墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
2k累计阅读
2k平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
哈喽，大家好，我是你们的 必问 福利菌Q妹。
Q妹今天都发现了哪些有趣好玩又有挑战的题目呢，不妨一起看看吧。
问题描述：
想用C#做一个VSTO程序，将当面页某个PPT页面（注意是PPT页面或页面上的所有元素）存入数据库，并能够写提取出来。我查遍了PPT的相关对象，都不知道如何来实现。具体如下面动图所示：
这个动图就是一个插件里的功能，从云端插入一个PPT页面到当面文档中，请问他的这些PPT图示是如何存放及调用的？请明白的人指点迷津，并给出示例代码。
我要去抢答>> https://biwen.youkuaiyun.com/question/1012
采用超级电容设计的UPS不间断电源，用于掉电数据保存，可续航10-60秒
关键词：树莓派 CM4 UPS 不间断电源 掉电保存 超级电容 SuperCap 充电 升压 续航 10F 法拉电容 Mcuzone 野芯科技 概述：我们经常会遇到系统意外掉电的情况，对于一些可靠性要求很高的工业现场设备或者运行过程中有重要数据需要保存的平台就需要UPS电源了。常规的UPS采用后备锂电池设计，具备无缝切换、续航时间长、稳定可靠等特点，但同时也有价格过高、体积过大的缺点。对于不少仅需在检测到系统掉电后对数据进行保存即可的应用而言，这些标准的UPS电源就不太合适，为此我...
手把手教你用Payload Dumper工具，把官方卡刷包变成线刷包救砖（附Fastbootd进入方法）
本文详细介绍了如何使用Payload Dumper工具将官方卡刷包转换为线刷包进行救砖操作。通过提取payload.bin文件中的分区镜像，并利用fastbootd模式完成刷写，帮助用户解决安卓设备系统故障问题。文章包含环境搭建、工具使用、常见问题解决方案等实用内容，适合需要刷机救砖的用户参考。
车辆贷款违约预测挑战赛
2021科大讯飞-车辆贷款违约预测挑战赛--方案简介车贷违约预测问题，目的是建立风险识别模型来预测可能违约的借款人。预测结果为借款人是否可能违约，属于二分类问题。偏数据挖掘的比赛，关键点是如何基于对数据的理解抽象归纳出有用的特征。站在大佬的视角，尝试学习总结，站在巨人的肩膀上，也许看得会更远一些。直接进入主题，开始学习套路，芜湖~特征工程1、常用库、数据导入import pandas as pd import numpy as np import lightgbm as lgb import xgboost
华为OD面试手撕真题 - 最大数
华为OD面试手撕真题 最大的数 提供Java、C++、Python、Go、JavaScript源码实现，并提供完整思路讲解
DaVinci配置DID之二：工具链配置
本系列主要基于DaVinCi工具链来展开具体DID读写的配置以及最终实现。1，CDD准备2，工具链配置3，代码实现4，验证结果本文讲述流程2话不多说，走你~博主也是AutoSar小白，如果哪里表达的有问题，还请大佬们指点指点哈。接下来，让我们在下章关于代码具体实现的博文再相会哈~
【Bluetooth蓝牙开发】一、开篇词 | 打造全网最详细的Bluetooth开发教程
1、开篇词 2、蓝牙开发入门 3、蓝牙协议栈总览 4、蓝牙协议栈——物理层 5、蓝牙协议栈——链路层 6、蓝牙协议栈——传输层 7、蓝牙协议栈——L2CAP协议 8、蓝牙协议栈——ATT协议 9、蓝牙协议栈——GATT协议 10、蓝牙通信流程分析 11、蓝牙协议栈——Bluez交叉编译 12、蓝牙调试工具汇总
pi-coding-agent 完整详解
pi-coding-agent是一个由Mario Zechner开发的专业AI编程助手，基于Node.js和TypeScript构建。核心功能包括：1)多级思考模式(ThinkingLevel)，从none到ultra控制推理深度；2)对话压缩(compaction)管理长对话记忆；3)WebSocket实时通信支持流式交互。该智能体支持代码生成、调试、重构等专业编程任务，采用AI Agent架构，具备工具调用和多轮记忆能力。项目结构通常包含server、agent、config等模块，可通过二次开发扩展功
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
lwip-2.0.3
lwip是瑞典计算机科学院(SICS)的Adam Dunkels 开发的一个小型开源的TCP/IP协议栈。实现的重点是在保持TCP协议主要功能的基础上减少对RAM 的占用。
VB摄像头监控
该VB模块可对摄像头捕获的画面进行录像等，可在创建的窗口进行控制
华为的C语言编程规范.pdf
华为技术有限公司内部技术规范。本规范制定了编写C语言程序的基本原则、规则和建议。从代码的清晰、简洁、可测试、安全、程序效率、可移植各个方面对C语言编程作出了具体指导。
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
6605
扫一扫
