4月20 到 5月24,整整一个月的工作找寻期,结束了。
珍惜这份工作。比之前要更加有进取心。我输在了进取心,不能再输。
墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
500+累计阅读
532平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年,写一次发全网
我也要 →
码龄19年
4月20 到 5月24,整整一个月的工作找寻期,结束了。
珍惜这份工作。比之前要更加有进取心。我输在了进取心,不能再输。
时序数据库避坑指南:TDengine与IoTDB在车联网场景的7个关键对比
本文对比了时序数据库TDengine与IoTDB在车联网场景下的7个关键差异,包括数据模型设计、边缘-云端协同能力、车规级函数库、存储压缩算法等。通过真实案例和性能测试,帮助企业在新能源汽车大数据处理中选择合适的时序数据库,优化存储成本和实时告警性能。
新的一年开始了,一切重新开始
一切都将重新开始,新的一年里,一切都变成了未知.
移动机器人底盘-四轮差速模型(四轮独立)
对于底盘的前轮和后轮来说,其速度是同步的,那么在理想条件下,可以将底盘运动视为以ICR为圆心做圆周运动,对于四个轮子来说,圆周运动的角速度是一致的,圆周运动圆心ICR始终位于底盘几何中心COG的y轴延长线上,ICR与COG之间的距离。有关,整个底盘的速度位于速度瞬心COM处,用。四轮差速底盘设定左轮、右轮得速度分别为。圆周运动的角速度公式如式1所示。受约束,约束与圆周运动的角速度。合成,设四个轮子的速度分别为。,设左轮和右轮之间的轴距为。为圆周运动角速度,线速度为。,其均由预设目标速度。
2020新的一年新的开始
2020新的一年新的开始
高分7(GF7)卫星数据制作平原地区DSM/DEM(三)——可信度分割
李国春(接上)
避坑!瑞萨RZ/N2L用J-Link下载调试的那些‘坑’(从驱动版本到硬件架构选择)
本文详细解析了瑞萨RZ/N2L开发中使用J-Link调试时常见的兼容性问题与解决方案,包括驱动版本选择、SWD连接优化及e2 studio调试技巧。特别针对硬件架构与驱动版本的匹配问题提供了实用对照表,帮助开发者高效避开调试陷阱,提升开发效率。
新的开始
新的开始
Vivado2019.1 ZYNQ7020无Uart SDK调试打印调试信息xil_printf
Vivado2019.1 ZYNQ7020无Uart SDK调试打印调试信息xil_printf
新的开始~~
<br />新的开始~~新的开始~~新的开始~~
从菜鸟到大神:VSCode助力HTML开发全攻略
本文全面介绍 VSCode 在 HTML 开发中的高效应用。先引导读者完成 VSCode 的安装与个性化设置,助其快速适应开发环境;接着推荐 Live Server、Prettier 等实用插件,实现实时预览、代码格式化等功能,提升开发效率。通过详细的开发实战步骤,从新建文件到添加样式,带领读者掌握 HTML 基础结构与常用标签使用。还分享代码片段管理、多人协作等进阶技巧,解决常见开发问题。旨在帮助开发者利用 VSCode,轻松高效完成 HTML 开发,打造优质网页。
C#与欧姆龙PLC 通信——Fins Tcp协议
该调试助手专门为了帮助大家学习以及测试Fins-Tcp通信,下面进行详细介绍。
新的开始,新的气象
新的开始,新的气象,加油 转载于:https://www.cnblogs.com/mytec/archive/2011/08/16/2141294.html
假人有限元模型
假人模型,车辆碰撞假人有限元模型,适合做乘员安全的研究者利用
新的开始记录
新的开始
pscad IEEE标准系统搭建说明
pscad IEEE标准系统搭建说明,包含典型的IEEE 9节点、14节点、30节点、39节点和118节点系统。内含标准测试系统的原始数据和潮流结果。
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
一个新的开始
一个新的开始
蓝牙模块HM-10手册
蓝牙模块HM-10手册,该手册对蓝牙模块HM-10进行了详细的介绍和使用方法以及一些AT指令。
新的一年新的开始
2016新的一年新的开始
新的开始,新的努力
开始的不仅使我们的新篇章,更是
新的一天,新的开始
新的一天,新的开始,希望大家关注我的博客
上海,新的开始
由于在6月份的一次考试中,没能脱颖而出。终于还是离开了那个我熟悉而又不舍的地方,大学。生活的地方虽然是那么的不堪,甚至让人觉得是非常不妥的。但是,怀着对理想生活地追求,对现实生活的恐惧。想在大学中获得更多的知识和锻炼机会,还有那些想做却一直没有做的事情(谈场恋
180
1715
247
258
225
75
244
596

被折叠的 条评论
为什么被折叠?



