对Jsecode项目的理解

【高分子材料工程】嵌件注塑结构设计与工艺优化:金属-塑料复合件界面强度及失效预防技术规范 内容概要:本文系统阐述了嵌件注塑(Insert Molding)的设计参数、模具关键技术及失效预防措施,聚焦黄铜H62或304不锈钢与PA66-GF30材料组合的基准工况,提供可用于工程图纸、DFM检查、模具验收和工艺规程的量化依据。内容涵盖工艺边界界定、材料匹配与界面力学分析、结构设计参数(如包覆壁厚、滚花、倒角)、模具设计要点(定位、浇口、排气、冷却)、工艺参数窗口、八大失效模式及其对策、验证验收标准以及量产控制要求,强调通过DFM仿真、模流分析和DOE试模优化工艺,并列出常见设计误区与纠正方案。; 适合人群:从事注塑产品设计、模具开发、工艺工程及质量管理的工程技术人员,尤其适用于汽车、电子、医疗等行业中具备1-3年及以上相关经验的研发人员; 使用场景及目标:①指导嵌件注塑零件的可制造性设计与结构优化;②支持模具设计评审与验收;③制定试模调机与量产工艺规范;④开展失效分析与质量改进; 阅读建议:此资源兼具理论机制与工程实践,建议结合实际项目对照查阅,重点关注包覆壁厚、预热温度、浇口布置等关键参数的取值边界,并在应用非基准材料时进行线膨胀系数与收缩率的换算修正,避免直接套用数据。 立即下载

项目是前后端分离的,如果单独访问后台总线,

输入地址:localhost:8080/gps>>http://localhost:8080/gps/test/main

superuser

jsecode@123


-----------------------------------------------------------------------------------------------------------------------------------------------------

而用地址:http://localhost:8080/sgat/访问的是前台的tomcat,

则需要在tomcat里面做一些配置

1.在webapps中放入前台打包过来的项目


http://localhost:8080/sgat/

superuser

jsecode@123

登录GAT项目

注意webapps就是在这里修改的:


2.说明下:如果上面已经双击修改了tomcat里面的内容了,这里可以不配置server.xml了


对比同事给我的server.xml和我自己下载的没做任何修改的tomcat中的server.xml文件

公司同事给的tomcat中的server.xml:


<?xml version="1.0" encoding="UTF-8"?>
<!--
  Licensed to the Apache Software Foundation (ASF) under one or more
  contributor license agreements.  See the NOTICE file distributed with
  this work for additional information regarding copyright ownership.
  The ASF licenses this file to You under the Apache License, Version 2.0
  (the "License"); you may not use this file except in compliance with
  the License.  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
--><!-- Note:  A "Server" is not itself a "Container", so you may not
     define subcomponents such as "Valves" at this level.
     Documentation at /docs/config/server.html
 --><Server port="8005" shutdown="SHUTDOWN">
  <Listener className="org.apache.catalina.startup.VersionLoggerListener"/>
  <!-- Security listener. Documentation at /docs/config/listeners.html
  <Listener className="org.apache.catalina.security.SecurityListener" />
  -->
  <!--APR library loader. Documentation at /docs/apr.html -->
  <Listener SSLEngine="on" className="org.apache.catalina.core.AprLifecycleListener"/>
  <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html -->
  <Listener className="org.apache.catalina.core.JasperListener"/>
  <!-- Prevent memory leaks due to use of particular java/javax APIs-->
  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener"/>
  <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"/>
  <Listener className="org.apache.catalina.core.ThreadLocalLeakPreventionListener"/>

  <!-- Global JNDI resources
       Documentation at /docs/jndi-resources-howto.html
  -->
  <GlobalNamingResources>
    <!-- Editable user database that can also be used by
         UserDatabaseRealm to authenticate users
    -->
    <Resource auth="Container" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" name="UserDatabase" pathname="conf/tomcat-users.xml" type="org.apache.catalina.UserDatabase"/>
  </GlobalNamingResources>

