CentOS7报错 Job for network.service failed 解决办法

最新推荐文章于 2025-04-28 23:54:39 发布
最新推荐文章于 2025-04-28 23:54:39 发布
阅读量561 收藏 1
点赞数 3
文章标签： 大数据 运维 centos
本文为作者原创文章转载请与作者联系并注明出处
本文链接：https://blog.youkuaiyun.com/agatha_aggie/article/details/145721723
版权

起因是重启网卡systemctl restart network但是报错内容：
····
Job for network.service failed because the control process exited with
error code. See “systemctl status network.service” and “journalctl
-xe” for details.

输入win+R，在如下界面中输入services.msc。

在这里插入图片描述

把涉及到VMware的全部运行起来

在这里插入图片描述

好了~
Centos7网卡启动报错，Job for network.service failed because the control process exited with error code
棋耀的菜园
04-23 2808
Centos7网卡启动报错，Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details.
三种方法解决 Job for network.service failed. See 'systemctl status network.service' and 'journalctl -xn'问题
热门推荐
weixin_39663255的博客
07-03 7万+
 Failed to start LSB: Bring up/down networking 问题   1、执行 service network restart 出现以下错误 Restarting network (via systemctl):  Job for network.service failed. See 'systemctl status network.service' a...
CentOS7 网卡重启失败！Job for network.service failed because the control process exited with error code...
小驴程序源
10-21 1万+
问题描述： CentOS 7 重新设置了IP（static），重新启动网卡时出错。 执行命令：systemctl restart network 或者/etc/rc.d/init.d/network restart 提示：Job for network.service failed because the control process exited with error...
Linux下解决网卡重启失败Restarting network (via systemctl): Job for network.service failed 解决方案
最新发布
m0_73367097的博客
04-28 922
Restarting network (via systemctl): Job for network.service failed
Centos7 网络报错
weixin_34310369的博客
08-22 398
报错如下 job for network service failed because the control process exited with errot code . See "systemctl status network.service " and "journalctl -xe"for details 解决方案 执行 stop NetworkManager.service chk...
CentOS7重启后无法访问网络，网卡报Job for network.service failed because the control process exited with error cod
heyy1997的博客
08-18 1244
解决： [root@mina0 hadoop]# systemctl stop NetworkManager [root@mina0 hadoop]# systemctl disable NetworkManager ############## 然后：重启网卡即可： [root@mina0 hadoop]# systemctl restart network [root@mina0 hadoop]# ifconfig
Linux：Job for network.service failed because the control process exited with error code
OneMaruko的博客
12-25 3359
linux network报错
centOS7网卡启动失败，报错：Job for network.service failed because the control process exited with error code.
vegetablelan的博客
11-02 3090
启动网卡时报错： [root@hadoop103 su]# systemctl start network Job for network.service failed because the control process exited with error code. See “systemctl status network.service” and “journalctl -xe” for details. 查看系统日志： [root@hadoop103 su]# vi /var/log/messa
centos7重启网络报错"Job for network.service failed"
lieyanhaipo的专栏
09-16 2万+
1.centos7配置静态IP没有生效，查看配置没有问题，于是使用systemctl restart network.service ,但是报错 $ sudo service network restart Restarting network (via systemctl): Job for network.service failed. See *systemctl status netw
安装新光口网卡报错：【Job for network.service failed because the control process exited with error code】解决方案
SuYu_Wang的博客
05-09 4856
新装网卡配置后无法启动网络。报错：Job for network.service failed because the control process exited with error code
centos重启网络失败Job for network.service failed，ping不通网络
a1561532803的博客
04-25 2663
遇到的问题 执行systemctl restart network时报错 Restarting network (via systemctl): Job for network.service failed because the control process exited with error code. See “systemctl status network.service” and “journalctl -xe” for details. 解决方法 在网上找了很多方法，一般是直接关闭 Net
centos7无法启动网络systemctl restart netuork.service Job for network.service failed because the control pr
旧城以西的博客
10-27 2239
报错信息： 执行 service network restart时，出现以下错误 systemctl restart netuork.service Job for network.service failed because the control process exited with error code. See "sustemctl st atus network.service" and "journalctl -xe"for details. 根据提示，执行systemctl status
百分百解决Job for network.service failed. See ‘system的问题
麦客子
11-05 1983
哎，事件的起因说来话长，我这里记录一下，以免自己下次再出现这种错误时过于惊慌 想要解决问题的伙伴，可以直接往下拉 遇到这种问题，一般来说都是因为linux关机或者挂起的操作出现了问题所导致的 挂起或者开机开不了，发现 Centos kernel panic-not syncing:VFS:Unable to mount root fs on unknown block 原因：主要问题就是你更新了内核之后出现的问题。 解决方案：开机启动时 选择下面的旧版本的内核启动即可。这个我也不知道是那个内核，我之前
centos7重启网卡报Job for network.service failed because...错误
qq_39354297的博客
08-21 5006
解决： [root@mina0 hadoop]# systemctl stop NetworkManager[root@mina0 hadoop]# systemctl disable NetworkManager ############## 然后：重启网卡即可：[root@mina0 hadoop]# systemctl restart network[root@mina0 h...
Job for network.service failed because the control process exited with error code. See "systemc的解决办法
Spring Boot-Common On With You
09-22 3万+
问题概述 关于这个问题，博主是在虚拟机迁移的过程中遇到的，迁移完成后，需要对网络进行重新分配，配置完成后，重启网络服务时，报错：“ Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "jou...
CentOS7解决可ping通网络，但重启网络报Job for network.service failed because the control process exited with error
qq_45773650的博客
07-14 1840
加粗样式 在经过systemctl stop NetworkManager systemctl disable NetworkManager systemctl enable NetworkManager 或者修改Mac地址、重启操作仍无法解决情况下 解决办法：①先用ip addr 查看自己都有哪些网卡，它们都是叫什么名字 比如： 我的centos7就两个网卡，一个叫lo,L另一个叫ens32 ②查看/etc/sysconfig/network-scripts下，将其余无关的网卡位置文件全删掉，避免
Job for network.service failed because the control process exited with error code问题
初壹的博客
01-11 772
配置IP后重启网卡报错 Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details 在 /etc/sysconfig/network-script...
Job for network.service failed because the control process exited with error code.
weixin_46142986的博客
05-16 8882
Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details.
Restarting network (via systemctl): Job for network.service failed because the control process exit
cfy1009的博客
06-10 7489
Restarting network (via systemctl): Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details.
uniapp h5订阅按钮
06-21
UniApp 提供了一套完整的开发框架，支持快速开发原生应用和网页应用，其中包括H5页面的开发。在 UniApp 中，如果你想要实现H5页面的订阅功能，通常指的是用户可以通过点击按钮来关注或订阅你的内容，例如微信小程序中的"关注"功能。 UniApp H5中的订阅按钮可能不是直接内置的功能，但你可以通过集成第三方服务或者自定义JavaScript来实现。常见的做法是使用Web Push技术，结合服务端推送，当用户订阅后，服务端会发送消息到用户的浏览器，即使用户不打开页面也能收到通知。 具体步骤可能包括： 1. **注册服务**: 用户需要在浏览器设置中授权，允许你的网站发送推送通知。 2. **服务器端订阅处理**: 当用户点击订阅按钮，向服务器发送请求并存储用户的订阅信息。 3. **推送消息**: 在有新内容时，通过服务器发送推送通知到已订阅的用户。
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

Agatha方艺璇

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付：¥1
获取中
扫码支付

您的余额不足，请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值