Don't use runAllManagedModulesForAllRequests="true" when getting your MVC routing to work

最新推荐文章于 2024-05-15 17:52:00 发布

ape64628

最新推荐文章于 2024-05-15 17:52:00 发布

阅读量140

点赞数

文章标签：测试

原文链接：http://www.cnblogs.com/RadyGo/p/6134262.html

版权

It seems to be common advice to make your modules section of your web.config say <modules runAllManagedModulesForAllRequests="true">. In fact this is quite a drastic thing to do to solve the routing problem and has global effects that could CAUSE ERRORS.

You need a module that goes by the name of UrlRoutingModule-4.0 to be running through IIS. Now, since your MVC URLs are likely to end without .aspx these will not be picked up by IIS and run through the intergrated pipeline and therefore you will end up with 404 not found errors. I struggled with this when I was getting started until I found the <modules runAllManagedModulesForAllRequests="true"> workaround.

This highly recommended fix can cause other problems. These problems come in the form of making all your registered HTTP modules run on every request, not just managed requests (e.g. .aspx). This means modules will run on ever .jpg .gif .css .html .pdf etc.

This is:

a waste of resources if this wasn't the intended use of your other modules
a potential for errors from new unexpected behaviour.

Better solution

Fine, so the ranting about <modules runAllManagedModulesForAllRequests="true"> is over. What is a better solution?

In the modules section of your web.config, you can add the UrlRoutingModule-4.0 module in with a blank precondition meaning it will run on all requests. You will probably need to remove it first since it is most likely already registered at machine level. So make your web.config look like this:

 
         <modules> 
        
         <remove name= 
         "UrlRoutingModule-4.0" 
         /> 
        
         <add name= 
         "UrlRoutingModule-4.0" 
         type= 
         "System.Web.Routing.UrlRoutingModule" 
         preCondition= 
         "" 
         /> 
        
         <!-- any other modules you want to run  
         in 
         MVC e.g. FormsAuthentication, Roles etc. --> 
        
         </modules>