  <!-- A "Service" is a collection of one or more "Connectors" that share
       a single "Container" Note:  A "Service" is not itself a "Container",
       so you may not define subcomponents such as "Valves" at this level.
       Documentation at /docs/config/service.html
   -->
  <Service name="Catalina">

    <!--The connectors can use a shared executor, you can define one or more named thread pools-->
    <!--
    <Executor name="tomcatThreadPool" namePrefix="catalina-exec-"
        maxThreads="150" minSpareThreads="4"/>
    -->


    <!-- A "Connector" represents an endpoint by which requests are received
         and responses are returned. Documentation at :
         Java HTTP Connector: /docs/config/http.html (blocking & non-blocking)
         Java AJP  Connector: /docs/config/ajp.html
         APR (HTTP/AJP) Connector: /docs/apr.html
         Define a non-SSL HTTP/1.1 Connector on port 8080
    -->
    <Connector URIEncoding="UTF-8" connectionTimeout="20000" port="8080" protocol="HTTP/1.1" redirectPort="8443"/>
    <!-- A "Connector" using the shared thread pool-->
    <!--
    <Connector executor="tomcatThreadPool"
               port="8080" protocol="HTTP/1.1"
               connectionTimeout="20000"
               redirectPort="8443" />
    -->
    <!-- Define a SSL HTTP/1.1 Connector on port 8443
         This connector uses the BIO implementation that requires the JSSE
         style configuration. When using the APR/native implementation, the
         OpenSSL style configuration is required as described in the APR/native
         documentation -->
    <!--
    <Connector port="8443" protocol="org.apache.coyote.http11.Http11Protocol"
               maxThreads="150" SSLEnabled="true" scheme="https" secure="true"
               clientAuth="false" sslProtocol="TLS" />
    -->

    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <Connector port="8009" protocol="AJP/1.3" redirectPort="8443"/>


    <!-- An Engine represents the entry point (within Catalina) that processes
         every request.  The Engine implementation for Tomcat stand alone
         analyzes the HTTP headers included with the request, and passes them
         on to the appropriate Host (virtual host).
         Documentation at /docs/config/engine.html -->

    <!-- You should set jvmRoute to support load-balancing via AJP ie :
    <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1">
    -->
    <Engine defaultHost="localhost" name="Catalina">

      <!--For clustering, please take a look at documentation at:
          /docs/cluster-howto.html  (simple how to)
          /docs/config/cluster.html (reference documentation) -->
      <!--
      <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>
      -->

      <!-- Use the LockOutRealm to prevent attempts to guess user passwords
           via a brute-force attack -->
      <Realm className="org.apache.catalina.realm.LockOutRealm">
        <!-- This Realm uses the UserDatabase configured in the global JNDI
             resources under the key "UserDatabase".  Any edits
             that are performed against this UserDatabase are immediately
             available for use by the Realm.  -->
        <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>
      </Realm>

      <Host appBase="webapps" autoDeploy="true" name="localhost" unpackWARs="true">

        <!-- SingleSignOn valve, share authentication between web applications
             Documentation at: /docs/config/valve.html -->
        <!--
        <Valve className="org.apache.catalina.authenticator.SingleSignOn" />
        -->

        <!-- Access log processes all example.
             Documentation at: /docs/config/valve.html
             Note: The pattern used is equivalent to using pattern="common" -->
        <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" pattern="%h %l %u %t "%r" %s %b" prefix="localhost_access_log." suffix=".txt"/>

      <Context docBase="esb-web-sga" path="/gps" reloadable="true" source="org.eclipse.jst.jee.server:esb-web-sga"/></Host>
    </Engine>
  </Service>
</Server>

我自己下载的tomcat中的server.xml:


