Shell编程中的特殊符号与用途

编程 专栏收录该内容
¥29.90 ¥99.00
389篇文章

Shell编程是在Linux和其他类Unix操作系统中进行脚本编写和自动化任务的一种方式。在Shell脚本中,特殊符号具有特定的用途和功能。本文将详细介绍一些常用的特殊符号,并提供相应的源代码示例。

  1. #(井号):注释符号
    在Shell脚本中,以#开头的行被视为注释,用于添加解释、文档和注释说明。注释行将被Shell解释器忽略,不会执行其中的命令。

示例:

#!/bin/bash

# 这是一个Shell脚本示例
# 该脚本用于打印当前日期和时间

echo "当前日期和时间:"
date
  1. (美元符号):变量引用在Shell脚本中,(美元符号):变量引用 在Shell脚本中,
YOLO11涨点优化:SPPF原创自研创新 | SPPF创新结构,重新设计全局平均池化层和全局最大池化层,增强全局视角信息和不同尺度大小的特征 SPPF_improve利用全局平均池化层和全局最大池化层,加入一些全局背景信息和边缘信息,从而获取全局视角信息并减轻不同尺度大小所带来的影响 阅读详情

相关推荐

用化学方法nmp溶剂从佳能cmos传感器上剥离拜耳矩阵和微透镜

将光刻胶暴露于 NMP 溶剂中 10-15 分钟,并进行轻微的机械搅拌,将溶解的光刻胶从基材表面带走,即可去除大部分光刻胶,之后再进行第二次溶剂浴,以洗去微量含有光刻胶的溶剂。我还担心传感器的校准问题,我觉得可以大致解决这个问题,比如在安装面上用刻度尺标记三个螺丝的位置,然后数着拧出螺丝的圈数,直到听到“咔哒”声(螺纹完全拧出)。我还担心传感器的校准问题,我觉得可以大致解决这个问题,比如在安装面上用刻度尺标记三个螺丝的位置,然后数着拧出螺丝的圈数,直到听到“咔哒”声(螺纹完全拧出)。在我看来,这是必读的;

qq_40247880的博客 1479

7系列ZYNQ硬件调试:Vitis无法识别ARM DAP的排查与解决

本文详细分析了Xilinx 7系列ZYNQ芯片在Vitis开发环境中无法识别ARM DAP的常见问题及解决方案。从硬件设计检查(电源系统、时钟电路)、JTAG连接诊断到软件环境排查,提供了全面的调试指南。特别针对ARM DAP初始化失败的情况,给出了实用的排查步骤和预防措施,帮助开发者快速定位和解决类似问题。

weixin_33737134的博客 517

Flutter加载本地HTML的优雅解决方案:轻松实现富文本展示

通过以上步骤,我们实现了Flutter加载本地HTML的完整流程,并简单介绍了如何通过WebView与HTML页面进行交互。HTML文件作为一种灵活、易维护的富文本展示方式,能有效提升Flutter应用的内容呈现能力。这种方法在展示新闻、资讯或帮助文档等内容时非常有用,能够让开发者灵活调整内容的样式和排版。希望这篇文章能对你在Flutter开发中的HTML加载有所帮助!

四楼没电梯的专栏 3649

【SOC估计】基于EKF与二阶RC等效电路模型的锂电池SOC在线估计算法实现与仿真分析

本文详细介绍了基于扩展卡尔曼滤波(EKF)与二阶RC等效电路模型的锂电池SOC在线估计算法。通过Matlab仿真分析,展示了该算法如何实现高精度SOC估计,相比传统方法显著提升估计精度与鲁棒性,适用于电动汽车、储能系统等关键领域。

1114

YOLO数据集实战:无人机与电力巡检必知10大公开数据集

在目标检测工程落地中,数据质量往往比网络结构更决定模型上限。以YOLO系列为代表的检测框架,其训练效果高度依赖标注规范、场景覆盖和格式兼容性。从航拍视角的VisDrone、UAVDT到电力巡检中的绝缘子缺陷数据集,再到工业阀门与烟火检测,每一个细分场景都对小目标识别、复杂背景和类别不平衡提出挑战。理解数据集的标签结构、清洗技巧以及转换为YOLO格式的流程,是提升模型泛化能力的关键前提。本文盘点10个在无人机、电力巡检及工业部件识别中实测有效的数据集,讲解它们的适用YOLO任务、训练坑点和预处理策略,帮助开发

