ReadKey Test Program-优快云博客

本文介绍了一个使用ReadKey函数检测键盘输入并判断CapsLock是否开启的程序示例。通过设置延迟允许Windows处理消息循环，该程序在接收到按键输入后会报告CapsLock的状态。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

The following program tests ReadKey by waiting for a keypress and then reporting whether or not the CapsLock key is down. Note that, you must include a delay factor when calling ReadKey to allow time for MS-Windows to process its message loop:

Table 1: keyboard Control Key State Values.

Value	Meaning
CAPSLOCK_ON	The CAPS LOCK light is on.
ENHANCED_KEY	The key is enhanced.
LEFT_ALT_PRESSED	The left ALT key is pressed.
LEFT_CTRL_PRESSED	The left CTRL key is pressed.
NUMLOCK_ON	The NUM LOCK light is on.
RIGHT_ALT_PRESSED	The right ALT key is pressed.
RIGHT_CTRL_PRESSED	The right CTRL key is pressed.
SCROLLLOCK_ON	The SCROLL LOCK light is on.
SHIFT_PRESSED	The SHIFT key is pressed.

   TITLE Testing ReadKey (TestReadkey.asm)
INCLUDE Irvine32.inc
INCLUDE Macros.inc
.code
main PROC
L1: mov eax,10 ; delay for msg processing
call Delay
call ReadKey ; wait for a keypress
jz L1
test ebx,CAPSLOCK_ON
jz L2
mWrite <"CapsLock is ON",0dh,0ah>
jmp L3
L2: mWrite <"CapsLock is OFF",0dh,0ah>
L3: exit
main ENDP
END main