<?xml version='1.0' encoding='utf-8'?>
<!--
  Licensed to the Apache Software Foundation (ASF) under one or more
  contributor license agreements.  See the NOTICE file distributed with
  this work for additional information regarding copyright ownership.
  The ASF licenses this file to You under the Apache License, Version 2.0
  (the "License"); you may not use this file except in compliance with
  the License.  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
-->
<!-- Note:  A "Server" is not itself a "Container", so you may not
     define subcomponents such as "Valves" at this level.
     Documentation at /docs/config/server.html
 -->
<Server port="8005" shutdown="SHUTDOWN">
  <Listener className="org.apache.catalina.startup.VersionLoggerListener" />
  <!-- Security listener. Documentation at /docs/config/listeners.html
  <Listener className="org.apache.catalina.security.SecurityListener" />
  -->
  <!--APR library loader. Documentation at /docs/apr.html -->
  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />
  <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html -->
  <Listener className="org.apache.catalina.core.JasperListener" />
  <!-- Prevent memory leaks due to use of particular java/javax APIs-->
  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />
  <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
  <Listener className="org.apache.catalina.core.ThreadLocalLeakPreventionListener" />

  <!-- Global JNDI resources
       Documentation at /docs/jndi-resources-howto.html
  -->
  <GlobalNamingResources>
    <!-- Editable user database that can also be used by
         UserDatabaseRealm to authenticate users
    -->
    <Resource name="UserDatabase" auth="Container"
              type="org.apache.catalina.UserDatabase"
              description="User database that can be updated and saved"
              factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
              pathname="conf/tomcat-users.xml" />
  </GlobalNamingResources>

  <!-- A "Service" is a collection of one or more "Connectors" that share
       a single "Container" Note:  A "Service" is not itself a "Container",
       so you may not define subcomponents such as "Valves" at this level.
       Documentation at /docs/config/service.html
   -->
  <Service name="Catalina">

    <!--The connectors can use a shared executor, you can define one or more named thread pools-->
    <!--
    <Executor name="tomcatThreadPool" namePrefix="catalina-exec-"
        maxThreads="150" minSpareThreads="4"/>
    -->


    <!-- A "Connector" represents an endpoint by which requests are received
         and responses are returned. Documentation at :
         Java HTTP Connector: /docs/config/http.html (blocking & non-blocking)
         Java AJP  Connector: /docs/config/ajp.html
         APR (HTTP/AJP) Connector: /docs/apr.html
         Define a non-SSL HTTP/1.1 Connector on port 8080
    -->
    <Connector port="8080" protocol="HTTP/1.1"
               connectionTimeout="20000"
               redirectPort="8443" />
    <!-- A "Connector" using the shared thread pool-->
    <!--
    <Connector executor="tomcatThreadPool"
               port="8080" protocol="HTTP/1.1"
               connectionTimeout="20000"
               redirectPort="8443" />
    -->
    <!-- Define a SSL HTTP/1.1 Connector on port 8443
         This connector uses the BIO implementation that requires the JSSE
         style configuration. When using the APR/native implementation, the
         OpenSSL style configuration is required as described in the APR/native
         documentation -->
    <!--
    <Connector port="8443" protocol="org.apache.coyote.http11.Http11Protocol"
               maxThreads="150" SSLEnabled="true" scheme="https" secure="true"
               clientAuth="false" sslProtocol="TLS" />
    -->

    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />


    <!-- An Engine represents the entry point (within Catalina) that processes
         every request.  The Engine implementation for Tomcat stand alone
         analyzes the HTTP headers included with the request, and passes them
         on to the appropriate Host (virtual host).
         Documentation at /docs/config/engine.html -->

    <!-- You should set jvmRoute to support load-balancing via AJP ie :
    <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1">
    -->
    <Engine name="Catalina" defaultHost="localhost">

      <!--For clustering, please take a look at documentation at:
          /docs/cluster-howto.html  (simple how to)
          /docs/config/cluster.html (reference documentation) -->
      <!--
      <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>
      -->