weixin_29058331的博客 247

LeRobot 入门教程(九)使用 Android、iOS 手机控制机械臂

本指南详细介绍了如何使用iOS/Android手机远程控制机器人。内容包括:1)安装依赖(pip install leroobot[phone]);2)平台支持说明(iOS需HEBI Mobile I/O应用/Android用WebXR);3)手机方向校准方法;4)控制模式设定(按钮/手势);5)示例脚本使用(遥操作/数据记录/回放/策略评估);6)关键参数配置(运动学/安全限制/夹爪控制);7)故障排查方法。支持ROS2集成,提供URDF文件处理、逆向运动学计算和实时可视化功能,适用于物理机器人和仿真环境

2506_90492529的博客 1659

手把手教你学Simulink--基于高频与高速信号处理的滤波器场景实例:毫米波雷达中匹配滤波器的多目标分辨仿真

在自动驾驶、智能交通和工业感知等领域,毫米波雷达(mmWave Radar)因其高分辨率全天候工作和抗电磁干扰能力,成为关键的感知传感器。其核心信号处理算法之一是匹配滤波器(Matched Filter),用于在强噪声背景下最大化信噪比(SNR),实现对微弱目标的检测。在调频连续波(FMCW, Frequency-Modulated Continuous Wave)雷达中,发射信号为线性调频(Chirp)信号。当信号遇到多个目标时,回波是多个延迟版本的叠加。

MHD0815的博客 135

matlab 点云按高程进行赋色【2024最新版】

首先按照Z轴方向求取所在点云的高程极值(包括高程最大值与最小值),然后将高程归一化到0~255范围内,最后采用matlab中的colormap颜色渲染函数进行赋色并保存渲染结果到点云。

点云侠的博客 3343

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain&#39;s apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath(&#39;DeepLearnToolbox&#39;));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand(&#39;state&#39;,0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W&#39;); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand(&#39;state&#39;,0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = &#39;sigm&#39;;%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, &#39;Too big error&#39;);```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand(&#39;state&#39;,0)sae = saesetup([784 100]);sae.ae{1}.activation_function = &#39;sigm&#39;;sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)&#39;)% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = &#39;sigm&#39;;nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, &#39;Too big error&#39;);```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x&#39;,28,28,60000))/255;test_x = double(reshape(test_x&#39;,28,28,10000))/255;train_y = double(train_y&#39;);test_y = double(test_y&#39;);%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you&#39;ll get around 1.2% errorrand(&#39;state&#39;,0)cnn.layers = { struct(&#39;type&#39;, &#39;i&#39;) %input layer struct(&#39;type&#39;, &#39;c&#39;, &#39;outputmaps&#39;, 6, &#39;kernelsize&#39;, 5) %convolution layer struct(&#39;type&#39;, &#39;s&#39;, &#39;scale&#39;, 2) %sub sampling layer struct(&#39;type&#39;, &#39;c&#39;, &#39;outputmaps&#39;, 12, &#39;kernelsize&#39;, 5) %convolution layer struct(&#39;type&#39;, &#39;s&#39;, &#39;scale&#39;, 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, &#39;Too big error&#39;);```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand(&#39;state&#39;,0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, &#39;Too big error&#39;);%% ex2 neural net with L2 weight decayrand(&#39;state&#39;,0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);%% ex3 neural net with dropoutrand(&#39;state&#39;,0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);%% ex4 neural net with sigmoid activation functionrand(&#39;state&#39;,0)nn = nnsetup([784 100 10]);nn.activation_function = &#39;sigm&#39;; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);%% ex5 plotting functionalityrand(&#39;state&#39;,0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = &#39;softmax&#39;; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand(&#39;state&#39;,0)nn = nnsetup([784 20 10]); nn.output = &#39;softmax&#39;; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

Statistics and Machine Learning Toolbox

Statistics and Machine Learning Toolbox(带书签),MATLAB统计学习工具

OV9734 DATASHEET,完整规格书

OV9734完整规格书,包括电气参数,尺寸规格,寄存器配置表等

pscad IEEE标准系统搭建说明

pscad IEEE标准系统搭建说明,包含典型的IEEE 9节点、14节点、30节点、39节点和118节点系统。内含标准测试系统的原始数据和潮流结果。

上一篇: 使用jQuery改变元素的类名
下一篇: Qt程序中使用延时函数的方法
普通网友
博客等级 码龄3年 322粉丝 763原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符  | 博主筛选后可见
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值