShareable:设置是否深拷贝,与inPurgeable结合使用,inPurgeable为false时,该参数无意义

 

 

 

转载于:https://www.cnblogs.com/rookier/p/4612101.html

android Bitmap用法总结 Bitmap用法总结 1、Drawable → Bitmap public static Bitmap drawableToBitmap(Drawable drawable) { Bitmap bitmap = Bitmap .createBitmap( drawable.getIntrinsicWidth(), drawable.getIntrinsicHeight(), drawable.getOpacity() != PixelFormat.OPAQUE ? Bitmap.Config.ARGB_8888 : Bitmap.Config.RGB_565); Canvas canvas = new Canvas(bitmap); // canvas.setBitmap(bitmap); drawable.setBounds(0, 0, drawable.getIntrinsicWidth(), drawable.getIntrinsicHeight()); drawable.draw(canvas); return bitmap; } 2、从资源中获取Bitmap Resources res=getResources(); Bitmap bmp=BitmapFactory.decodeResource(res, R.drawable.pic); 3、Bitmap → byte[] private byte[] Bitmap2Bytes(Bitmap bm){ ByteArrayOutputStream baos = new ByteArrayOutputStream(); bm.compress(Bitmap.CompressFormat.PNG, 100, baos); return baos.toByteArray(); } 4、byte[] → Bitmap private Bitmap Bytes2Bimap(byte[] b){ if(b.length!=0){ return BitmapFactory.decodeByteArray(b, 0, b.length); } else { return null; } } 5、保存bitmap static boolean saveBitmap2file(Bitmap bmp,String filename){ CompressFormat format= Bitmap.CompressFormat.JPEG; int quality = 100; OutputStream stream = null; try { stream = new FileOutputStream("/sdcard/" + filename); } catch (FileNotFoundException e) { // TODO Auto-generated catch block Generated by Foxit PDF Creator © Foxit Software http://www.foxitsoftware.com For evaluation only. e.printStackTrace(); } return bmp.compress(format, quality, stream); } 6、将图片按自己的要求缩放 // 图片源 Bitmap bm = BitmapFactory.decodeStream(getResources() .openRawResource(R.drawable.dog)); // 获得图片的宽高 int width = bm.getWidth(); int height = bm.getHeight(); // 设置想要的大小 int newWidth = 320; int newHeight = 480; // 计算缩放比例 float scaleWidth = ((float) newWidth) / width; float scaleHeight = ((float) newHeight) / height; // 取得想要缩放的matrix参数 Matrix matrix = new Matrix(); matrix.postScale(scaleWidth, scaleHeight); // 得到新的图片 Bitmap newbm = Bitmap.createBitmap(bm, 0, 0, width, height, matrix, true); // 放在画布上 canvas.drawBitmap(newbm, 0, 0, paint); 相关知识链接:http://www.eoeandroid.com/thread-3162-1-1.html 7、bitmap用法小结 BitmapFactory.Options option = new BitmapFactory.Options(); option.inSampleSize = 2; //将图片设为原来宽高的1/2,防止内存溢出 Bitmap bm = BitmapFactory.decodeFile("",option);//文件流 URL url = new URL(""); InputStream is = url.openStream(); Bitmap bm = BitmapFactory.decodeStream(is); android:scaleType: android:scaleType是控制图片如何resized/moved来匹对ImageView的size。ImageView.ScaleType / android:scaleType值的意义区别: CENTER /center 按图片的原来size居中显示,当图片长/宽超过View的长/宽,则截取图片的居中部分 显示 CENTER_CROP / centerCrop 按比例扩大图片的size居中显示,使得图片长(宽)等于或大于View的长 (宽) CENTER_INSIDE / centerInside 将图片的内容完整居中显示,通过按比例缩小或原来的size使得图片 长/宽等于或小于View的长/宽 Generated by Foxit PDF Creator © Foxit Software http://www.foxitsoftware.com For evaluation only. FIT_CENTER / fitCenter 把图片按比例扩大/缩小到View的宽度,居中显示 FIT_END / fitEnd 把图片按比例扩大/缩小到View的宽度,显示在View的下部分位置 FIT_START / fitStart 把图片按比例扩大/缩小到View的宽度,显示在View的上部分位置 FIT_XY / fitXY 把图片 不按比例 扩大/缩小到View的大小显示 MATRIX / matrix 用矩阵来绘制,动态缩小放大图片来显示。 //放大缩小图片 public static Bitmap zoomBitmap(Bitmap bitmap,int w,int h){ int width = bitmap.getWidth(); int height = bitmap.getHeight(); Matrix matrix = new Matrix(); float scaleWidht = ((float)w / width); float scaleHeight = ((float)h / height); matrix.postScale(scaleWidht, scaleHeight); Bitmap newbmp = Bitmap.createBitmap(bitmap, 0, 0, width, height, matrix, true); return newbmp; } //将Drawable转化为Bitmap public static Bitmap drawableToBitmap(Drawable drawable){ int width = drawable.getIntrinsicWidth(); int height = drawable.getIntrinsicHeight(); Bitmap bitmap = Bitmap.createBitmap(width, height, drawable.getOpacity() != PixelFormat.OPAQUE ? Bitmap.Config.ARGB_8888 : Bitmap.Config.RGB_565); Canvas canvas = new Canvas(bitmap); drawable.setBounds(0,0,width,height); drawable.draw(canvas); return bitmap; Generated by Foxit PDF Creator © Foxit Software http://www.foxitsoftware.com For evaluation only. } //获得圆角图片的方法 public static Bitmap getRoundedCornerBitmap(Bitmap bitmap,float roundPx){ Bitmap output = Bitmap.createBitmap(bitmap.getWidth(), bitmap .getHeight(), Config.ARGB_8888); Canvas canvas = new Canvas(output); final int color = 0xff424242; final Paint paint = new Paint(); final Rect rect = new Rect(0, 0, bitmap.getWidth(), bitmap.getHeight()); final RectF rectF = new RectF(rect); paint.setAntiAlias(true); canvas.drawARGB(0, 0, 0, 0); paint.setColor(color); canvas.drawRoundRect(rectF, roundPx, roundPx, paint); paint.setXfermode(new PorterDuffXfermode(Mode.SRC_IN)); canvas.drawBitmap(bitmap, rect, rect, paint); return output; } //获得带倒影的图片方法 public static Bitmap createReflectionImageWithOrigin(Bitmap bitmap){ final int reflectionGap = 4; int width = bitmap.getWidth(); int height = bitmap.getHeight(); Matrix matrix = new Matrix(); matrix.preScale(1, -1); Bitmap reflectionImage = Bitmap.createBitmap(bitmap, 0, height/2, width, height/2, matrix, false); Bitmap bitmapWithReflection = Bitmap.createBitmap(width, (height + height/2), Config.ARGB_8888); Canvas canvas = new Canvas(bitmapWithReflection); canvas.drawBitmap(bitmap, 0, 0, null); Paint deafalutPaint = new Paint(); Generated by Foxit PDF Creator © Foxit Software http://www.foxitsoftware.com For evaluation only. canvas.drawRect(0, height,width,height + reflectionGap, deafalutPaint); canvas.drawBitmap(reflectionImage, 0, height + reflectionGap, null); Paint paint = new Paint(); LinearGradient shader = new LinearGradient(0, bitmap.getHeight(), 0, bitmapWithReflection.getHeight() + reflectionGap, 0x70ffffff, 0x00ffffff, TileMode.CLAMP); paint.setShader(shader); // Set the Transfer mode to be porter duff and destination in paint.setXfermode(new PorterDuffXfermode(Mode.DST_IN)); // Draw a rectangle using the paint with our linear gradient canvas.drawRect(0, height, width, bitmapWithReflection.getHeight() + reflectionGap, paint); return bitmapWithReflection; } }
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值