      <!-- Use the LockOutRealm to prevent attempts to guess user passwords
           via a brute-force attack -->
      <Realm className="org.apache.catalina.realm.LockOutRealm">
        <!-- This Realm uses the UserDatabase configured in the global JNDI
             resources under the key "UserDatabase".  Any edits
             that are performed against this UserDatabase are immediately
             available for use by the Realm.  -->
        <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
               resourceName="UserDatabase"/>
      </Realm>

      <Host name="localhost"  appBase="webapps"
            unpackWARs="true" autoDeploy="true">

        <!-- SingleSignOn valve, share authentication between web applications
             Documentation at: /docs/config/valve.html -->
        <!--
        <Valve className="org.apache.catalina.authenticator.SingleSignOn" />
        -->

        <!-- Access log processes all example.
             Documentation at: /docs/config/valve.html
             Note: The pattern used is equivalent to using pattern="common" -->
        <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs"
               prefix="localhost_access_log." suffix=".txt"
               pattern="%h %l %u %t "%r" %s %b" />

      </Host>
    </Engine>
  </Service>
</Server>

附加说明:

这次我下载的是公安厅项目,它依赖这两个包,遂去江苏电力项目中下载后import进去



智慧医共体AI大模型赋能智能体平台及AI场景应用规划方案(决策评审版).pptx 立即下载

相关推荐

14-15日周末听写音频.mp3

14-15日周末听写音频.mp3

Jsecode maven仓库地址

公司maven仓库地址:http://artifactory.jsecode.com/artifactory/libs-release/

兴趣是最好的老师 860

图腾柱无桥PFC变换器+平均电流控制+PI电压双闭环前馈控制设计(Simulink仿真实现)

内容概要:本文系统研究了图腾柱无桥PFC变换器的高效率控制策略,采用平均电流控制结合PI电压双闭环前馈控制,利用Simulink平台构建完整的系统仿真模型,涵盖主电路拓扑、控制环路设计、关键参数计算及动态性能验证。研究重点在于提升功率因数、降低输入电流谐波含量,并确保输出电压的高度稳定性。通过仿真分析,全面评估了系统在启动、稳态运行及抗干扰等方面的性能表现,充分展现了现代电力电子变换器在高效能、高可靠性方面的先进控制技术应用; 适合人群:具备一定电力电子技术基础和Simulink仿真能力的电气工程及相关专业的研究生、科研人员及企业研发工程师; 使用场景及目标:①研究高效率PFC变换器的控制策略;②掌握图腾柱无桥PFC电路的工作原理与建模方法;③开展新能源、电动汽车充电、工业电源等领域中高性能整流器的技术开发与性能优化; 阅读建议:建议读者结合Simulink仿真模型同步操作,重点关注控制环路的设计细节与参数整定过程,深入理解平均电流控制与双闭环前馈控制的协同机制,同时可拓展至不同工况下的性能测试以增强工程实践能力。

maven项目缺jar问题解决

重新Update项目去路径下查看,可以看到jar重新下好了

兴趣是最好的老师 453

力软敏捷开发框架源码7.0.6旗舰版 JNPF开发平台3.4.5 企业版 旗舰版

JNPF作为作为一款深受用户喜爱的低代码产品,凭借雄厚的科研技术力量、丰富的软件开发项目经验、严谨的项目开发流程和高质量的售后服务,已成功帮助千家企业完成数字化项目,建立了覆盖不同行业客户和不同发展阶段的软件产品服务体系。

huoooos0的博客 1843

STM32 SAI接口TDM模式实战:8通道音频采集系统搭建全流程(附DMA配置代码)

本文详细介绍了基于STM32 SAI接口TDM模式搭建8通道音频采集系统的全流程。内容涵盖硬件连接设计、CubeMX时钟树与SAI外设的详细配置,并重点解析了TDM模式的核心代码实现与DMA双缓冲机制,提供了完整的配置代码和常见时序问题排查指南,助力开发者高效实现多通道音频传输与处理。

weixin_29192211的博客 505

保留两位小数:数据库字段类型NUMBER,Java字段类型Double类型

1.数据库字段类型 查出的数据小数点后带两位小数 2.后台查出的json却没有两位小数 [{ recordId : 20170320142740038015948, appSysId : 23551, appDeptId : 3, orgDeptName : null, carHostNO : 1019, secureNo : 111, sec

