HCIA路由器配置实践：RIP实验-优快云博客

本文链接：https://blog.youkuaiyun.com/StriverNumber1/article/details/113404500

该博客详细介绍了HCIA寒假作业中关于RIP协议的配置实验，包括全网可达、避免环回宣告、路由汇总、更新安全及收敛速度优化等步骤。通过配置IP地址、宣告路由、设置路由汇总、启用认证以及调整定时器来实现目标要求。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

HCIA寒假作业RIP实验
要求；
1 全网可达
2 R4的环回不能被宣告
3 R2，R3,R4各有两个环回需要汇总
4 保证更新安全
5 加快收敛速度

在这里插入图片描述
1、配完IP地址和环回后宣告

在这里插入图片描述

宣告完后就可全网可达

2、lookback2 配100.1.1.1 24 并且分发

3、汇总环回

[r2]in
[r2]info-center
[r2]interface g0/0/1
[r2-GigabitEthernet0/0/1]rip su
[r2-GigabitEthernet0/0/1]rip summary-address
[r2-GigabitEthernet0/0/1]rip summary-address 192.168.1.0 255.255.255.0

[r3]in
[r3]info-center
[r3]interface g0/0/0
[r3-GigabitEthernet0/0/0]rip su
[r3-GigabitEthernet0/0/0]rip summary-address 192.168.2.0 255.255.255.0

[r4]in
[r4]info-center
[r4]interface g0/0/1
[r4-GigabitEthernet0/0/1]rip su
[r4-GigabitEthernet0/0/1]rip summary-address
[r4-GigabitEthernet0/0/1]rip summary-address 192.168.3.0 255.255.255.0

4、保证更新安全
配置空接口
[r2]ip route-static 192.168.1.0 24 NULL 0
[r3]ip route-static 192.168.2.0 24 NULL 0
[r4]ip route-static 192.168.3.0 24 NULL 0
做认证
[r2]interface g0/0/1
[r2-GigabitEthernet0/0/1]rip au
[r2-GigabitEthernet0/0/1]rip authentication-mode md
[r2-GigabitEthernet0/0/1]rip authentication-mode md5 us
[r2-GigabitEthernet0/0/1]rip authentication-mode md5 usual 123

[r3]interface g0/0/0
[r3-GigabitEthernet0/0/0]rip au
[r3-GigabitEthernet0/0/0]rip authentication-mode
[r3-GigabitEthernet0/0/0]rip authentication-mode md
[r3-GigabitEthernet0/0/0]rip authentication-mode md5 us
[r3-GigabitEthernet0/0/0]rip authentication-mode md5 usual 123

5、加快收敛速度

[r1]rip
[r1-rip-1]ve
^
Error:Ambiguous command found at ‘^’ position.
[r1-rip-1]ve
[r1-rip-1]verify-source
[r1-rip-1]version2
^
Error: Unrecognized command found at ‘^’ position.
[r1-rip-1]ti
[r1-rip-1]timers rip 15 90 60

[r2]rip
[r2-rip-1]ve
[r2-rip-1]verify-source
[r2-rip-1]version 2
[r2-rip-1]ti
[r2-rip-1]timers
[r2-rip-1]timers rip 15 60 90

[r3]rip
[r3-rip-1]ve
[r3-rip-1]verify-source
[r3-rip-1]
[r3-rip-1]
[r3-rip-1]ve
^
Error:Ambiguous command found at ‘^’ position.
[r3-rip-1]ve
[r3-rip-1]version2 2
^
Error: Unrecognized command found at ‘^’ position.
[r3-rip-1]version 2
[r3-rip-1]ti
[r3-rip-1]timers rip 15 60 90

r4]rip
[r4-rip-1]ve
[r4-rip-1]verify-source
[r4-rip-1]version 2
[r4-rip-1]ti
[r4-rip-1]timers rip 15 60 90

[r5]rip
[r5-rip-1]ve
[r5-rip-1]verify-source
[r5-rip-1]version
^
Error:Incomplete command found at ‘^’ position.
[r5-rip-1]version 2
[r5-rip-1]ti
[r5-rip-1]timers rip 15 60 90