Fix ionic/android build error in declare-styleable FontFamilyFont

扫码器USB键盘报告描述符数据格式解析 Byte0用于判断Shift是否按下,当按下时Byte0的Bit1会置1,即0x02,若未按下,Bit为0,即0x00。0x00 0x00 0x00 0x00 0x00 0x00 0x00--->>未按下Shift。0x00 0x00 0x00 0x00 0x00 0x00 0x00--->>按下Shift。0x00 0x04 0x00 0x00 0x00 0x00 0x00--->>输出A。0x00 0x04 0x00 0x00 0x00 0x00 0x00--->>输出a。 阅读详情

完整报错信息

Error: /Users/**/platforms/android/gradlew: Command failed with exit code 1 Error output:
ERROR: In <declare-styleable> FontFamilyFont, unable to find attribute android:fontVariationSettings
ERROR: In <declare-styleable> FontFamilyFont, unable to find attribute android:ttcIndex


FAILURE: Build failed with an exception.

* What went wrong:
Execution failed for task ':processReleaseResources'.
> com.android.ide.common.process.ProcessException: Failed to execute aapt

* Try:
Run with --stacktrace option to get the stack trace. Run with --info or --debug option to get more log output.

网上的一些方法是升级相关的一些编译SDK,报错的原因是平台版本的不兼容,我这里的解决方案是降级处理, 同样达到效果。

解决方案

  1. 经过查看之前的android版本是6.3.0 ,$ cordova platform ls

    Installed platforms:
      android 6.3.0
      ios 4.3.1
  2. 备份platform/android文件夹 (目的是不会被降级操作覆盖之前对项目的设置)

  3. 开始降级处理:cordova platform update android@6.2.3

  4. 从备份的文件夹中恢复之前的所有设置

  5. 重新打包,编译正常,ok

深入解析 OpenClaw(小龙虾)源码:架构设计与核心实现 OpenClaw用清晰、工程化的代码结构,将复杂的Agent交互流程变成了可管理、可扩展的流水线。无论是想深入了解Agent系统设计,还是希望二次开发定制自己的AI助理,阅读OpenClaw源码都是一次绝佳的学习旅程。希望本文能帮助你快速掌握OpenClaw的核心脉络。如果你对某个模块(如技能开发、安全机制)感兴趣,欢迎继续探讨。本文基于OpenClaw社区版本源码分析,具体实现可能随版本迭代有所调整,请以最新源码为准。 阅读详情

相关推荐

springboot 启动方式 装配流程 自定义starter 文件加载顺序 常见设计模式

springboot 启动方式 装配流程 自定义starter 文件加载顺序 常见设计模式

sv 938

关于字体图标在firefox上本地访问无法显示的问题分析

2019独角兽企业重金招聘Python工程师标准>>> ...

weixin_34297704的博客 456

基于STM32的智能循迹小车设计(基础版)

基于STM32的智能循迹小车设计 硬件准备 1、小车底盘+四直流电机(带轮) 2、STM32F103C8T6核心板 3、12V 8700mAh锂电池(可以用几节18650锂电池) 4、循迹模块 选择的是TCRT500L,五路集成在一起,集成度比较高,但是可能不如五个单独的循迹模块好用 5、L298N电机驱动模块 四驱车为啥用L298N电机驱动模块? 可以把左边的两个电机并联,用输出A控制。把右边的两个电机并联,用输出B控制。 12V供电接电源正极,供电GND接电源负极和核心板GND,5V供电接核心

Rendezvous1的博客 3万+

前端报错集合(自用>>>持续更新)

自用

叶 583

win2012 r2 + IIS8.5 伪静态设置脚本映射

win2012 r2 + IIS8.5 伪静态设置脚本映射,网站用的.net fromwork 2.0 ,应用程序池设置了32位支持

xueking87的专栏 3242

Vue 实现华视身份证读卡器功能

在www.downcc.com下载“华视cvr100驱动”安装程序; 华视电子官网有相应的文档说明和程序下载 一、服务安装 选择安装目录: 启动读卡服务: 安装成功会有如图所示: 注意事项: 安装开发包必须使用管理员权限,因为windows服务和读卡器设备驱动程序均需要管理员权限,否则会安装失败。 win10需要修改组策略才有管理员权限。 二、服务的使用 打开浏览器,输入地址http://127.0.0.1:19196/mainpage,回车 点击openDevice: 点.