兴趣是最好的老师 4453

解决ArcGIS-OpenStreetMap Toolbox-Load OSM File错误

在安装成功OpenStreetMap Toolbox后,首次运行Load OSM File工具,出现以下错误

Zjf的博客 8821

sum over partition by函数的用法-但是查出来的数据格式不好给前台用,废弃

要求:按车牌号HOST_NO分组,合计CAR_PAY金额,最后合计所有金额,还要过滤出本月的时间 参考: http://blog.youkuaiyun.com/wawmg/article/details/40840093

兴趣是最好的老师 2492

保姆级教程:用MediaPipe和BlazePose在Python里实时追踪你的健身动作(附完整代码)

本文提供了一份详细的Python教程,教你如何使用MediaPipe和BlazePose实现实时健身动作追踪。从环境配置、模型选型到实时视频流处理架构设计,再到健身动作量化分析和可视化反馈系统优化,教程涵盖了完整的实现步骤和代码示例,帮助开发者快速构建高效的姿态特征点检测系统。

weixin_42531779的博客 155

Python自动化神器:5分钟搞定PSCAD仿真波形图导出到Word(附WPS兼容方案)

本文介绍如何利用Python自动化库快速将PSCAD仿真波形图导出到Word或WPS,大幅提升电力系统仿真工程师的工作效率。通过精准坐标定位、智能排版和批量处理功能,实现仿真报告的自动化生成,同时提供WPS兼容方案,适用于不同办公环境。

sony5的博客 209

GAT项目新需求:加油管理修改

新需求:加油管理列表要带付费方式,如果是加油卡,则显示卡号,类似江苏电力这样的页面 开发: 1.先增加数据库CAR_OIL表字段和注释 alter table CAR_OIL ADD  OILCARD_NO VARCHAR2(100); alter table CAR_OIL ADD  PAYTYPE NUMBER(2);  comment on column

兴趣是最好的老师 1415

软件工程:数据字典

数据字典

永远怀着至诚之心拥抱世界 4281

解决GAT项目Bug: 用车审批中审批人登录系统后,看不到申请人提交的单子

描述:警保部下面的部门的人申请的单子,警保部的负责审批的人看不到 解决: 1.点击页面找到请求url 2.运用阿楠给我的工具,可以获取后台的url 双击testFrom0(),得到 3.找到代码 修改代码: 修改好代码: 断点打印正确的sql: 断点打印的错误的sql: select create_

兴趣是最好的老师 1311

【原创】汇川H5U PLC控制伺服的方法

6、在线调试-进入伺服调试,可以在本软件上进行调试,可以实现原点回归、正向点动、反向电动、使能(这里使能打开时触摸屏上的使能不能打开,会冲突)、复位、停止(如下图所示)。5、在原点返回设置中一般情况下对原点信号、正限位、负限位、原点返回方向、原点返回方式进行设置,其他设置默认不改(如下图所示)。3、在单位换算设置上只需要修改脉冲数和移动量(根据伺服配套导轨上名牌进行设置),其他设置默认不改(如下图所示)。11、双击后右边出现编辑框 在上半部分定义变量(IN、INOUT、OUT、VAR)(如下图所示)。

Qinmingyue13的博客 6683

新版CKA2020-2020-10-13-真题试卷

2020年10月13日 真题 新版CKA考试已于2020年9月1日正式上线! 考试模式:线上考试 考试时间:2小时 认证有效期:3年 软件版本:Kubernetes v1.19 重考政策:可接受1次重考 经验水平:中級 题目数量:17题 01 Task - 英文 Create a new ClusterRole named deployment-clusterrole that only allows the creation of the following resource types: Depl

