墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
1.8k累计阅读
1.8k平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
为了规范公司网络，让公司网络更加安全，需要对AP的无线访问点做账号密码登录限制，外来人员连接的时候不能直接访问公司内部服务器和电脑直接上互联网。单独为外来人员做guest访问点，只有上网的权限，无法访问公司内部电脑和服务器，做到网络隔离实现安全。
1.登录Sophos防火墙后，打开左侧的身份验证选项，第一项服务器，点击添加，这里我已经添加了两个域控制器的信息，域控制器的配置可以参考怎么搭建域控制器。
2.添加域控所需要的信息。
测试连接，连接成功。
3.选择服务这个选项，勾选刚刚添加的ad服务器，和防火墙关联认证，点击应用。
4.Web身份验证，配置，默认配置。
打开网页-在新的浏览器窗口中，意思是当用户连接到WiFi后会自动弹出认证界面，在浏览器的新窗口弹出。
注销用户-用户处于非互动状态时-考虑用户活动状态所需的数据流-100字节，3分钟
一分钟会AP
1、登录无线AP 无线AP默认情况下IP地址为192.168.1.1，默认的用户名和密码都为admin网络管理员一般是通过Web界面配置无线AP的，方法如下： 将无线AP的LAN口和主机相连，更改主机的IP地址和无线AP在同一网段。打开主机IE浏览器，在地址栏中输入http://192.168.1.1即可登录到配置界面。 2、更改默认设置 1）根据无线AP所处网段的IP地址更改其自身的IP
AD+radius完成802.1X认证
实际部署中，AD域、radius，应在搭配交换机、无线路由器或AP，完成基于AD域验证通过有线和无线连接的802.1X认证。本次采取寻找华为交换机、AP产品文档添加相关配置，未经测试，不一定能通。尽管交换机端口已关闭，但用户可以通过身份验证协议与 RADIUS 服务器通信。验证通过，RADIUS服务器会告诉交换机打开端口，用户将获得对网络的访问权限。FreeRADIUS部署在centos7上，需要将RADIUS服务器加入域控(加入域控需要安装samba)。AD域中配置该账号，配置完毕后centos上验证。
鸿蒙手机卸载内置应用 adb连接
**傻瓜式删除鸿蒙系统内置应用，自己亲测有效。**
深入LSM6DSL的FIFO连续模式：基于STM32和MEMS库的数据流高效处理指南
本文深入探讨了LSM6DSL的FIFO连续模式，结合STM32硬件平台和ST官方MEMS库，提供了高效的数据流处理方案。通过优化I2C通信时序、中断驱动设计以及动态ODR调整，实现低功耗数据采集与处理，显著提升嵌入式传感器应用的性能和续航能力。
基于集成运放心电放大器设计(原创)
原创作者：einyboy or alert 最近在看美剧《危机边缘》关于边缘科学的案件，科技控可以看一下，但建议不在吃东西的时候看。想像力是创造的思想源头，动手能力则是创造的车床。 自认为是没有想像力的那类，只能发挥动手能力了。 心电测量简介 图1 心电极接线图 如图1心电测试一般使用3个心电极进行测量，各个电极的说明如下： RA: Right Arm缩写，右手电极 LA: L...
ue4 角色奔跑/冲刺/蹲下 /蹲走 动作切换蓝图
序列：文章分为4部分： 一、准备工作+简单的蓝图连线 二、编写“行走” 混合空间 三、编写“蹲下”混合空间 四、合成2个动画，设置动画蓝图 —————————————— 一、准备工作 下载“动画初学者包”，添加到项目！ 主要文件： 打开BP_playerCharacter，组价——添加组件，找到“摄像机”，“机臂” 没有找到就去其他项目复制过来 ———————————— 手写人物的移动，也可以在...
浙江大学Fast-Lab从0制作自主空中机器人公开课教程补充及部分注意事项（适用于ubuntu系统和ROS零基础）
浙江大学Fast-Lab从0制作自主空中机器人公开课纯萌新补充（适用于从没接触过ubuntu系统），记录了一些自己不会的地方以及踩过的坑
Openai gym environment for multi-agent games
用于多智能体游戏的 OpenAI Gym 环境
半导体设备系列(2) 半导体设备与工厂控制仿真器Demo编写
基于C/S架构用C++编写半导体设备仿真器与工厂控制仿真器
Orange3实战教程：文本挖掘---标注语料库地图
Oreange3，文本挖掘，标注语料库地图用于在二维投影中可视化、聚类文档，并用关键词进行标注。
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
efm32 入门.pdf
本PDF共计22页，介绍的是操作驱动API，下载与否自己斟酌。
IMSL CNL 7.0.0 (x86-64)Crack
IMSL CNL 7.0.0 (x86-64)Crack intel的算法库破解文件，这是C++版本的破解文件
android 蓝牙通讯demo
android 下蓝牙通讯demo，实现了发现蓝牙，使能蓝牙，通过蓝牙发送消息。
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
1498
扫一扫
