一篇比较好的破解LINUX密码方法

最新推荐文章于 2024-10-17 08:11:53 发布

转载最新推荐文章于 2024-10-17 08:11:53 发布 · 625 阅读

文章标签：

#破解 #linux #interface #command #list #basic

本文提供了一种通过命令行重启Linux系统并进入特定运行级别的方法，详细步骤包括重新启动机器并按任意键进入GRUB菜单，编辑引导参数，将运行级别设置为1，然后输入密码并重新启动。

1) Reboot the machine and hit any key when you see Grub kicking in. This will be after the BIOS checks but before any services start up.

2) You will now see a list of various kernels you can boot into, the first one in the list will probably be highlighted, and the default. It may be something like (for Fedora Core 4 multi-processor):
Fedora Core (2.6.11-1.1369_FC4smp)

3) Press "e" to edit the boot up arguments

4) These will look something like:
root (hd0,0)
kernel /vmlinuz-2.6.11-1.1369_FC4smp ro root=LABEL=/1 rhgb quiet
initrd /initrd-2.6.11-1.1369_FC4smp.img

5) Press the down arrow and then "e" to edit the kernel line, put a space and "1" at the end
kernel /vmlinuz-2.6.11-1.1369_FC4smp ro root=LABEL=/1 rhgb quiet 1

6) Hit enter and then type "b" to boot the kernel, the kernel will now boot to run level 1, rather than 3 or 5 which it will probably set to by default. It will only boot to run level 1 this time, and will then revert to 3 or 5.

7) After some basic services have started you should get a command prompt. Run the command passwd, and enter your new password. Now type reboot.

Commonly, run levels are used in the following way:

0 - Halt
1 - Single-user mode
2 - Not used (user-definable)
3 - Full multi-user mode (no GUI interface)
4 - Not used (user-definable)
5 - Full multiuser mode (with GUI interface)
6 - Reboot