Leveraging 802.11ax：Powerful IPQ8072/IPQ8074 Socs for Industrial Applications

Introduction:

The rapid advancement of wireless technology has revolutionized industries across the globe, enabling unprecedented connectivity, automation, and data exchange. The 802.11ax (Wi-Fi 6) standard, coupled with robust hardware solutions like the IPQ8072 and IPQ8074, is ushering in a new era of industrial applications with enhanced performance, reliability, and security. This article delves into the technical details of how 802.11ax and the IPQ8072/IPQ8074 solution are poised to transform various industrial sectors.

I. Evolution of Wi-Fi Standards:

The evolution of Wi-Fi standards has seen a gradual improvement in throughput, latency, and spectrum efficiency. 802.11ax, the latest iteration, introduces significant enhancements over its predecessor (802.11ac) to meet the demanding requirements of industrial environments. Key features of 802.11ax include Orthogonal Frequency Division Multiple Access (OFDMA), Basic Service Set (BSS) Coloring, and Target Wake Time (TWT).

II. IPQ8072/IPQ8074 Overview:

The IPQ8072 and IPQ8074 are cutting-edge wireless networking chipsets designed to harness the capabilities of 802.11ax. These powerful solutions offer multi-gigabit throughput, advanced signal processing, and robust security features. With multi-core processors, hardware acceleration, and support for MU-MIMO (Multi-User, Multiple Input Multiple Output), these chipsets are tailor-made for demanding industrial applications.

III. Industrial Applications and Benefits:

A. Factory Automation:

Real-time monitoring: 802.11ax's reduced latency and improved QoS (Quality of Service) ensure seamless data transmission for critical machinery monitoring and control.

IoT integration: The increased device density support and OFDMA enable factories to accommodate a multitude of IoT devices without compromising performance.

B. Warehousing and Logistics:

Wireless robotics: The low-latency and high-throughput capabilities of 802.11ax facilitate efficient communication between automated guided vehicles (AGVs) and central systems.

Dense environments: BSS Coloring mitigates interference in congested areas, ensuring reliable communication in warehouses with high device densities.

C. Energy and Utilities:

Smart grid communication: IPQ8072/IPQ8074's multi-gigabit speeds enable rapid data transfer for real-time monitoring and control of power distribution systems.

calable deployments: OFDMA enables partitioning of frequency bands for different services, optimizing network utilization across diverse utility applications.

IV. Security Considerations:

Industrial networks demand robust security mechanisms to safeguard critical operations and data. TheIPQ8072/IPQ8074 chipsets support WPA3 encryption, secure boot, and hardware-accelerated AES encryption, providing end-to-end protection against unauthorized access and data breaches.

V. Future Trends and Conclusion:

The marriage of 802.11ax technology with the IPQ8072/IPQ8074 solution presents a transformative opportunity for industrial applications. As industries embrace automation, IoT, and real-time data analytics, the seamless connectivity, low latency, and high throughput of this technology stack will drive innovation and efficiency. However, careful network design, deployment, and ongoing management are crucial to fully realize the potential of this powerful combination in the dynamic world of industrial wireless communication.

1.DR8072V01

Website:

PRODUCTS_Wallys Communications (Suzhou ) Co., LTD

Features

■ Qualcomm Atheros IPQ8072A AR Quad Core CPU

■ On-board 5GHz radio, up to 2475 Mbps physical data rate,On-board 2.4GHz radio, up to 1147Mbps physical data rate

■ 8 MB NOR Flash, 256MB NAND Flash（NAND Flash can be up to 1GB as optional）

■ Support 11ax TX Beamforming,Support 11ac/ax MU-MIMO DL and UL,Support OFDMA DL and UL

■ Supports Dynamic Frequency Selection (DFS)

■ DDR 1GB DDR3L(Support DDR3L can be up to 2GB as optional)

■ M.2 connector can support QCN9074 production 

Absolute Maximum Rating

Parameter Rating Unit

Operating Temperature Range -20 to +70 ºC

Storage Temperature Range -40 to +90 ºC

Operating Humidity Range 5 to +95 (non-condensing) %

Storage Humidity Range 0 to +90 (non-condensing)

Hardware Specifications

Symbol Parameter

CPU Qualcomm Atheros Quad Core ARM Cortex 64-bit A53 Processor IPQ8072A 2.2GHz CPU

CPU Frequency Derived from Qualcomm Atheros AP.HK09

System Memory 1x 512MB, DDR4 2400MHz 16-bit interface(RAM can be up to 2GB as optional)

Frequency Range 2.412~2.472GHz,  5.150~5.825GHZ M.2 Slot 1x M.2 Slot with PCIe 3.0

Modulation Techniques OFDMA: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

Environmental Temperature

Operating: -20ºC to 70ºC,

Storage: -40ºC to 90ºC

NOR Flash: 8 MB

DC Jack Input 1x DC Jack Connector: 12V

Interface 4x 1Gbps Ethernet Port,  1x 10Gbps Ethernet Port  1x 10Gbps SFP

2x USB 3.0 Port  1x JTAG 20 Pin Connector 1x Serial Port 4 Pin Connector

LED 2x RGB LED Indicators

Power Consumption TBD

BY:Wallys Communications (Suzhou ) Co., LTD

EMAIL:​sales4@wallystech.com