随笔记录-分享&记忆 2395

GAT项目新需求:保险管理修改

1.需求: 2.原表 3.现表 4.SQL语句: --删除字段 ALTER TABLE CAR_SECURE DROP COLUMN SECURE_ACC_NO ALTER TABLE CAR_SECURE DROP COLUMN SECURE_ACC_PAY ALTER TABLE CAR_SECURE DROP COLUMN SECURE_NUM

兴趣是最好的老师 1150

android 蓝牙通讯demo

android 下蓝牙通讯demo,实现了发现蓝牙,使能蓝牙,通过蓝牙发送消息。

WF公务车新需求:申请单和派车单编号修改

1.需求:申请单改成YCSQD_日期_1 2 3累加,跨年后重新从1开始累加,派车单改成申请单编号_CCD 2.找到相关代码 原申请单编号生成代码:YCSQD_20170410_1、YCSQD_20170410_2、YCSQD_20170411_1、YCSQD_20170411_2 @Override public synchronized String get

兴趣是最好的老师 1072

ssm框架搭建

这个是一个在idea上成功跑起来的ssm框架项目,保存在这里方便以后使用直接下载

NTscan扫描工具

ntscan是一个扫描器,可以扫描没有密码和弱密码的共享,先到配置文件中填写猜测的用户名和密码,扫描过程中右侧出现的是扫描日志。

GAT-解决用车审批中,如果调度车辆是通过Excel导入的车辆,会有错误提示Bug

proxool.xml config.properties webgps.db.default.schema=STCS -----------------------------------------------------------------------------------------------------------------------------------

兴趣是最好的老师 1049

温度PID控制PLC程序

温度PID稳定控制程序,适用于欧姆龙PLC,对其他PLC也具有很大参考价值

解决GAT项目Bug:导入Excel的时候没有对日期格式进行验证

问题描述:导入Excel的时候没有对日期格式进行验证 修改代码:增加对日期的验证 使用的代码: import java.text.DateFormat; import java.text.ParseException; import java.text.SimpleDateFormat; import java.util.Date; pub

兴趣是最好的老师 1037

GAT保险模块的修改

1.示意图 . 2.数据库的修改 drop table CAR_SECURE; -- Create table create table CAR_SECURE ( record_id VARCHAR2(32) not null, host_no VARCHAR2(32), secure_no

兴趣是最好的老师 975

惠安惠达新需求:增加起始里程和结束里程

代码:主要要传hosti和查询的时间范围

兴趣是最好的老师 964

解决GAT项目Bug:轨迹分析查询不到数据

问题描述:左边没数据,地图上也没轨迹 控制台信息:没有该方法 搜索该类: 发现类存在于两个项目中,GAT已经引用了公司通用的jar包,而GAT代码中依然写了重复的代码,造成了冲突 解决办法:把这两个包下的代码删了,提交即可

兴趣是最好的老师 923

GWC和GAT项目搭建过程

1.说明: 公安厅项目有两个模块是依赖电力项目或者公务车项目的 公务车: 公安厅: 所以,如果单独部署公安厅项目,需要去电力或者公务车中下载上面两个包 -----------------------------------------------------------------------------------------------------------

兴趣是最好的老师 923

代码:用车申请-列表查询

/*我的用车申请列表查询接口*/ @RequestMapping(value = "/apply/myList", method = RequestMethod.POST, produces = "application/json") @ResponseBody public BaseResp applyList(@RequestBody VehUseApplyInfoListReq biz

兴趣是最好的老师 898

JS电力、SD电力、GAT的配置

修改数据库要修改两个地方的内容 江苏电力: esb-web        - config.properties  ->  webgps.db.default.schema=JSDLCS        - proxool.xml  ->  @192.168.1.134:1521:gpscs

兴趣是最好的老师 837
上一篇: Maven-搭建Maven私服的方法
下一篇: Eclipse-设置JVM的内存参数
ZHOU_VIP
博客等级 码龄11年 1万+粉丝 1779原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

ZHOU_VIP

您的鼓励将是我创作最大的动力!

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值