zyqgt960812的博客 6503

【HTML5】浏览器不能显示字体报错Failed to decode downloaded font问题解决

把网上的项目中字体通过链接保存下来在本地上使用,在本地服务器上运行站点发现,用Chrome浏览器访问的时候,出现错误提示不能正常显示字体,怎么解决呢,看看怎么搞。

4013

Pinocchio 安装教程|机器人学的必备库

安装pinocchio,不要安装pip3 install pinocchio!

darcsdn 1663

mui小图标找不到是因为路径问题,downloadable font: download failed

firefox 报错是这个downloadable font: download failed (font-family: chrome 报这样的错Failed to load resource: net::ERR_FILE_NOT_FOUND" 都是打包后引用路径的问题,还是firefox调试的更舒服… 打包后css中引用字体的路径变成 dist/static/css/static/fonts/...

tan1015956962的博客 4783

SAP 物料主数据 Forecasting 视图,别把预测只当成一个数字字段

摘要(150字): SAP S/4HANA物料主数据的Forecasting视图常被忽视,但对依赖历史消耗规律的物料至关重要。该功能基于工厂维度的历史消耗数据,结合预测参数自动计算未来需求,动态调整重订货点和安全库存。预测模板(Forecast Profile)能标准化参数设置,而消耗数据(Consumption Values)的质量直接影响预测结果。预测值作为MRP输入,需注意保存操作才能生效。自动重订货点功能通过分析消耗波动和服务水平,实现库存策略的动态优化。Individual Forecast功能则

2007 年 ~ 2025 年,深耕 SAP 技术 18 年 1437

【2026年华为暑期实习/秋招(AI)-8月5日-第一题- 选择题】(题目+思路+Java&C++&Python解析+在线测试)

摘要: 本文包含20道选择题,涵盖深度学习、数值计算、概率统计、线性代数及机器学习等领域。重点考察了Softmax的数值稳定性实现(减去最大值)、视觉问答任务(图像+问题→答案)、分层强化学习的奖惩计算、欧氏距离与余弦相似度、反向传播梯度计算、SVD降维存储优化、贝叶斯概率推断、插值多项式等。此外,涉及逻辑回归评价指标(不含MSE)、端侧推理内存因素(中间激活)、集中趋势度量(均值)、Householder变换性质、早期停止正则化、梯度矩阵秩与优化、在线学习特性及大模型训练技巧(如学习率预热、梯度裁剪)等知

m0_73659489的博客 199

用vue3.0脚手架用cnpm下载element-plus font-icon报错

最近在用vue3.0+element-plus写一个后台管理系统,但是在main.js导入element-plus,cmd报element-icons模块丢失,原因是element-plus更新了,最新版本为 "^1.1.0-beta.21",可能不兼容,降版本就可以解决,试过vue add element-plus,但是版本太低了,很多字体图标不显示,建议手动降版本,就能够解决. cnpm install element-plus@1.1.0-beta.20 --save ...

qq_27831577的博客 723

OpenClaw实战系列01:OpenClaw接入飞书机器人全接入指南 + Ollama本地大模型

通过 OpenClaw + Ollama + 飞书的组合,我们成功搭建了一个完全私有、免费、可定制的AI助理。它不仅能在日常聊天中提供帮助,还能通过OpenClaw强大的“技能”体系,真正去操作你的电脑、管理文件、甚至执行代码。这套方案将数据留在本地,既保证了隐私安全,又锻炼了动手能力。现在,去给你的AI助理添加更多酷炫的技能吧!

PeterPan的博客 1万+

火狐自定义字体失败 downloadable font: no supported format found

downloadable font: bad search range (font-family: "FontAwesome" style:normal weight:400 stretch:100 src index:3) source: http://127.0.0.1:8080/assets/font-awesome/fonts/fontawesome-webfont.ttf?v=4.7.0 downloadable font: no supported format found (font-fa

qq_40985985的博客 2675

IDEA的使用指南

IDEA基于java的使用手册,可以最快速的上手,在使用中不断的丰富自己的使用技巧.

lwip-2.0.3

lwip是瑞典计算机科学院(SICS)的Adam Dunkels 开发的一个小型开源的TCP/IP协议栈。实现的重点是在保持TCP协议主要功能的基础上减少对RAM 的占用。

项目问题小记

Failed to decode downloaded font: 问题问题描述 问题描述 页面展示时出现方框,未能正常显示字体。直接上图 控制台提示 F12查看了一下文件路径,路径下存在文件,但是未能解码成功 查看了一些其他博主的解决问题,有的博主提出了在pom.xml下修改属性为false,不过这样会导致项目的过滤器无法使用。还有博主提出可能是资源文件在解压过程中出现了问题,考虑到自己的...

