[leetcode] 174. Dungeon Game

本文介绍了一个基于动态规划解决的游戏问题——骑士救公主。目标是最小化骑士的初始生命值以确保能成功救出公主。文章详细解释了算法原理,并提供了一个实现示例。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

The demons had captured the princess (P) and imprisoned her in the bottom-right corner of a dungeon. The dungeon consists of M x N rooms laid out in a 2D grid. Our valiant knight (K) was initially positioned in the top-left room and must fight his way through the dungeon to rescue the princess.

The knight has an initial health point represented by a positive integer. If at any point his health point drops to 0 or below, he dies immediately.

Some of the rooms are guarded by demons, so the knight loses health (negative integers) upon entering these rooms; other rooms are either empty (0's) or contain magic orbs that increase the knight's health (positive integers).

In order to reach the princess as quickly as possible, the knight decides to move only rightward or downward in each step.

Write a function to determine the knight's minimum initial health so that he is able to rescue the princess.

For example, given the dungeon below, the initial health of the knight must be at least7 if he follows the optimal path RIGHT-> RIGHT -> DOWN -> DOWN.

-2 (K)

-3

3

-5

-10

1

10

30

-5 (P)

Notes:

  • The knight's health has no upper bound.

  • Any room can contain threats or power-ups, even the first room the knight enters and the bottom-right room where the princess is imprisoned.

这道题是小游戏“骑士救公主”,非常有意思,想想都有些小激动。每个房间会有恶魔(负数减血)或者血包(正数加血,空房间也可以认为是数值0的血包),骑士需从左上入口到达右下囚牢救出公主,中间只能向下或者向右行进,任何时刻当骑士血量到0或者0以下立即死亡,让求顺利救出公主所需要的最小初始血量,难度为Hard。

这是一道典型的动态规划题目。以上图为例,若要求出进入中心房间[-10]的最小血量,则需要知道进入其右侧房间[1]和下方房间[30]的最小血量,选出其中较小的就是下一步进入的房间,如果进入下一房间的最小血量比当前房间[-10]数值大,表明骑士进入当前房间之前需要有一定的血量以保证达到进入下一房间的最小血量,反之表明骑士进入当前房间之前存活(血量至少为1)即可。依此即可计算出进入当前房间[-10]所需的最小血量。而右下角囚禁公主的房间作为初始状态可以直接得到进入所需的最小血量,这样递推即可得出进入入口处房间所需的最小血量,保证骑士顺利救出公主。具体代码:

class Solution {
public:
    int calculateMinimumHP(vector<vector<int> > &dungeon) {
        int row = dungeon.size();
        int col = dungeon[0].size();
        vector<int> line(col, INT_MAX);
        vector<vector<int>> health(row, line);
        
        for(int i=row-1; i>=0; i--) {
            for(int j=col-1; j>=0; j--) {
                int down, right, minHealth;
                if(i == row-1) down = INT_MAX;
                else down = health[i+1][j];
                if(j == col-1) right = INT_MAX;
                else right = health[i][j+1];
                minHealth = ((i == row-1) && (j == col-1)) ? 1 : min(down, right);
                if(minHealth - dungeon[i][j] > 0) health[i][j] = minHealth - dungeon[i][j];
                else health[i][j] = 1;
            }
        }
        
        return health[0][0];
    }
};
如果需要骑士所走的路径,从入口处遍历health,选择右侧和下方的两个房间进行比较,health值较小的是下一步的房间,顺次得到骑士所走的路径。

### 如何在 VSCode 中安装和配置 LeetCode 插件以及 Node.js 运行环境 #### 安装 LeetCode 插件 在 VSCode 的扩展市场中搜索 `leetcode`,找到官方提供的插件并点击 **Install** 按钮进行安装[^1]。如果已经安装过该插件,则无需重复操作。 #### 下载与安装 Node.js 由于 LeetCode 插件依赖于 Node.js 环境,因此需要下载并安装 Node.js。访问官方网站 https://nodejs.org/en/ 并选择适合当前系统的版本(推荐使用 LTS 版本)。按照向导完成安装流程后,需确认 Node.js 是否成功安装到系统环境中[^2]。 可以通过命令行运行以下代码来验证: ```bash node -v npm -v ``` 上述命令应返回对应的 Node.js 和 npm 的版本号。如果没有正常返回版本信息,则可能未正确配置环境变量。 #### 解决环境路径问题 即使完成了 Node.js 的安装,仍可能出现类似 “LeetCode extension needs Node.js installed in environment path” 或者 “command ‘leetcode.toggleLeetCodeCn’ not found” 的错误提示[^3]。这通常是因为 VSCode 未能识别全局的 Node.js 路径或者本地安装的 nvm 默认版本未被正确加载[^4]。 解决方法如下: 1. 手动指定 Node.js 可执行文件的位置 在 VSCode 设置界面中输入关键词 `leetcode`,定位至选项 **Node Path**,将其值设为实际的 Node.js 安装目录下的 `node.exe` 文件位置。例如:`C:\Program Files\nodejs\node.exe`。 2. 使用 NVM 用户管理工具调整默认版本 如果通过 nvm 工具切换了不同的 Node.js 版本,请确保设置了默认使用的版本号。可通过以下指令实现: ```bash nvm alias default <version> ``` 重新启动 VSCode 后测试功能键是否恢复正常工作状态。 --- #### 配置常用刷题语言 最后一步是在 VSCode 设置面板中的 LeetCode 插件部分定义个人习惯采用的主要编程语言作为默认提交方式之一。这样可以减少频繁修改编码风格的时间成本。 --- ### 总结 综上所述,要在 VSCode 上顺利启用 LeetCode 插件及其关联服务,除了基本插件本身外还需额外准备支持性的后台框架——即 Node.js 应用程序引擎;同时针对特定场景下产生的兼容性障碍采取针对性措施加以修正即可达成目标[^3]。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值