802.11Ax standard IPQ6018 IPQ6010 QCN9074 Wifi Socs: DR6018 DR9074-6E 1.5GMbps Throughput

Introduction

In this technical post, we will explore the powerful combination of a WiFi 6 routerboard and the DR9074-6E network card to achieve high-power throughput, long-range connectivity up to 23 kilometers, and efficient AP controller management in both Point-to-Point (PTP) and Point-to-MultiPoint (PTMP) network setups.

1. Hardware Components

1.1 WiFi 6 Routerboard

Select a WiFi 6 routerboard with support for high-gain antennas and robust processing capabilities.

Ensure it is compatible with the DR9074-6E network card.

1.2 DR9074-6E Network Card

The DR9074-6E network card is a powerful dual-band WiFi 6 (802.11ax) module designed for long-range, high-throughput applications.

It is equipped with multiple external antenna connectors for enhanced signal strength.

2. High-Power Throughput

2.1 Routerboard Configuration

Optimize router settings for high-power transmission and receive sensitivity.

Increase the TX power to the legal maximum while complying with local regulations.

Utilize MU-MIMO and beamforming technology to maximize the throughput by focusing the signal towards specific devices.

2.2 DR9074-6E Network Card Configuration

Enable the DR9074-6E network card's advanced WiFi 6 capabilities.

Fine-tune the antenna settings to match the chosen high-gain antennas.

3. Long-Range Connectivity (Up to 23 Km)

3.1 Antenna Selection

Choose high-gain directional antennas for PTP scenarios, ensuring a narrow beamwidth to increase range.

In PTMP scenarios, select sector antennas for a broader coverage area.

3.2 Line of Sight (LOS)

Establish a clear line of sight between the transmitting and receiving points.

Use site survey tools to identify any potential obstructions, and plan your deployment accordingly.

3.3 Adjust Frequency and Channel Width

Utilize lower-frequency bands (e.g., 5 GHz) for improved long-range connectivity.

Narrow the channel width for greater signal stability, especially in PTP setups.

4. AP Controller Manager

4.1 Centralized Control

Implement an Access Point (AP) controller manager to centrally manage and monitor your network.

Ensure it is compatible with your routerboard and network card combination.

4.2 Configuration Management

Configure your AP controller to manage multiple access points, making it easier to control and monitor your network.

4.3 Security and Authentication

Implement strong security protocols for network access, including WPA3 encryption and enterprise-level authentication methods.

5. PTP and PTMP Configurations

5.1 PTP (Point-to-Point)

Set up the routerboard and network card in PTP mode for dedicated, high-speed connections between two locations.

Ensure accurate alignment between the directional antennas to establish a stable connection.

5.2 PTMP (Point-to-MultiPoint)

Use sector antennas and fine-tune their beamwidth to cover multiple client devices in a specific area.

Configure the routerboard and network card for efficient resource allocation among clients.

DR6018

Website:https://www.wallystech.com/Routerboard/DR6018V4-wifi6-Qualcomm-IPQ6010-IPQ6018-FAMILY-2T2R-2.5G-ETH-port-supporting-5G-celluar-Modem-802-11AX-MU-MIMO-OFDMA.html

Qualcomm-Atheros IPQ6010

Quad-core ARM 64bit A53 @1.8GHz Processor 

1GB DDRL3L System Memory 

32MB NOR Flash, 256MB NAND Flash 

Supports Dynamic Frequency Selection (DFS) 

2x2 On-board 2.4GHz radio, up to 573Mbps physical Data Rate 

2x2 On-board 5GHz radio, up to 1201Mbps physical Data Rate

Support: QUECTEL RM500Q-GL

Support: QCN9074 WiFi 6E Card

Support Openwifi

Support QSDK

DR9074-TRIBAND

Website:

https://www.wallystech.com/Network_Card/DR9074-Triband-Wifi6E-Qualcomm-QCN9024-Tri-Band-2.4G-5G-6GHz-4T4R-M-2-E-Key-Interface-802-11ax-Wallys.html

Features

Qualcomm Atheros QCN9024

Maxim 23 dBm per chain,up to 4949Mbps

Data Rateup to 4949Mbps

Support  Tri Band 2.4GHz&5GHz&6GHz 4x4 WiFi 6E (802.11ax)

4 spatial streams (4SS)

M.2 E Key Interface

PCI Express 3 .0 Interface

Applications

Security Surveillance

Commercial radio coverage

Hotel Wireless application

Forest fire protection engineering

Country coverage

Some special scene application

Conclusion

By combining a WiFi 6 routerboard with a high-performance network card like the DR9074-6E, it is possible to achieve impressive high-power throughput and long-range connectivity up to 23 kilometers. With the addition of AP controller management, you can streamline network administration and effectively deploy both PTP and PTMP solutions. This powerful combination opens up numerous possibilities for robust, long-range wireless networks in various applications, from rural internet connectivity to enterprise-level wireless infrastructure.

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值