还有头发的沛沛的博客 222

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

记一次elementUI Icon 加载无效的问题。并且提示错误 Failed to decode downloaded font:

问题在于webpack的loader中。检查了一下发现有两个相同的file-loader的配置,删除其中一个即可。 转载于:https://www.cnblogs.com/CyLee/p/8425160.html

dicha7140的博客 861

数学建模模型总结

这是本人在两年内准备参加数学建模竞赛搜集到的模型资料,已经经过了本人的筛选和整理,希望能够对准备参加数学建模竞赛的学弟学妹们提供一些帮助!

ElementUI使用本地CDN时文件图标字体无法正常显示的解决方法

问题描述 官方CDN:引入并使用图标字体无异常 <link rel="stylesheet" href="https://unpkg.com/element-ui/lib/theme-chalk/index.css"> <script src="https://unpkg.com/element-ui/lib/index.js"></script> 将以上js和css地址复制到浏览器地址栏,下载到本地并使用,图标字体丢失 <link href="./stati..

weixin_41545048的博客 2010

Failed to decode downloaded font: http://localhost:8080/demo/css/ui/element/fonts/element-icons.woff

Failed to decode downloaded font: http://localhost:8080/demo/css/ui/element/fonts/element-icons.woff

weixin_51689532的博客 3164

Failed to decode downloaded font,解决方法

项目使用font-awesome,刚下载部署的时候还没有问题,同步到线上的时候突然出现 Failed to decode downloaded font 后来重新下载了一次font-awesome ,覆盖到项目目录。解决了 转载于:https://www.cnblogs.com/yumufeng/p/7092941.html...

weixin_30810583的博客 1361

Android Bugs—— Error:In declare-styleable FontFamilyFont, unable to find attribute android:font

Error: Error:In &lt;declare-styleable&gt; FontFamilyFont, unable to find attribute android:fontVariationSettings 原因: 主要是因为你引入第三方开源库的最新版本,而本地的编译环境太低造成。 解决方法: 解决方法有两个: 1、升级本地环境 2、降低第三方开源库的版本...

小欣儿的专栏 685

Error:In <declare-styleable> FontFamilyFont, unable to find attribute android:font

android的报错提示:Error:In <declare-styleable> FontFamilyFont, unable to find attribute android:font 我去百度找了 说compileSdkVersion 和buildToolsVersion 的版本不对应,我就按照这种提示修改之后还是不行了 我继续去百度找找看,发现上说是会不会是 compileSdkVersion 和buildToolsVersion 的版本太低了,就把这两个的版本改成最新的,结果就没有

彬sir哥的博客 2650

In FontFamilyFont, unable to find attribute android:font的报错处理

Information:Gradle tasks [:app:generateDebugSources, :app:mockableAndroidJar, :app:prepareDebugUnitTestDependencies, :app:generateDebugAndroidTestSources] Error:In &lt;declare-styleable&gt; FontFamily...

weixin_34087503的博客 282

Error:In declare-styleable FontFamilyFont, unable to find attribute android:font

今天在Android Stuido重新编译项目,结果发现居然build failed!报的错如下: Error:In &lt;declare-styleable&gt; FontFamilyFont, unable to find attribute android:font Error:In &lt;declare-styleable&gt; FontFamilyFont, unable ...

Heijinbaitu的博客 3381

Cordova 打包错误 ERROR: In declare-styleable FontFamilyFont, unable to find attribute android:

问题描述 今天在使用 “cordova build android” 的时候,发现报下面的错误 ERROR: In &lt;declare-styleable&gt; FontFamilyFont, unable to find attribute android:fontVariationSettings ERROR: In &lt;declare-styleable&gt; FontF...

kongxx的专栏 1816

关于Android构建出现Error:In <declare-styleable> FontFamilyFont, unable to find attribute android:fontVar问题...

2019独角兽企业重金招聘Python工程师标准>>> ...

weixin_34306676的博客 323

设置font-family时需要注意的问题

font-family属性用于设置字体。网页中常用的字体有宋体、微软雅黑、黑体等,例如将网页中所有段落文本的字体设置为宋体,可以使用如下CSS样式代码: <style> p { font-family: "微雅软黑"; } div { font-family: "宋体"; ...

qq_43437571的博客 8322
上一篇: 解决 npm i 及 yarn install 都无法进行安装的问题和node-sass安装太慢的问题
下一篇: 关于js单线程异步的测试
Wang's Blog
博客等级 码龄12年 7440粉丝 2427原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

Wang's Blog

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值